
CAPE CANAVERAL, Fla. -- The Press Site auditorium at NASA's Kennedy Space Center in Florida hosted an International Space Station Science and Technology news conference. Seen here are NASA Public Affairs Officer Make Curie, moderator (left)…

International Space Station program manager Kirk Shireman addresses station hardware and science teams at NASA's Marshall Space Flight Center.

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians place equipment in the Resupply Stowage Platform, or RSP, to be installed in the multi-purpose logistics module Leonardo.…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians watch as the rack insertion device maneuvers the Resupply Stowage Platform, or RSP, into the multi-purpose logistics mod…

This photo shows the interior reach in the Microgravity Science Glovebox (MSG) being developed by the European Space Agency (ESA) and NASA for use aboard the International Space Station (ISS). Scientists will use the MSG to carry out multid…

Expedition 6 astronaut Dr. Don Pettit photographed a cube shaped wire frame supporting a thin film made from a water-soap solution during his Saturday Morning Science aboard the International Space Station’s (ISS) Destiny Laboratory. Food c…

This photo shows a rubber glove and its attachment ring for the Microgravity Science Glovebox (MSG) being developed by the European Space Agency (ESA) and NASA for use aboard the International Space Station (ISS). Scientists will use the MS…

Interior lights give the Microgravity Science Glovebox (MSG) the appearance of a high-tech juke box. The European Space Agency (ESA) and NASA are developing the MSG for use aboard the International Space Station (ISS). Scientists will use t…

Access ports, one on each side of the Microgravity Science Glovebox (MSG), will allow scientists to place large experiment items inside the MSG. The ports also provide additional glove ports (dark circle) for greater access to the interior.…

This photo shows one of three arrays of air filters inside the Microgravity Science Glovebox (MSG) being developed by the European Space Agency (ESA) and NASA for use aboard the International Space Station (ISS). Scientists will use the MSG…

Earth observation taken during a night pass by the Expedition 43 crew aboard the International Space Station (ISS).

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, astronaut Garrett Reisman (right) gets hands-on experience with a piece of hardware to be flown on an upcoming shuttle flight. Next to him is a technician. With con…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane moves the S3/S4 integrated truss to a payload canister. After it is stowed in the canister, the S3/S4 truss will be transported to the launch pad.…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, astronauts Garrett Reisman, Peggy Whitson and Leopold Eyharts look at one of the modules being processed there. The hardware will be flown on an upcoming shuttle fligh…

ISS029-E-008433 (17 Sept. 2011) --- This is one of a series of night time images photographed by one of the Expedition 29 crew members from the International Space Station. It features Aurora Australis, seen from a point over the southeast…

KENNEDY SPACE CENTER, FLA. -- From the floor of the Space Station Processing Facility, astronauts get a look at the S6 integrated truss and solar arrays, scheduled to fly on STS-119 in 2008. In the center are Peggy Whitson and Dan Tani. W…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the rack insertion device moves the Resupply Stowage Platform, or RSP, toward the opening in the multi-purpose logistics module Leona…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the Resupply Stowage Platform, or RSP, is ready for installation in the multi-purpose logistics module Leonardo. The module is part o…

CAPE CANAVERAL, Fla. – The multi-purpose logistics module Leonardo is seen in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. A Resupply Stowage Platform, or RSP, containing equipment was just installed ins…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the rack insertion device lifts the Resupply Stowage Platform, or RSP, for installation in the multi-purpose logistics module Leonard…

Interior lights give the Microgravity Science Glovebox (MSG) the appearance of a high-tech juke box. The European Space Agency (ESA) and NASA are developing the MSG for use aboard the International Space Station (ISS). Scientists will use t…

Interior lights give the Microgravity Science Glovebox (MSG) the appearance of a high-tech juke box. The European Space Agency (ESA) and NASA are developing the MSG for use aboard the International Space Station (ISS). Scientists will use t…

Interior lights give the Microgravity Science Glovebox (MSG) the appearance of a high-tech juke box. The European Space Agency (ESA) and NASA are developing the MSG for use aboard the International Space Station (ISS). Scientists will use t…

