Inside the Rotation, Processing and Surge Facility (RPSF) at NASA’s Kennedy Space Center in Florida, technicians lift the right aft motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space La…
Artemis I Booster Segments Lift to Work Stand and Silhouettes
Technicians ready two NASA Space Launch System (SLS) solid rocket boosters for mating to the rocket’s two aft skirts on June 16, 2020, inside Kennedy Space Center’s Rotation, Processing and Surge Facility. Together, the twin boosters provid…
Artemis I Booster Segments Uncap
Engineers and technicians process the right forward center segment of the Space Launch System solid rocket boosters for the Artemis II mission inside the Rotation, Processing and Surge Facility (RPSF) at NASA’s Kennedy Space Center in Flori…
Artemis II Booster Processing - Segment Cover Removal and Inspec
NASA Administrator Jim Bridenstine (right), accompanied by Jacobs employees, views Artemis I booster hardware inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida on July 27, 2020. Manufactured by Nor…
NASA Administrator, Jim Bridenstine, Views Artemis Booster Proce
The Northrop Grumman-manufactured right aft exit cone, the second of two for the Space Launch System’s solid rocket boosters, is in view inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida on Dec. 9,…
SLS Booster Aft (Right) Exit Cone Arrival
Silhouetted against the bright Florida sunlight outside, a worker with NASA’s Exploration Ground Systems (EGS) applies bright red paint to the agency’s “worm” logo taking shape on the side of an Artemis I solid rocket booster segment inside…
Worm Logo Painting on SLS Booster Segments
Workers with NASA’s Exploration Ground Systems (EGS) use a laser projector and green tape to mask off the shape of the agency’s “worm” logo on the side of an Artemis I solid rocket booster segment inside the Rotation, Processing and Surge F…
Worm Logo Painting on SLS Booster Segments
Workers with NASA’s Exploration Ground Systems and primary contractor, Jacobs, complete the painting of the agency’s iconic “worm” logo along the side of the twin Artemis II solid rocket booster motor segments inside the Rotation, Processin…
NASA Worm Logo Painting on Artemis II Booster
Technicians ready two NASA Space Launch System (SLS) solid rocket boosters for mating to the rocket’s two aft skirts on June 16, 2020, inside Kennedy Space Center’s Rotation, Processing and Surge Facility. Together, the twin boosters provid…
Artemis I Booster Segments Uncap
Kathy Lueders, at right, NASA’s associate administrator for Human Exploration and Operations, along with Exploration Ground Systems leadership view Artemis hardware inside the Rotation, Processing and Surge Facility (RPSF) at the agency’s K…
Kathy Lueders, HEO AA, Artemis Hardware in RPSF
Technicians use a massive crane to rotate and lift the right-hand aft center assembly solid rocket booster segment for NASA’s Artemis III SLS (Space Launch System) rocket onto a work stand at the Rotation, Processing, and Surge Facility at…
Artemis III SRB LAC and RAC Final Stacking, RPSF
The left-hand aft solid rocket booster segment for NASA’s Artemis III SLS (Space Launch System) rocket is removed from its shipping container ahead of processing inside the Rotation, Processing and Surge Facility at the agency’s Kennedy Spa…
Artemis III SRB Arrival Unboxing - LH (Left Hand) Aft Booster Segment
Engineers and technicians with Jacobs Engineering on the Test and Operations Contract monitor the progress as a crane is used to move one of two pathfinders, or test versions, of solid rocket booster segments for NASA’s Space Launch System…
SRB Processing Facilities Media Event
Workers with NASA’s Exploration Ground Systems and primary contractor, Jacobs, complete the painting of the agency’s iconic “worm” logo along the side of the twin Artemis II solid rocket booster motor segments inside the Rotation, Processin…
NASA Worm Logo Painting on Artemis II Booster
Technicians use a massive crane to lift the right-hand forward center assembly solid rocket booster segment for the Artemis III SLS (Space Launch System) rocket inside the Rotation, Processing, and Surge Facility at NASA’s Kennedy Space Cen…
Artemis III SRB Arrival RH Fwd Center Lift to Work Stand
