VANDENBERG AIR FORCE BASE, Calif. – Workers at Vandenberg Air Force Base in California prepare to lift a solid rocket motor, or SRM, for NASA's Orbiting Carbon Observatory-2, the OCO-2 mission, from a transporter onto a storage chock where…
KSC-2014-1277
VANDENBERG AIR FORCE BASE, Calif. – At Vandenberg Air Force Base in California, technicians and engineers prepare a separation system ring that will be attached to NASA's Interface Region Imaging Spectrograph, or IRIS, spacecraft. The separ…
KSC-2013-2365
VANDENBERG AIR FORCE BASE, Calif. – At Vandenberg Air Force Base in California, a solid rocket motor, or SRM, for NASA's Orbiting Carbon Observatory-2, the OCO-2 mission, rests on a storage chock where it will be kept until needed.    The S…
KSC-2014-1281
VANDENBERG AIR FORCE BASE, Calif. – Teamwork is required to rotate a section of the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, for attachment on a turnover fixture in the NASA Building 836 high bay at Vandenberg Air…
KSC-2014-1298
VANDENBERG AFB – Engineers make preparations on the starboard side of the payload fairing before it is connected into place for NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lif…
KSC-2013-2579
VANDENBERG AIR FORCE BASE, Calif. – The fairing for NASA's Orbiting Carbon Observatory-2, or OCO-2, mission arrives at Vandenberg Air Force Base in California.   The fairing will protect OCO-2 during launch aboard a United Launch Alliance D…
KSC-2014-1282
VANDENBERG AIR FORCE BASE, Calif. – Workers at Vandenberg Air Force Base in California conduct a leak check on the solid rocket motors, or SRMs, for NASA's Orbiting Carbon Observatory-2, the OCO-2 mission.    The SRMs will be attached to a…
KSC-2014-1275
VANDENBERG AIR FORCE BASE, Calif. – Kennedy Space Center Resident Office personnel representing the NASA Launch Services Program at Vandenberg Air Force Base in California, display the Best Places to Work in the Federal Government plaque. N…
KSC-2013-2375
VANDENBERG AIR FORCE BASE, Calif. – The second stage for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, is suspended from the ceiling of the high bay of the Building 836 hangar on Vandenberg Air Force Base in California following i…
KSC-2014-1411
VANDENBERG AFB, Calif. – Engineers install a radial retraction system on NASA's IRIS spacecraft after its connection to the nose of an Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is t…
KSC-2013-2505
VANDENBERG AIR FORCE BASE, Calif. – At Vandenberg Air Force Base in California, technicians and engineers install a separation system ring that will be attached to NASA's Interface Region Imaging Spectrograph, or IRIS, spacecraft. The separ…
KSC-2013-2372
VANDENBERG AIR FORCE BASE, Calif. – Workers prepare to hoist sections of the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, from its shipping container in the NASA Building 836 high bay at Vandenberg Air Force Base in C…
KSC-2014-1294
VANDENBERG AIR FORCE BASE, Calif. – Workers at Vandenberg Air Force Base in California prepare to hoist a solid rocket motor, or SRM, for NASA's Orbiting Carbon Observatory-2, the OCO-2 mission, from a transporter onto a storage chock where…
KSC-2014-1278
VANDENBERG AIR FORCE BASE, Calif. – In the NASA Building 836 high bay at Vandenberg Air Force Base in California, both sections of the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, at left, have been removed from their…
KSC-2014-1305
VANDENBERG AIR FORCE BASE, Calif. – Workers at Vandenberg Air Force Base in California lift a solid rocket motor, or SRM, for NASA's Orbiting Carbon Observatory-2, the OCO-2 mission, from a transporter onto a storage chock where it will be…
KSC-2014-1279
VANDENBERG AIR FORCE BASE, Calif. – Workers prepare to attach a section of the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, onto a turnover fixture in the NASA Building 836 high bay at Vandenberg Air Force Base in Cal…
KSC-2014-1296
VANDENBERG AIR FORCE BASE, Calif. – In the Horizontal Processing Facility at Space Launch Complex 2 on Vandenberg Air Force Base in California, workers align the engine bell around the second-stage nozzle of the Delta II rocket for NASA's O…
KSC-2014-1428
VANDENBERG AFB – Engineers move the payload fairing into place for NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is takin…
KSC-2013-2512
VANDENBERG AIR FORCE BASE, Calif. – Workers prepare to remove sections of the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, from its shipping container in the NASA Building 836 high bay at Vandenberg Air Force Base in…
KSC-2014-1293
VANDENBERG AFB, Calif. – Engineers install a radial retraction system on NASA's IRIS spacecraft after its connection to the nose of an Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is t…
KSC-2013-2506
VANDENBERG AFB – Engineers move the payload fairing into place for NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is takin…
KSC-2013-2516
VANDENBERG AFB – Engineers move the payload fairing into place for NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is takin…
KSC-2013-2515
VANDENBERG AIR FORCE BASE, Calif. – A section of the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, is lifted from its shipping container in the NASA Building 836 high bay at Vandenberg Air Force Base in California.…
KSC-2014-1303
VANDENBERG AIR FORCE BASE, Calif. – The shipping container is lifted away from the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, in the NASA Building 836 high bay at Vandenberg Air Force Base in California.    The fair…
KSC-2014-1292