This photo shows the access through the internal airlock (bottom right) on the Microgravity Science Glovebox (MSG) being developed by the European Space Agency (ESA) and NASA for use aboard the International Space Station (ISS). Scientists…

Once the Microgravity Science Glovebox (MSG) is sealed, additional experiment items can be inserted through a small airlock at the bottom right of the work volume. It is shown here with the door open. The European Space Agency (ESA) and NAS…

An array of miniature lamps will provide illumination to help scientists as they conduct experiments inside the Microgravity Science Glovebox (MSG). The European Space Agency (ESA) and NASA are developing the MSG for use aboard the Internat…

The 7-year journey to Saturn began with the liftoff of a Titan IVB/ Centaur carrying the Cassini orbiter and its attached Huygens probe. After a 2.2-billion mile journey that included two swingbys of Venus and one of the Earth to gain addit…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane lifts the S3/S4 integrated truss from its workstand in order to move it to the payload canister. After it is stowed in the canister, the S3/S4 truss…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane moves the S3/S4 integrated truss toward the open doors of the payload canister. After it is stowed in the canister, the S3/S4 truss will be transp…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane settles the S3/S4 integrated truss into the payload canister. After it is stowed in the canister, the S3/S4 truss will be transported to the launch…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, workers attach an overhead crane to the S3/S4 integrated truss in order to move it to the payload canister. After it is stowed in the canister, the S3/S4 truss will be…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the rack insertion device lifts the Resupply Stowage Platform, or RSP, for installation in the multi-purpose logistics module Leonard…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians maneuver the Resupply Stowage Platform, or RSP, toward the rack insertion device. The device will help install the RSP…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the Resupply Stowage Platform, or RSP, is moved into the multi-purpose logistics module Leonardo. The module is part of the payload…

(February 19, 2025) -- NASA astronaut Don Pettit demonstrates electrostatic forces using charged water droplets and a knitting needle made of Teflon. This series of overlapping frames displays the unique attraction-repulsion properties of T…

In the Destiny laboratory aboard the International Space Station (ISS), European Space Agency (ESA) astronaut Pedro Duque of Spain is seen working at the Microgravity Science Glovebox (MSG). He is working with the PROMISS experiment, which…

The Microgravity Science Glovebox (MSG) is being developed by the European Space Agency (ESA) and NASA for use aboard the International Space Station (ISS). Scientists will use the MSG to carry out multidisciplinary studies in combustion sc…

Interior lights give the Microgravity Science Glovebox (MSG) the appearance of a high-tech juke box. The European Space Agency (ESA) and NASA are developing the MSG for use aboard the International Space Station (ISS). Scientists will use t…

Access ports, one on each side of the Microgravity Science Glovebox (MSG), will allow scientists to place large experiment items inside the MSG. The ports also provide additional glove ports (silver disk) for greater access to the interior.…

Expedition 6 astronaut Dr. Don Pettit photographed a cube shaped wire frame supporting a thin film made from a water-soap solution during his Saturday Morning Science aboard the International Space Station’s (ISS) Destiny Laboratory. Food c…

This photo shows the access through the internal airlock (bottom right) on the Microgravity Science Glovebox (MSG) being developed by the European Space Agency (ESA) and NASA for use aboard the International Space Station (ISS). The airlock…

This photo shows the access through the internal airlock on the Microgravity Science Glovebox (MSG) being developed by the European Space Agency (ESA) and NASA for use aboard the International Space Station (ISS). The airlock will allow the…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, astronauts get data on the space station module they are in. At left is Leopold Eyharts; at right is Dan Tani and Peggy Whitson. With construction of the Space Sta…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, (left to right) astronauts Dan Tani, Leopold Eyharts, Koichi Wakata and Peggy Whitson study hardware for an upcoming shuttle flight. With construction of the Space Sta…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, astronauts familiarize themselves with hardware and modules to be flown on upcoming shuttle flights. Seen here are Leopold Eyharts and Peggy Whitson. With constructi…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane lowers the S3/S4 integrated truss toward the open doors of the payload canister. After it is stowed in the canister, the S3/S4 truss will be transp…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, an overhead crane lowers the S3/S4 integrated truss into the open bay of the payload canister. After it is stowed in the canister, the S3/S4 truss will be transporte…
