KENNEDY SPACE CENTER, FLA. --  STS-122 Mission Specialist Rex Walheim points at part of the Columbus Research Laboratory in the Space Station Processing Facility.  He and other crew members are at Kennedy to take part in a crew equipment in…
KSC-07pd2603
KENNEDY SPACE CENTER, FLA. --   In the Space Station Processing Facility at NASA's Kennedy Space Center, astronaut Peggy Whitson (right) is familiarizing herself with the U.S. Laboratory Node 2, which is the payload for mission STS-120 targ…
KSC-07pd0171
KENNEDY SPACE CENTER, FLA. --  STS-122 Mission Specialist Stanley Love looks at the experiment racks inside the Columbus Research Laboratory in the Space Station Processing Facility.  He and other crew members are at Kennedy to take part in…
KSC-07pd2604
CAPE CANAVERAL, Fla. -- As the sun begins to rise over Launch Pad 39A at NASA's Kennedy Space Center in Florida, preparations to remove the ground umbilical carrier plate's (GUCP) 7-inch quick disconnect are under way. A hydrogen gas leak a…
KSC-2010-5606
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the tip-top of the bright-orange external fuel tank is where workers will prepare to begin removing the quick disconnect from the ground umbilical carrier…
KSC-2010-5562
CAPE CANAVERAL, Fla. -- Inside the Space Life Sciences Laboratory near NASA’s Kennedy Space Center in Florida, Dr. David J. Smith, a microbiologist in the Surface Systems Office, prepares microbes that will be deployed for the Microorganism…
KSC-2013-2768
ARMY CONTRACTOR HONGROK CHANG IN THE FAST LIGHT OPTICAL GYROSCOPE LAB
1201051
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, technicians prepare to move the STS-133 payload from the rotating service structure on Launch Pad 39A to space shuttle Discovery's payload bay. The move paves the way for th…
KSC-2010-5042
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the vent line is detached from the ground umbilical carrier plate (GUCP) on the bright-orange external fuel tank.  Next, the GUCP's 7-inch quick disconnect…
KSC-2010-5598
CAPE CANAVERAL, Fla. -- – Inside a laboratory in the Engineering Development Laboratory, or EDL, at NASA’s Kennedy Space Center in Florida, research scientist Michael Johansen, in the blue polo shirt, describes dust mitigation technology to…
KSC-2012-6217
CVN78 CARRIER AIRFLOW STUDY IN FLUID MECHANICS LAB (CVN21)
ARC-2004-ACD04-0002-022
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a dexterous humanoid astronaut helper, known as Robonaut, demonstrates its talents to media. Robonaut 2 (R2) will be delivered to the International Space Station on space sh…
KSC-2010-5425
CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, Robert Lightfoot, NASA associate director, second from left, learns about smart coatings technology in the Corrosion Lab during a tour of the Swamp Works laboratories.   Kenn…
KSC-2013-2568
CVN78 CARRIER AIRFLOW STUDY IN FLUID MECHANICS LAB (CVN21)
ARC-2004-ACD04-0002-002
CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, Robert Lightfoot, NASA associate director, partially hidden in the center, learns about Integrated Ground Operations Demonstration Units, or IGODU, technology during a tour o…
KSC-2013-2572
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the tip-top of the bright-orange external fuel tank is where workers will prepare to begin removing the quick disconnect from the ground umbilical carrier…
KSC-2010-5560
KENNEDY SPACE CENTER, FLA. -- Members of the STS-122 crew look over the Columbus Research Laboratory in the Space Station Processing Facility. The crew is at Kennedy to take part in a crew equipment interface test, which helps familiarize t…
KSC-07pd2600
KENNEDY SPACE CENTER, FLA. --    With help from a technician (right) in the Space Station Processing Facility at NASA's Kennedy Space Center, astronaut Peggy Whitson (left) is familiarizing herself with the U.S. Laboratory Node 2, which is…
KSC-07pd0172
KENNEDY SPACE CENTER, FLA. -- STS-122 Mission Specialist Leland Melvin gets a close look at the Columbus Research Laboratory in the Space Station Processing Facility.  The crew is at Kennedy to take part in a crew equipment interface test,…
KSC-07pd2602
Jared Sass, NASA engineer, monitors a test inside the Cryogenics Test Laboratory at NASA’s Kennedy Space Center in Florida on Oct. 21, 2020. Established in 2000, the Cryogenics Test Laboratory provides a one-of-a kind capability for researc…
Engineering Labs - Cryogenics Test Laboratory (CTL)
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, a worker prepares to remove the ground umbilical carrier plate's (GUCP) 7-inch quick disconnect. A hydrogen gas leak at that location on the external fuel…
KSC-2010-5609
CVN78 CARRIER AIRFLOW STUDY IN FLUID MECHANICS LAB (CVN21)
ARC-2004-ACD04-0002-023
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, workers prepare to remove the ground umbilical carrier plate's (GUCP) 7-inch quick disconnect. A hydrogen gas leak at that location on the external fuel ta…
KSC-2010-5608
CAPE CANAVERAL, Fla. – Researchers at NASA’s Kennedy Space Center in Florida check readings on the Dust Atmospheric Recovery Technology, or DART, spacecraft inside a laboratory at the Space Life Sciences Lab. DART will characterize the dust…
KSC-2014-4903
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the tip-top of the bright-orange external fuel tank is where workers will prepare to begin removing the quick disconnect from the ground umbilical carrier…
