Team members monitor progress as the GOES-R spacecraft is lifted from horizontal to vertical inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satellite in a s…
GOES-R Uncrating and Move to Vertical
Team members monitor progress as the GOES-R spacecraft is raised to vertical inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satellite in a series of next-ge…
GOES-R Uncrating and Move to Vertical
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare Radiation Belt Storm Probes, or RBSP, spacecraft A for a spin test. During the spin test, the spacecraf…
KSC-2012-3536
At Astrotech Space Operations, workers look over the integrated THEMIS spacecraft before spin-balance testing. THEMIS consists of five identical probes, the largest number of scientific satellites ever launched into orbit aboard a single ro…
Moving THEMIS to a spin table for testing at Astrotech
Team members monitor progress as an overhead crane lowers the GOES-R spacecraft into its work stand inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satellite…
GOES-R Lift to Stand
The GOES-R spacecraft stands vertically inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satellite in a series of next-generation NOAA Geostationary Operation…
GOES-R Uncrating and Move to Vertical
At Astrotech Space Operations, the integrated THEMIS spacecraft is ready for spin-balance testing. THEMIS consists of five identical probes, the largest number of scientific satellites ever launched into orbit aboard a single rocket. This u…
Moving THEMIS to a spin table for testing at Astrotech
CAPE CANAVERAL, Fla. – In the clean room high bay at the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare to clean and inspect Radiation Belt Storm Probes A and B.    The Radiation Belt…
KSC-2012-3125
The shipping container is lifted off the GOES-R spacecraft inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satellite in a series of next-generation NOAA Geos…
GOES-R Uncrating and Move to Vertical
CAPE CANAVERAL, Fla. – Most of the protective covering has been removed from the lower stack, mini-stack number 1, two of the observatories for NASA's Magnetospheric Multiscale Observatory, or MMS, inside Building 1 D high bay at the Astrot…
KSC-2014-4363
CAPE CANAVERAL, Fla. – A technician carefully removes the protective covering from the lower stack, mini-stack number 1, two of the observatories for NASA's Magnetospheric Multiscale Observatory, or MMS, in Building 1 D high bay at the Astr…
KSC-2014-4361
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare Radiation Belt Storm Probes, or RBSP, spacecraft A for a spin test. During the spin test, the spacecraf…
KSC-2012-3526
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare Radiation Belt Storm Probes, or RBSP, spacecraft A for a spin test. During the spin test, the spacecraf…
KSC-2012-3528
The GOES-R spacecraft is revealed following its uncrating inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satellite in a series of next-generation NOAA Geost…
GOES-R Uncrating and Move to Vertical
Equipment is set up for the processing of NOAA's Joint Polar Satellite System-1, or JPSS-1, inside the Astrotech Processing Facility at Vandenberg Air Force Base in California. The spacecraft is being prepared for its upcoming liftoff aboar…
Delta II JPSS-1 Final Fueling Configuration
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians lower Radiation Belt Storm Probes, or RBSP, spacecraft A onto a spin test stand. During the spin test, the spac…
KSC-2012-3540
CAPE CANAVERAL, Fla. – NASA's Radiation Belt Storm Probes A and B are secured to work stands in the Astrotech payload processing facility, where technicians work to clean and inspect the two spacecraft.    The Radiation Belt Storm Probes, o…
KSC-2012-3129
CAPE CANAVERAL, Fla. – Technicians remove the protective covering from the lower stack, mini-stack number 1, two of the observatories for NASA's Magnetospheric Multiscale Observatory, or MMS, in Building 1 D high bay at the Astrotech payloa…
KSC-2014-4360
CAPE CANAVERAL, Fla. – Most of the protective covering has been removed from the lower stack, mini-stack number 1, two of the observatories for NASA's Magnetospheric Multiscale Observatory, or MMS, inside Building 1 D high bay at the Astrot…
KSC-2014-4364