VANDENBERG AIR FORCE BASE, Calif. – Workers at Vandenberg Air Force Base in California lower a solid rocket motor, or SRM, for NASA's Orbiting Carbon Observatory-2, the OCO-2 mission, onto a storage chock where it will be kept until needed.…
KSC-2014-1280
VANDENBERG AIR FORCE BASE, Calif. – Workers at Vandenberg Air Force Base in California prepare to lift a solid rocket motor, or SRM, for NASA's Orbiting Carbon Observatory-2, the OCO-2 mission, from a transporter onto a storage chock where…
KSC-2014-1276
VANDENBERG AIR FORCE BASE, Calif. – The shipping container is removed from around the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, in the NASA Building 836 high bay at Vandenberg Air Force Base in California.     The…
KSC-2014-1290
VANDENBERG, AFB - Engineers and members of the IRIS-Pegasus launch team re-verify the spacecraft ahead of the next flight simulation for the mission. The work is taking place in a hangar at Vandenberg where NASA's IRIS spacecraft, short for…
KSC-2013-2460
VANDENBERG AIR FORCE BASE, Calif. – As the cover of the transportation trailer is lifted in the high bay of the Building 836 hangar on Vandenberg Air Force Base in California, the second stage for NASA's Orbiting Carbon Observatory-2 missio…
KSC-2014-1409
VANDENBERG AIR FORCE BASE, Calif. – The fairing for NASA's Orbiting Carbon Observatory-2, or OCO-2, mission arrives at Vandenberg Air Force Base in California.   The fairing will protect OCO-2 during launch aboard a United Launch Alliance D…
KSC-2014-1283
VANDENBERG AIR FORCE BASE, Calif. – The fairing for NASA's Orbiting Carbon Observatory-2, or OCO-2, mission is delivered to the high bay of NASA Building 836 at Vandenberg Air Force Base in California.   The fairing will protect OCO-2 durin…
KSC-2014-1284
VANDENBERG AFB – Engineers move the payload fairing into place for NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is takin…
KSC-2013-2517
VANDENBERG AIR FORCE BASE, Calif. – In the NASA Building 836 high bay at Vandenberg Air Force Base in California, workers hoist a section of the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, from its shipping container…
KSC-2014-1295
VANDENBERG AIR FORCE BASE, Calif. – At Vandenberg Air Force Base in California, technicians and engineers prepare a separation system ring that will be attached to NASA's Interface Region Imaging Spectrograph, or IRIS, spacecraft. The separ…
KSC-2013-2367
VANDENBERG AIR FORCE BASE, Calif. – At Vandenberg Air Force Base in California, technicians and engineers install a separation system ring that will be attached to NASA's Interface Region Imaging Spectrograph, or IRIS, spacecraft. The separ…
KSC-2013-2374
VANDENBERG AIR FORCE BASE, Calif. – In the Horizontal Processing Facility at Space Launch Complex 2 on Vandenberg Air Force Base in California, preparations are underway to install the engine bell around the second-stage nozzle of the Delta…
KSC-2014-1426
VANDENBERG AIR FORCE BASE, Calif. – In the NASA Building 836 high bay at Vandenberg Air Force Base in California, workers rotate a section of the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, following its removal from…
KSC-2014-1304
VANDENBERG AFB – Engineers move the payload fairing into place for NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is takin…
KSC-2013-2513
VANDENBERG AIR FORCE BASE, Calif. – The shipping container transporting the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, is delivered into the NASA Building 836 high bay at Vandenberg Air Force Base in California.…
KSC-2014-1289
VANDENBERG AIR FORCE BASE, Calif. – The fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, comes into view as its shipping container is removed in the NASA Building 836 high bay at Vandenberg Air Force Base in California.…
KSC-2014-1291
VANDENBERG AIR FORCE BASE, Calif. – At Vandenberg Air Force Base in California, technicians and engineers prepare a separation system ring that will be attached to NASA's Interface Region Imaging Spectrograph, or IRIS, spacecraft. The separ…
KSC-2013-2366
VANDENBERG AFB, Calif. – Engineers prepare to connect NASA's IRIS spacecraft to the nose of an Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Ai…
KSC-2013-2476
VANDENBERG AFB – Engineers move the payload fairing into place for NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is takin…
KSC-2013-2510
VANDENBERG AIR FORCE BASE, Calif. – At Vandenberg Air Force Base in California, technicians and engineers install a separation system ring that will be attached to NASA's Interface Region Imaging Spectrograph, or IRIS, spacecraft. The separ…
KSC-2013-2371
VANDENBERG AIR FORCE BASE, Calif. – In the NASA Building 836 high bay at Vandenberg Air Force Base in California, workers prepare to replace the lid on the shipping container that delivered the fairing for NASA's Orbiting Carbon Observatory…
KSC-2014-1306
VANDENBERG AIR FORCE BASE, Calif. – In the NASA Building 836 high bay at Vandenberg Air Force Base in California, workers position a section of the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, onto a mobile fairing tr…
KSC-2014-1301
VANDENBERG AIR FORCE BASE, Calif. – In the NASA Building 836 high bay at Vandenberg Air Force Base in California, workers steady a section of the fairing for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, attached to a turnover fix…
KSC-2014-1300
VANDENBERG AIR FORCE BASE, Calif. – Workers prepare to remove the cover of the transportation trailer protecting the second stage for NASA's Orbiting Carbon Observatory-2 mission, or OCO-2, in the high bay of the Building 836 hangar on Vand…
KSC-2014-1408