KSC-2010-5559
CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, Robert Lightfoot, NASA associate director, at left, learns about the Regolith and Environment Science and Oxygen and Lunar Volatile Extraction, or RESOLVE, rover during a tou…
KSC-2013-2569
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, workers prepare to begin removing the quick disconnect from the ground umbilical carrier plate (GUCP) on space shuttle Discovery's external fuel tank. A hy…
KSC-2010-5565
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, workers take photos of the ground umbilical carrier plate's (GUCP) 7-inch quick disconnect, which has been removed from the external fuel tank. A hydrogen…
KSC-2010-5616
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a left-side main separation bolt attaches the bottom of space shuttle Discovery to its external fuel tank in the Vehicle Assembly Building. As technicians were attaching the…
KSC-2010-4648
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, technicians prepare to move the STS-133 payload from the rotating service structure on Launch Pad 39A to space shuttle Discovery's payload bay. The move paves the way for th…
KSC-2010-5043
CAPE CANAVERAL, Fla. -- Inside the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the hatch of the Permanent Multipurpose Module (PMM) is closed in preparation for space shuttle Discovery's STS-133 mission to t…
KSC-2010-4781
CAPE CANAVERAL, Fla. – A researcher at NASA’s Kennedy Space Center in Florida checks a reading on the Dust Atmospheric Recovery Technology, or DART, spacecraft inside a laboratory at the Space Life Sciences Lab. DART will characterize the d…
KSC-2014-4901
Airspace Operations Lab (AOL); on route air traffic control room
ARC-2009-ACD09-0097-5
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew checks out the heat shield tiles that protect space shuttles during re-entry. From left, are Mission Specialists Greg C…
KSC-2010-5539
KENNEDY SPACE CENTER, FLA. --   In the Space Station Processing Facility at NASA's Kennedy Space Center, astronaut Peggy Whitson (right) is familiarizing herself with the U.S. Laboratory Node 2, which is the payload for mission STS-120 targ…
KSC-07pd0170
KENNEDY SPACE CENTER, FLA. --   In the Space Station Processing Facility at NASA's Kennedy Space Center, astronaut Peggy Whitson (center) is familiarizing herself with the U.S. Laboratory Node 2, which is the payload for mission STS-120 tar…
KSC-07pd0173
Jared Sass, NASA engineer, monitors a test inside the Cryogenics Test Laboratory at NASA’s Kennedy Space Center in Florida on Oct. 21, 2020. Established in 2000, the Cryogenics Test Laboratory provides a one-of-a kind capability for researc…
Engineering Labs - Cryogenics Test Laboratory (CTL)
Adam Swanger, NASA engineer, is inside the Cryogenics Test Laboratory at NASA’s Kennedy Space Center in Florida on Oct. 21, 2020. Established in 2000, the Cryogenics Test Laboratory provides a one-of-a kind capability for research, developm…
Engineering Labs - Cryogenics Test Laboratory (CTL)
CAPE CANAVERAL, Fla. -- During a visit to NASA's Kennedy Space Center in Florida, NASA Chief Technologist David Miller, center, tours laboratories inside the Swamp Works facility. At right, Dr. Gioia Massa, NASA project scientist in the Eng…
KSC-2015-1028
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the tip-top of the bright-orange external fuel tank is where workers will prepare to begin removing the quick disconnect from the ground umbilical carrier…
KSC-2010-5564
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Commander Mark Kelly, left, and Mission Specialist Roberto Vittori with the European Space Agency check out a tool they'll be us…
KSC-2010-5544
CAPE CANAVERAL, Fla. -- Inside the Space Life Sciences Laboratory near NASA’s Kennedy Space Center in Florida, the Mars Simulation Chamber is being prepared for the Microorganisms in the Stratosphere, or MIST, mission support. The chamber a…
KSC-2013-2764
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, workers begin to remove the vent line attached to the ground umbilical carrier plate (GUCP) on the bright-orange external fuel tank. Next, the GUCP's 7-inc…
KSC-2010-5594
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, a worker examines the foam insulation on space shuttle Discovery's external fuel tank. Two cracks on a section of the tank’s metal exterior were found on o…
KSC-2010-5618
CAPE CANAVERAL, Fla. -- Inside the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the hatch of the Permanent Multipurpose Module (PMM) is closed in preparation for space shuttle Discovery's STS-133 mission to t…
KSC-2010-4784
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Mission Specialist Roberto Vittori with the European Space Agency, left, Commander Mark Kelly and Pilot Gregory H. Johnson check…
KSC-2010-5551
CAPE CANAVERAL, Fla. -- Inside the Space Life Sciences Laboratory near NASA’s Kennedy Space Center in Florida, Dr. David J. Smith, a microbiologist in the Surface Systems Office, prepares microbes that will be deployed for the Microorganism…
KSC-2013-2767
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a Vehicle Assembly Building technician adjusts a left-side main separation bolt that attaches the bottom of space shuttle Discovery to its external fuel tank. As technicians…
KSC-2010-4647