Engineers and technicians process the right forward center segment of the Space Launch System solid rocket boosters for the Artemis II mission inside the Rotation, Processing and Surge Facility (RPSF) at NASA’s Kennedy Space Center in Flori…
Artemis II Booster Processing - Segment Lift to Work Stand
Kathy Lueders, at right, NASA’s associate administrator for Human Exploration and Operations, along with members of the Exploration Ground Systems and Jacobs Technology leadership view Artemis hardware inside the Rotation, Processing and Su…
Kathy Lueders, HEO AA, Artemis Hardware in RPSF
Workers with NASA’s Exploration Ground Systems (EGS) paint the bright red NASA “worm” logo on the side of an Artemis II solid rocket booster segment inside the Rotation, Processing and Surge Facility (RPSF) at Kennedy Space Center in Florid…
NASA Worm Logo Painting on Artemis II Booster
Inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida, technicians mate the right-hand motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space Launch S…
Artemis I Booster Segment Mate Pinning
Inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida, the right-hand motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space Launch System (SLS) – is…
Artemis I Booster Segment Mate Pinning
Engineers and technicians process the right forward center segment of the Space Launch System solid rocket boosters for the Artemis II mission inside the Rotation, Processing and Surge Facility (RPSF) at NASA’s Kennedy Space Center in Flori…
Artemis II Booster Processing - Segment Lift to Work Stand
Technicians ready two NASA Space Launch System (SLS) solid rocket boosters for mating to the rocket’s two aft skirts on June 16, 2020, inside Kennedy Space Center’s Rotation, Processing and Surge Facility. Together, the twin boosters provid…
Artemis I Booster Segments Uncap
Following the successful propellant grain inspection of two segments of the solid rocket boosters for NASA’s Space Launch System inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida, crews on Thursday…
Artemis II Segment Offload and Rotation
Inside the Rotation, Processing and Surge Facility (RPSF) at NASA’s Kennedy Space Center in Florida, technicians lift the right aft motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space La…
Artemis I Booster Segments Lift to Work Stand and Silhouettes
Technicians ready two NASA Space Launch System (SLS) solid rocket boosters for mating to the rocket’s two aft skirts on June 16, 2020, inside Kennedy Space Center’s Rotation, Processing and Surge Facility. Together, the twin boosters provid…
Artemis I Booster Segments Uncap
A member of the media takes a photo of the NASA worm on one of the solid rocket booster segments inside the Rotation, Processing and Surge Facility (RPSF) at Kennedy Space Center in Florida on Tuesday, July 23, 2024. The booster segments wi…
Artemis II SRBs Media Viewing Event
NASA Administrator Jim Bridenstine (center), accompanied by Jacobs and Exploration Ground Systems employees, views Artemis I booster hardware inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida on Ju…
NASA Administrator, Jim Bridenstine, Views Artemis Booster Proce
The left-hand and right-hand solid rocket booster aft segments, or bottom sections, for NASA’s Artemis III SLS (Space Launch System) rocket are seen inside the Rotation, Processing and Surge Facility at the agency’s Kennedy Space Center in…
Artemis III SRB Processing in RPSF
Inside the Rotation, Processing and Surge Facility (RPSF) at NASA’s Kennedy Space Center in Florida, technicians lift the right aft motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space La…
Artemis I Booster Segments Lift to Work Stand and Silhouettes
Inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida, Pablo Martinez, a handling, mechanical and structures engineer on the Jacobs Technology Inc. Test and Operations Support Contract, inserts the fir…
Artemis I Booster Segment Mate Pinning
A worker with NASA’s Exploration Ground Systems (EGS) finishes the first coat of the bright red “worm” logo taking shape on the side of an Artemis I solid rocket booster segment inside the Rotation, Processing and Surge Facility (RPSF) at K…
Worm Logo Painting on SLS Booster Segments
Workers with NASA’s Exploration Ground Systems (EGS) paint the bright red NASA “worm” logo on the side of an Artemis II solid rocket booster segment inside the Rotation, Processing and Surge Facility (RPSF) at Kennedy Space Center in Florid…
