CAPE CANAVERAL, Fla. – The swing structure in Orbiter Processing Facility-1 begins to move from around the aft of space shuttle Atlantis so the orbital maneuvering system pod can be placed on the shuttle. The shuttle is being prepared for p…
KSC-2012-3281
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a special payload removal device is used to transfer the Raffaello multi-purpose logistics modul…
KSC-2011-6152
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, this image shows in detail a view of the hydraulic system connected to the underside of shuttle Atlantis that will lift the vehicle off the f…
KSC-2011-2968
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, United Space Alliance technicians install a mock air lock in the payload bay of the space shuttle Atlantis in Bay 2 of the Orbiter Processing Facility. Atlantis is undergoing…
KSC-2012-4826
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, a mock air lock has been installed in the payload bay of the space shuttle Atlantis. The orbiter is undergoing final preparations…
KSC-2012-5044
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, a special payload removal device is used to lift the Raffaello multi-purpose logistics module away from Atlantis’ cargo bay.  Raffae…
KSC-2011-6150
– CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, a mock air lock has been installed in the payload bay of the space shuttle Atlantis in Bay 2 of the Orbiter Processing Facility. Atlantis is undergoing final preparations f…
KSC-2012-4828
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, United Space Alliance technicians monitor operations as a crane is used to lift a mock air lock being prepared for installation in the payload bay of the space shuttle Atlant…
KSC-2012-4821
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance technicians remove the two external fuel tank doors from the space shuttle Atlantis. The orbiter is undergoi…
KSC-2012-5037
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, Atlantis’ cargo bay is empty after a special payload removal device was used to remove the Raffaello multi-purpose logistics module…
KSC-2011-6157
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance technicians remove the two external fuel tank doors from the space shuttle Atlantis. Atlantis is undergoing…
KSC-2012-4940
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance technicians remove the two external fuel tank doors from the space shuttle Atlantis. Atlantis is undergoing…
KSC-2012-4941
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, a special payload removal device is used to lift the Raffaello multi-purpose logistics module away from Atlantis’ cargo bay. Raffael…
KSC-2011-6151
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, a crane is used to lift a mock air lock being prepared for installation in the payload bay of the space shuttle Atlantis in Bay 2 of the Orbiter Processing Facility. Atlantis…
KSC-2012-4819
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, a United Space Alliance technician installs a thermal protection system carrier panel on the space shuttle Atlantis in Bay 2 of the Orbiter Processing Facility. Atlantis is u…
KSC-2012-4814
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance technicians install an Orbital Maneuvering System engine nozzle on the space shuttle Atlantis. The orbiter i…
KSC-2012-5034
CAPE CANAVERAL, Fla. – The swing structure in Orbiter Processing Facility-1 moves from around the aft of space shuttle Atlantis so the orbital maneuvering system pod can be placed on the shuttle. The shuttle is being prepared for public dis…
KSC-2012-3283
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, a mock air lock is prepared for installation in the payload bay of the space shuttle Atlantis in Bay 2 of the Orbiter Processing Facility. Atlantis is undergoing final prepar…
KSC-2012-4815
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, two external fuel tank doors were removed from the space shuttle Atlantis. The orbiter is undergoing final preparations for its tr…
KSC-2012-5039
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, doors begin to close around the Raffaello multi-purpose logistics module after it was secured in the payload canister. A special pay…
KSC-2011-6155
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, shuttle Atlantis' systems are being "powered-up," or tested in preparation of its move to the Vehicle Assembly Building where it will be join…
KSC-2011-2974
CAPE CANAVERAL, Fla. - Inside Orbiter Processing Facility-1 at Kennedy Space Center in Florida, shuttle Atlantis’ hatch closure is in the open position in preparation for the Mylar Pull Test. During the test, the hatch is closed and a scale…
KSC-2010-2204
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, United Space Alliance technicians install a mock air lock in the payload bay of the space shuttle Atlantis in Bay 2 of the Orbiter Processing Facility. Atlantis is undergoing…
KSC-2012-4827
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, workers install and test the hydraulic system that will lift the shuttle Atlantis off the floor to enable the orbiter transport system, or OT…
