KENNEDY SPACE CENTER, FLA. --  STS-122 Mission Specialist Rex Walheim points at part of the Columbus Research Laboratory in the Space Station Processing Facility.  He and other crew members are at Kennedy to take part in a crew equipment in…
KSC-07pd2603
KENNEDY SPACE CENTER, FLA. -- STS-122 Mission Specialist Leland Melvin gets a close look at the Columbus Research Laboratory in the Space Station Processing Facility.  The crew is at Kennedy to take part in a crew equipment interface test,…
KSC-07pd2602
KENNEDY SPACE CENTER, FLA. --   STS-122 crew members get a close look at shuttle equipment from inside the payload bay of space shuttle Atlantis.  The crew comprises six astronauts: Commander Stephen Frick, Pilot Alan Poindexter and Mission…
KSC-07pd2658
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialists John "Danny" Olivas (top right) and Christer Fugelsang (bottom right) inspect ammonia tanks, part of the…
KSC-2009-3541
KENNEDY SPACE CENTER, FLA. --   STS-122 crew members take a ride inside space shuttle Atlantis' payload bay to examine components installed there.  Seen here are Mission Specialists Leland Melvin (center) and Rex Walheim (right).  The crew…
KSC-07pd2655
KENNEDY SPACE CENTER, FLA. -  In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-115  Mission Specialist Daniel Burbank is practicing folding a sequential shunt unit launch to activation multilayer installation bla…
KSC-06pd1181
KENNEDY SPACE CENTER, FLA. -- The STS-118 crew members look over parts of the mission payload, the S5 integrated truss, in the Space Station Processing Facility during crew equipment interface test activities.  Seen here are Mission Special…
KSC-07pd1113
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialist John "Danny" Olivas lies on a carrier while unbolting equipment, a task required for the mission. Members…
KSC-2009-3545
KENNEDY SPACE CENTER, FLA. --  The STS-118 crew members look over parts of the mission payload, the control moment gyroscope, at SPACEHAB during crew equipment interface test activities.  Seen here are Mission Specialist Barbara Morgan and…
KSC-07pd1120
KENNEDY SPACE CENTER, FLA. --  In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-123 crew get hands-on experience with some of the equipment related to the mission.  Crew members are Commander Domin…
KSC-07pd2840
KENNEDY SPACE CENTER, FLA. -- The STS-118 crew members look over parts of the mission payload, the S5 integrated truss, in the Space Station Processing Facility during crew equipment interface test activities.  Seen here is Mission Speciali…
KSC-07pd1117
KENNEDY SPACE CENTER, FLA. --    The STS-118 crew members look over parts of the mission payload, the control moment gyroscope, at SPACEHAB during crew equipment interface test activities.  Seen here are Mission Specialists Dr. Dafydd Willi…
KSC-07pd1123
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-123 crew members get a close look at hardware related to the mission.  They are at the center for a crew equipment interface test, wh…
KSC-07pd2833
KENNEDY SPACE CENTER, FLA. -   In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-115  Mission Specialists (foreground, from left) Daniel Burbank, Joseph Tanner, Heidemarie Stefanyshyn-Piper, and Steve Maclean are…
KSC-06pd1183
KENNEDY SPACE CENTER, FLA. --  In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-123 crew learn more about the mission payload, the Kibo Experiment Logistics Module Pressurized Section.  Crew member…
KSC-07pd2843
CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Space Station Processing Facility, STS-129 Mission Specialist Michael Foreman gets a close look at hardware installed on the Express Logistics Carrier, or ELC.  The crew is at Kennedy fo…
KSC-2009-5078
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialists John "Danny" Olivas (left) and Christer Fugelsang (far right) inspect ammonia tanks, part of the payload…
KSC-2009-3543
KENNEDY SPACE CENTER, FLA. -- Members of the STS-122 crew look over the Columbus Research Laboratory in the Space Station Processing Facility. The crew is at Kennedy to take part in a crew equipment interface test, which helps familiarize t…
KSC-07pd2600
KENNEDY SPACE CENTER, FLA. -- The STS-118 crew members look over parts of the mission payload, the S5 integrated truss, in the Space Station Processing Facility during crew equipment interface test activities.  Seen here is Mission Speciali…
KSC-07pd1111
KENNEDY SPACE CENTER, FLA. -    In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-115 Mission Specialist Joe Tanner is removing the P3 truss multiplexer-demultiplexer launch to activation multilayer installation b…
KSC-06pd1174
KENNEDY SPACE CENTER, FLA. --  In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-123 crew learn more about the mission payload, the Kibo Experiment Logistics Module Pressurized Section.  They are at…
KSC-07pd2826
KENNEDY SPACE CENTER, FLA. --  In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-123 crew get hands-on experience with the mission payload, the Kibo Experiment Logistics Module Pressurized Section.…
KSC-07pd2827
KENNEDY SPACE CENTER, FLA. --  In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-123 crew get hands-on experience with some of the equipment related to the mission.  Crew members are Commander Domin…
KSC-07pd2842
KENNEDY SPACE CENTER, FLA. -   KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-115  Mission Specialist Heidemarie Stefanyshyn-Piper is practicing folding a sequential shunt unit laun…
KSC-06pd1178