NASA Worm Logo Painting on Artemis II Booster
Inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida, the right-hand motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space Launch System (SLS) – is…
Artemis I Booster Segment Mate Pinning
NASA Administrator Jim Bridenstine (left), accompanied by Jacobs employees, views Artemis I booster hardware inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida on July 27, 2020. Manufactured by Nort…
NASA Administrator, Jim Bridenstine, Views Artemis Booster Proce
Kathy Lueders, second from right, NASA’s associate administrator for Human Exploration and Operations, along with members of the Exploration Ground Systems and Jacobs Technology leadership view Artemis hardware inside the Rotation, Processi…
Kathy Lueders, HEO AA, Artemis Hardware in RPSF
Kathy Lueders, second from right, NASA’s associate administrator for Human Exploration and Operations, along with members of the Exploration Ground Systems and Jacobs Technology leadership view Artemis hardware inside the Rotation, Processi…
Kathy Lueders, HEO AA, Artemis Hardware in RPSF
During a media tour of the Rotation, Processing and Surge Facility (RPSF) at NASA’s Kennedy Space Center in Florida, two cranes are used to lift one of two pathfinders, or test versions, of solid rocket booster segments for NASA’s Space Lau…
SRB Processing Facilities Media Event
Kathy Lueders, in the center at right, NASA’s associate administrator for Human Exploration and Operations, along with members of the Exploration Ground Systems and Jacobs Technology leadership view Artemis hardware inside the Rotation, Pro…
Kathy Lueders, HEO AA, Artemis Hardware in RPSF
Technicians ready two NASA Space Launch System (SLS) solid rocket boosters for mating to the rocket’s two aft skirts on June 16, 2020, inside Kennedy Space Center’s Rotation, Processing and Surge Facility. Together, the twin boosters provid…
Artemis I Booster Segments Uncap
Following the successful propellant grain inspection of two segments of the solid rocket boosters for NASA’s Space Launch System inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida, crews on Thursday…
Artemis II Segment Offload and Rotation
Inside the Rotation, Processing and Surge Facility (RPSF) at NASA’s Kennedy Space Center in Florida, technicians lift the right aft motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space La…
Artemis I Booster Segments Lift to Work Stand and Silhouettes
A worker with NASA’s Exploration Ground Systems (EGS) applies bright red paint to the agency’s “worm” logo taking shape on the side of an Artemis I solid rocket booster segment inside the Rotation, Processing and Surge Facility (RPSF) at Ke…
Worm Logo Painting on SLS Booster Segments
Inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida, technicians begin to mate the right-hand motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space…
Artemis I Booster Segment Mate Pinning
Inside the Rotation, Processing and Surge Facility at NASA’s Kennedy Space Center in Florida, the right-hand motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space Launch System (SLS) – is…
Artemis I Booster Segment Mate Pinning
Inside the Rotation, Processing and Surge Facility (RPSF) at NASA’s Kennedy Space Center in Florida, technicians lift the right aft motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space La…
Artemis I Booster Segments Lift to Work Stand and Silhouettes
The shipping container that held the right-hand motor segment – one of five segments that make up one of two solid rocket boosters for the agency’s Space Launch System (SLS) – is photographed inside the Rotation, Processing and Surge Facili…
Artemis I Booster Segment Mate Pinning
A worker removes one of the securing straps from the second of two Northrop Grumman-manufactured aft exit cones to arrive for the Space Launch System’s solid rocket boosters inside the Rotation, Processing and Surge Facility at NASA’s Kenne…
SLS Booster Aft (Right) Exit Cone Arrival
Technicians ready two NASA Space Launch System (SLS) solid rocket boosters for mating to the rocket’s two aft skirts on June 19, 2020, inside Kennedy Space Center’s Rotation, Processing and Surge Facility. Together, the twin boosters provid…
Artemis I Booster Segments Lift Operations