KSC-2011-2967
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, a worker tests the hydraulic system that will lift the shuttle Atlantis off the floor to enable the orbiter transport system, or OTS, to be r…
KSC-2011-2970
CAPE CANAVERAL, Fla. - Inside Orbiter Processing Facility-1 at Kennedy Space Center in Florida, a technician dressed in a clean room suit, prepares to install a camera in the forward mid-body of shuttle Atlantis. Atlantis is being processed…
KSC-2010-2202
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, an Orbital Maneuvering System engine nozzle has just been installed on the space shuttle Atlantis. The orbiter is undergoing final…
KSC-2012-5035
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a special payload removal device lifts the Raffaello multi-purpose logistics module from Atlanti…
KSC-2011-6147
CAPE CANAVERAL, Fla. - Inside Orbiter Processing Facility-1 at Kennedy Space Center in Florida, technicians close shuttle Atlantis’ hatch in preparation for the Mylar Pull Test. During the test, the hatch is closed and a scale is used to me…
KSC-2010-2205
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance technicians remove the two external fuel tank doors from the space shuttle Atlantis. The orbiter is undergoi…
KSC-2012-5036
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, workers test the hydraulic system that will lift the shuttle Atlantis off the floor to enable the orbiter transport system, or OTS, to be rol…
KSC-2011-2969
CAPE CANAVERAL, Fla. – The swing structure in Orbiter Processing Facility-1 moves from around the aft of space shuttle Atlantis so the orbital maneuvering system pod can be placed on the shuttle. The shuttle is being prepared for public dis…
KSC-2012-3284
CAPE CANAVERAL, Fla. – The swing structure in Orbiter Processing Facility-1 begins to move from around the aft of space shuttle Atlantis so the orbital maneuvering system pod can be placed on the shuttle. The shuttle is being prepared for p…
KSC-2012-3280
CAPE CANAVERAL, Fla. – The swing structure in Orbiter Processing Facility-1 begins to move from around the aft of space shuttle Atlantis so the orbital maneuvering system pod can be placed on the shuttle. The shuttle is being prepared for p…
KSC-2012-3282
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, United Space Alliance technicians prepare a mock air lock for installation in the payload bay of the space shuttle Atlantis in Bay 2 of the Orbiter Processing Facility. Atlan…
KSC-2012-4816
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance technicians install an Orbital Maneuvering System engine nozzle on the space shuttle Atlantis. The orbiter i…
KSC-2012-5033
CAPE CANAVERAL, Fla. - Inside Orbiter Processing Facility-1 at Kennedy Space Center in Florida, a technician secures shuttle Atlantis’ hatch in preparation for the Mylar Pull Test. During the test, a scale is used to measure the force requi…
KSC-2010-2206
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, a crane is used to lift a mock air lock being prepared for installation in the payload bay of the space shuttle Atlantis in Bay 2 of the Orbiter Processing Facility. Atlantis…
KSC-2012-4818
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, the payload canister doors are completely closed around the Raffaello multi-purpose logistics module after a special payload removal…
KSC-2011-6156
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a special payload removal device lifts the Raffaello multi-purpose logistics module high above A…
KSC-2011-6148
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance technicians remove the two external fuel tank doors from the space shuttle Atlantis. The orbiter is undergoi…
KSC-2012-5038
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, a mock air lock, seen in this overhead view, has been installed in the payload bay of the space shuttle Atlantis. The orbiter is u…
KSC-2012-5045
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, a United Space Alliance technician installs a main engine carrier panel on the space shuttle Atlantis in Bay 2 of the Orbiter Processing Facility. Atlantis is undergoing fina…
KSC-2012-4938
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, a worker checks the hydraulic system that has lifted shuttle Atlantis off the floor to enable the orbiter transport system, or OTS, to be rol…
KSC-2011-2971
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, the space shuttle Atlantis' payload bay is being configured for display at the Kennedy Space Center Visitor Complex. Plans call fo…
KSC-2012-5040
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a special payload removal device begins to lift the Raffaello multi-purpose logistics module fro…
KSC-2011-6144
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, technicians help position a special payload removal device above Atlantis’ cargo bay in preparation to remove the Raffaello multi-pu…
KSC-2011-6143
CAPE CANAVERAL, Fla. – In Bay 2 of the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance technicians prepare to install a television camera in the payload bay of the space shuttle Atlantis. The orb…
KSC-2012-5041