KENNEDY SPACE CENTER, FLA. -- STS-118 Commander Scott Kelly, seen here in the Space Station Processing Facility, is at KSC to take part in crew equipment interface test activities.  The crew comprises Kelly, Pilot Charles Hobaugh, and Missi…
KSC-07pd1119
KENNEDY SPACE CENTER, FLA. --   STS-122 crew members get a close look at shuttle equipment from inside the payload bay of space shuttle Atlantis.  The crew comprises six astronauts: Commander Stephen Frick, Pilot Alan Poindexter and Mission…
KSC-07pd2659
KENNEDY SPACE CENTER, FLA. --    The STS-118 crew members look over parts of the mission payload, the control moment gyroscope, at SPACEHAB during crew equipment interface test activities.  Seen here are Mission Specialists Dr. Dafydd Willi…
KSC-07pd1122
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-123 crew members get a close look at hardware related to the mission.  They are at the center for a crew equipment interface test, wh…
KSC-07pd2832
KENNEDY SPACE CENTER, FLA. -   In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-115  Mission Specialist Joseph Tanner is practicing folding a sequential shunt unit launch to activation multilayer installation bla…
KSC-06pd1179
KENNEDY SPACE CENTER, FLA. -- The STS-118 crew members look over parts of the mission payload, the S5 integrated truss, in the Space Station Processing Facility during crew equipment interface test activities.  Seen here is Mission Speciali…
KSC-07pd1112
CAPE CANAVERAL, Fla. – Members of the STS-129 crew spend time in NASA Kennedy Space Center's Space Station Processing Facility looking over the payloads installed on the Express Logistics Carrier, or ELC.  The crew is at Kennedy for a Crew…
KSC-2009-5074
KENNEDY SPACE CENTER, FLA. --   STS-122 crew members get a close look at shuttle equipment from inside the payload bay of space shuttle Atlantis.  The crew is at Kennedy Space Center to take part in a crew equipment interface test, which in…
KSC-07pd2657
KENNEDY SPACE CENTER, FLA. --  In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-123 crew get hands-on experience with some of the equipment related to the mission.  Crew members are Commander Domin…
KSC-07pd2844
KENNEDY SPACE CENTER, FLA. --  STS-122 Mission Specialist Stanley Love looks at the experiment racks inside the Columbus Research Laboratory in the Space Station Processing Facility.  He and other crew members are at Kennedy to take part in…
KSC-07pd2604
CAPE CANAVERAL, Fla. -- In NASA Kennedy Space Center's Space Station Processing Facility, STS-129 Mission Specialists Michael Foreman (left) and Randy Bresnik look over hardware installed on the Express Logistics Carrier, or ELC.  The crew…
KSC-2009-5079
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialists John "Danny" Olivas (second from left) and Christer Fugelsang (right) inspect ammonia tanks, part of the…
KSC-2009-3542
KENNEDY SPACE CENTER, FLA. -  While technicians and crew members observe him in the Space Station Processing Facility at NASA's Kennedy Space Center, STS-115  Mission Specialist Daniel Burbank (right) is practicing folding a sequential shun…
KSC-06pd1180
KENNEDY SPACE CENTER, FLA. -   KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-115  Mission Specialist Joseph Tanner is practicing folding a sequential shunt unit launch to activatio…
KSC-06pd1176
CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Space Station Processing Facility, STS-129 Mission Specialist Randy Bresnik becomes familiar with equipment installed on the Express Logistics Carrier, or ELC.  The crew is at Kennedy fo…
KSC-2009-5076
CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Space Station Processing Facility, STS-129 Mission Specialist Randy Bresnik practices using equipment associated with hardware installed on the Express Logistics Carrier, or ELC.  The cr…
KSC-2009-5077
KENNEDY SPACE CENTER, FLA. --  In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-123 crew get hands-on experience with some of the equipment related to the mission. Crew members are Commander Domini…
KSC-07pd2841
KENNEDY SPACE CENTER, FLA. -    In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-115 Mission Specialist Steve Maclean is installing a solar alpha rotary joint drive lock assembly multilayer installation cover.  H…
KSC-06pd1172
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-123 Mission Specialist Takao Doi (left) and Commander Dominic Gorie confer about the mission payload, the Kibo Experiment Logistics M…
KSC-07pd2829
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialist John "Danny" Olivas lies on a carrier while unbolting equipment, a task required for the mission.  Members…
KSC-2009-3546
CAPE CANAVERAL, Fla. -- In NASA Kennedy Space Center's Space Station Processing Facility, STS-129 Mission Specialist Randy Bresnik gets a close look at hardware installed on the Express Logistics Carrier, or ELC.  The crew is at Kennedy for…
KSC-2009-5080
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-123 crew members get a close look at hardware related to the mission.  They are at the center for a crew equipment interface test, wh…
KSC-07pd2831
KENNEDY SPACE CENTER, FLA. --The STS-118 crew members look over parts of the mission payload, the S5 integrated truss, in the Space Station Processing Facility during crew equipment interface test activities.  Seen here are Mission Speciali…
KSC-07pd1114
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a worker demonstrates an attachment point on ammonia tanks while STS-128 Mission Specialist John "Danny" Olivas (far right) looks on.…
KSC-2009-3544