CAPE CANAVERAL, Fla. -- A media event was held on the grounds near the Press Site at NASA's Kennedy Space Center in Florida where a Multi-Purpose Crew Vehicle (MPCV) is on display. The MPCV is based on the Orion design requirements for trav…
KSC-2011-5110
CAPE CANAVERAL, Fla. -- A media event was held on the grounds near the Press Site at NASA's Kennedy Space Center in Florida where a Multi-Purpose Crew Vehicle (MPCV) is on display. The MPCV is based on the Orion design requirements for trav…
KSC-2011-5114
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians look over components that will be installed on the service module bulkhead for the Orion spacecraft.      Ori…
KSC-2013-3812
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a technician on a scissor lift works on the service module for the Orion spacecraft. To the right and left are two of the…
KSC-2013-4523
CAPE CANAVERAL, Fla. -- Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians prepare the service module bulkhead for the Orion spacecraft for the move to a lifting station. The service…
KSC-2013-4104
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians use a special handling device to move the first of three fairings for installation on the service module for…
KSC-2013-4467
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians are preparing the service module for the Orion spacecraft so that the second of three fairings can be install…
KSC-2013-4471
CAPE CANAVERAL, Fla. -- A crane lowers the main parachute for installation on the Orion spacecraft inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida. Technicians dressed in clean room suits will…
KSC-2013-4365
CAPE CANAVERAL, Fla. -- Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians check the coverings on the main parachute for the Orion spacecraft. The parachute will be prepared for insta…
KSC-2013-4361
CAPE CANAVERAL, Fla. -- Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a crane is used to lift the cover off of a shipping container that carries one of three main parachutes for the Orion sp…
KSC-2013-4359
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians use a special handling device to move the second of three fairings closer for installation on the service mod…
KSC-2013-4478
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians use a special handling device to move the second of three fairings closer for installation on the service mod…
KSC-2013-4476
CAPE CANAVERAL, Fla. -- The heat shield for the Orion spacecraft has been placed on a work stand inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida. The heat shield arrived at Kennedy’s Shuttle La…
KSC-2013-4353
CAPE CANAVERAL, Fla. -- Technicians assist as a crane begins to lift one of the main parachutes for the Orion spacecraft inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida. The parachute will be p…
KSC-2013-4363
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians work on the service module bulkhead wiring for the Orion spacecraft.    Orion is the exploration spacecraft d…
KSC-2013-3810
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians positioned themselves on a scissor lift that will be raised so that they can assist in the installation of th…
KSC-2013-4479
CAPE CANAVERAL, Fla. -- A media event was held on the grounds near the Press Site at NASA's Kennedy Space Center in Florida where a Multi-Purpose Crew Vehicle (MPCV) is on display. The MPCV is based on the Orion design requirements for trav…
KSC-2011-5111
CAPE CANAVERAL, Fla. -- A media event was held on the grounds near the Press Site at NASA's Kennedy Space Center in Florida where a Multi-Purpose Crew Vehicle (MPCV) is on display. The MPCV is based on the Orion design requirements for trav…
KSC-2011-5112
CAPE CANAVERAL, Fla. -- Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians are preparing a crane to lift the service module bulkhead for the Orion spacecraft. The service module will…
KSC-2013-4103
CAPE CANAVERAL, Fla. – A view from above inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, shows the service module for the Orion spacecraft secured to a work stand. Technicians are preparing th…
KSC-2013-4524
CAPE CANAVERAL, Fla. -- Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians prepare the service module bulkhead for the Orion spacecraft for the move to a lifting station. The service…
KSC-2013-4105
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a crane begins to lift the spacecraft adapter cone for the Orion vehicle from the sta…
KSC-2013-3804
CAPE CANAVERAL, Fla. -- The heat shield for the Orion spacecraft has been placed on a work stand inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida. The heat shield arrived at Kennedy’s Shuttle La…
KSC-2013-4355
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians use a special handling device to move the second of three fairings closer for installation on the service mod…
KSC-2013-4475
CAPE CANAVERAL, Fla. -- Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a crane is used to lift the shipping container off of one of the three main parachutes for the Orion spacecraft. The par…
KSC-2013-4360
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians prepare the first of three fairings for installation on the service module for the Orion spacecraft.      The…
KSC-2013-4466
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians use a special handling device to move the first of three fairings closer for installation on the service modu…
KSC-2013-4470
CAPE CANAVERAL, Fla. -- The heat shield for the Orion spacecraft has been placed on a work stand inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida. The heat shield arrived at Kennedy’s Shuttle La…
KSC-2013-4352
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a technician on a scissor lift works on the installation of the second of three fairings on the service module for the Or…
KSC-2013-4473
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians on a scissor lift work on the installation of the second of three fairings on the service module for the Orio…
KSC-2013-4474
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a crane lowers the spacecraft adapter cone for the Orion vehicle onto a work stand. T…
KSC-2013-3808
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a crane is used to lift the spacecraft adapter cone for the Orion vehicle from the st…
KSC-2013-3806
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians have completed the installation of two of three fairings on the service module for the Orion spacecraft.…
KSC-2013-4482
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, processing work continues as a technician prepares the forward bay cover for the Orion crew module.    Orion is the explo…
KSC-2013-3799
CAPE CANAVERAL, Fla. -- A media event was held on the grounds near the Press Site at NASA's Kennedy Space Center in Florida where a Multi-Purpose Crew Vehicle (MPCV) is on display. The MPCV is based on the Orion design requirements for trav…
KSC-2011-5113
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians on a scissor lift monitor the progress as a special handling device is used to move the second of three fairi…
KSC-2013-4472
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a crane lowers the spacecraft adapter cone for the Orion vehicle onto a work stand. T…
KSC-2013-3807
CAPE CANAVERAL, Fla. -- Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, the spacecraft adapter cone for the Orion spacecraft is positioned on special protective blocks for processing work. It…
KSC-2013-4110
CAPE CANAVERAL, Fla. -- The heat shield for the Orion spacecraft has been placed on a work stand inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida. The heat shield arrived at Kennedy’s Shuttle La…
KSC-2013-4351
CAPE CANAVERAL, Fla. -- The heat shield for the Orion spacecraft has been placed on a work stand inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida. The heat shield arrived at Kennedy’s Shuttle La…
KSC-2013-4354
CAPE CANAVERAL, Fla. -- Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as the service module bulkhead for the Orion spacecraft is lifted by crane from a work…
KSC-2013-4108
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, processing work continues on the service module bulkhead for the Orion spacecraft. Technicians have applied shims, drille…
KSC-2013-3809
CAPE CANAVERAL, Fla. -- A crane moves one of three main parachutes for the Orion spacecraft inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida. The parachute is being prepared for installation on…
KSC-2013-4364
CAPE CANAVERAL, Fla. -- Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians prepare the main parachute for the Orion spacecraft for lifting by crane. The parachute will be prepared for…
KSC-2013-4362
CAPE CANAVERAL, Fla. -- Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, the spacecraft adapter cone for the Orion spacecraft is positioned on special protective blocks for processing work. It…
KSC-2013-4109
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, the service module for the Orion spacecraft is secured to a work stand. Technicians are preparing the three fairings for…
KSC-2013-4526
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, technicians use a special handling device to move the first of three fairings closer for installation on the service modu…
KSC-2013-4469
CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a view from above shows the second of three fairings being installed on the service module for the Orion spacecraft.…
KSC-2013-4477