A crane in a clean room at NASA's Goddard Space Flight Center in Greenbelt, Md., lowers a test mass simulator (center of frame)  onto the Ambient Optical Assembly Stand or AOAS to ensure it can support the James Webb Space Telescope's Optic…
Dropping in on a Clean Room Webb Test
NASA image release August 23, 2012  What looks like a giant golden spider weaving a web of cables and cords, is actually ground support equipment, including the Optical Telescope Simulator (OSIM), for the James Webb Space Telescope. OSIM's…
The Webb Telescope's 'Golden Spider'
Engineers Tom Huber (behind MIRI) and Mick Wilks (inside black ISIM Structure) check that MIRI is integrated precisely. The engineers have to make sure that MIRI, the only instrument on the Webb telescope that 'sees' mid-infrared light, is…
Key Science Instrument Installed into Webb Structure
A technician is installing the bolts that will hold the MIRI, or Mid-Infrared Instrument, to the composite Integrated Science Instrument Module (ISIM) structure, or the black frame. The MIRI is attached to a balance beam, called the Horizon…
Key Science Instrument Installed into Webb Structure
The first six flight ready James Webb Space Telescope's primary mirror segments are prepped to begin final cryogenic testing at NASA's Marshall Space Flight Center in Huntsville, Ala.   To read more go to: <a href="http://www.nasa.gov/topic…
NASA's Webb Telescope Completes Mirror-Coating Milestone
 Webb telescope Quality Engineer Matt Magsamen and Product Assurance Engineer Jessica Lieberman inspect one of the primary mirror segments. The Webb telescope's third batch of flight mirrors now reside in the clean room at NASA's Goddard Sp…
NASA Now Has Half of all Webb Telescope's Primary Flight Mirrors
Inside NASA's giant thermal vacuum chamber, called Chamber A, at NASA's Johnson Space Center in Houston, the James Webb Space Telescope's Pathfinder backplane test model, is being prepared for its cryogenic test. Previously used for manned…
James Webb Space Telescope in NASA's giant thermal vacuum chamber
Dressed in a clean room suit, NASA photographer Desiree Stover shines a light on the Space Environment Simulator's Integration Frame inside the thermal vacuum chamber at NASA's Goddard Space Flight Center in Greenbelt, Md. Shortly after, th…
NASA Shines a Spotlight on a Webb Telescope Test
Goddard Technicians Tony Kiem (left) and George Mooney (right) guide the craned structure holding the Webb telescope's Mid-Infrared Instrument or MIRI Shield Environmental Test Unit into place in a cryogenic (cooling) test chamber. This shi…
Webb's MIRI Shield Dropping in on Dropping Temperatures
Three primary Webb telescope mirror segments sit in shipping cannisters and await opening. A mechanical integration engineer and technicians vent and prepare the mirror canisters for inspection. The mirrors have arrived at their new home at…
NASA Now Has Half of all Webb Telescope's Primary Flight Mirrors
This is the James Webb Space Telescope ETU (engineering test unit) primary mirror segment returning to the cleanroom at NASA Goddard after undergoing some tests at our new Calibration, Integration, and Alignment Facility (CIAF).  Credit: NA…
A James Webb Space Telescope Mirror Takes a Short Trip
Building a space telescope to see the light from the earliest stars of our universe is a pretty complex task. Although much of the attention goes to instruments and the giant mirrors on NASA's James Webb Space Telescope, there are other com…
The Secrets of NASA's Webb Telescope’s "Deployable Tower Assembly"
Dressed in a cleanroom suit to prevent contamination, Optics Technician Jeff Gum aligns a replacement Focal Plane Assembly (FPA) with a powerful three-dimensional microscope at NASA's Goddard Space Flight Center in Greenbelt, Md. This FPA w…
Webb Instruments Perfected to Microscopic Levels
The sunshield on NASA's James Webb Space Telescope is the largest part of the observatory—five layers of thin, silvery membrane that must unfurl reliably in space. The precision in which the tennis-court sized sunshield has to open must be…
NASA's Webb Sunshield Gives an "Open Wide" for Inspection
Caption: One dozen (out of 18) flight mirror segments that make up the primary mirror on NASA's James Webb Space Telescope have been installed at NASA's Goddard Space Flight Center.  Credits: NASA/Chris Gunn  More: Since December 2015, the…
By the Dozen: NASA's James Webb Space Telescope Mirrors
At NASA's James Webb Space Telescope's final destination in space, one million miles away from Earth, it will operate at incredibly cold temperatures of -387 degrees Fahrenheit, or 40 degrees Kelvin. This is 260 degrees Fahrenheit colder th…
NASA's James Webb Space Telescope Science Instruments Begin Final Super Cold Test at Goddard
At NASA's James Webb Space Telescope's final destination in space, one million miles away from Earth, it will operate at incredibly cold temperatures of -387 degrees Fahrenheit, or 40 degrees Kelvin. This is 260 degrees Fahrenheit colder th…
NASA's James Webb Space Telescope Science Instruments Begin Final Super Cold Test at Goddard
The optics module of the James Webb Space Telescope's primary imager, the Near Infrared Camera, arrived at NASA’s Goddard Space Flight Center in Greenbelt, Md., on Saturday, July 27, 2013. In this photo, Lockheed Martin engineers attach a l…
Webb's NIRCam
NASA image release April 13, 2011  An engineer examines the Webb telescope primary mirror Engineering Design Unit segment in the clean room at NASA's Goddard Space Flight Center, Greenbelt, Md.   It takes two unique types of mirrors working…
Webb Telescope Mirrors Arrive at NASA Goddard
Contamination from organic molecules can harm delicate instruments and engineers are taking special care at NASA to prevent that from affecting the James Webb Space Telescope (and all satellites and instruments). Recently, Nithin Abraham, a…
NASA Technology Protects Webb Telescope from Contamination
NASA image release April 14, 2011  NASA engineer Ernie Wright looks on as the first six flight ready James Webb Space Telescope's primary mirror segments are prepped to begin final cryogenic testing at NASA's Marshall Space Flight Center in…
NASA's Next Generation Space Telescope Marks Key Milestone
Engineers are checking to make sure that MIRI is precisely positioned with the ISIM as it slides into position. They have to make sure it's installed exactly where it needs to be within the width of a thin human hair. Visible is MIRI's pick…
Key Science Instrument Installed into Webb Structure
The MIRI itself weighs 181 pounds (82 kg) and is being held by a special balance beam (on the left of the photo), which is being maneuvered using a precision overhead crane by the engineer at the base of the ladder.   Photo Credit: NASA/Chr…
Key Science Instrument Installed into Webb Structure
The powerful primary mirrors of the James Webb Space Telescope will be able to detect the light from distant galaxies. The manufacturer of those mirrors, Ball Aerospace &amp; Technologies Corp. of Boulder, Colo., recently celebrated their s…
Yes, the James Webb Space Telescope Mirrors 'Can'
Engineers and technicians manually deployed the secondary mirror support structure (SMSS) of the James Webb Space Telescope's Pathfinder backplane test model, outside of a giant space simulation chamber called Chamber A, at NASA's Johnson S…
NASA Prepares Webb Telescope Pathfinder for Famous Chamber
At NASA's James Webb Space Telescope's final destination in space, one million miles away from Earth, it will operate at incredibly cold temperatures of -387 degrees Fahrenheit, or 40 degrees Kelvin. This is 260 degrees Fahrenheit colder th…
NASA's James Webb Space Telescope Science Instruments Begin Final Super Cold Test at Goddard
A view of the one dozen (out of 18) flight mirror segments that make up the primary mirror on NASA's James Webb Space Telescope have been installed at NASA's Goddard Space Flight Center.  Credits: NASA/Chris Gunn  More: Since December 2015,…
By the Dozen: NASA's James Webb Space Telescope Mirrors
No more images