CAPE CANAVERAL, Fla. - An Orion test capsule sits inside a temporary clean room in High Bay 3 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida during testing. The clean room, built by Astrotech, uses air flow produ…
KSC-2012-2880
CAPE CANAVERAL, Fla. – Technicians remove the protective covering from the lower stack, mini-stack number 1, two of the observatories for NASA's Magnetospheric Multiscale Observatory, or MMS, in Building 1 D high bay at the Astrotech payloa…
KSC-2014-4359
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare Radiation Belt Storm Probes, or RBSP, spacecraft A for a spin test. During the spin test, the spacecraf…
KSC-2012-3532
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare the test stand for Radiation Belt Storm Probes, or RBSP, spacecraft A for a spin test. During the spin…
KSC-2012-3533
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare Radiation Belt Storm Probes, or RBSP, spacecraft A for a spin test. During the spin test, the spacecraf…
KSC-2012-3529
Team members monitor progress as an overhead crane lowers the GOES-R spacecraft toward its work stand inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satelli…
GOES-R Lift to Stand
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare to place Radiation Belt Storm Probes, or RBSP, spacecraft A on a spin test stand. During the spin test,…
KSC-2012-3538
An overhead crane lifts the GOES-R spacecraft to move it into its work stand inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satellite in a series of next-ge…
GOES-R Lift to Stand
CAPE CANAVERAL, Fla. – Using a black light, a technician closely inspects one of NASA's twin Radiation Belt Storm Probes inside the clean room high bay at Astrotech payload processing facility. Black light inspection uses UVA fluorescence t…
KSC-2012-3135
CAPE CANAVERAL, Fla. - An Orion test capsule sits inside a temporary clean room in High Bay 3 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida during testing. The clean room, built by Astrotech, uses air flow produ…
KSC-2012-2879
CAPE CANAVERAL, Fla. – Technicians prepare to remove the protective covering from the lower stack, mini-stack number 1, two of the observatories for NASA's Magnetospheric Multiscale Observatory, or MMS, in Building 1 D high bay at the Astro…
KSC-2014-4355
In the Hazardous Processing Facility at Astrotech Space Operations, workers get ready to move the integrated THEMIS spacecraft to the spin table in the foreground. There it will undergo spin-balance testing. THEMIS consists of five identica…
Moving THEMIS to a spin table for testing at Astrotech
CAPE CANAVERAL, Fla. – Technicians begin to remove the protective covering from the lower stack, mini-stack number 1, two of the observatories for NASA's Magnetospheric Multiscale Observatory, or MMS, in Building 1 D high bay at the Astrote…
KSC-2014-4357
The shipping container is lifted off the GOES-R spacecraft inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satellite in a series of next-generation NOAA Geos…
GOES-R Uncrating and Move to Vertical
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare Radiation Belt Storm Probes, or RBSP, spacecraft A for a spin test. During the spin test, the spacecraf…
KSC-2012-3530
KENNEDY SPACE CENTER, FLA. - Jim Adams (right), deputy project manager for NASA's Solar Terrestrial Relations Observatory (STEREO), Goddard Space Flight Center, presents a certificate of appreciation to Dwayne Light, director of Florida Ope…
KSC-06pd0782
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare to place Radiation Belt Storm Probes, or RBSP, spacecraft A on a spin test stand. During the spin test,…
KSC-2012-3537
CAPE CANAVERAL, Fla. - An Orion test capsule sits inside a temporary clean room in High Bay 3 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida during testing. The clean room, built by Astrotech, uses air flow produ…
KSC-2012-2881
CAPE CANAVERAL, Fla. – Using flashlights, technicians closely inspect one of NASA's twin Radiation Belt Storm Probes in the Astrotech payload processing facility near Kennedy Space Center in Florida.    The Radiation Belt Storm Probes, or R…
KSC-2012-3128
CAPE CANAVERAL, Fla. - An Orion test capsule sits inside a temporary clean room in High Bay 3 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida during testing. The clean room, built by Astrotech, uses air flow produ…
KSC-2012-2878
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians monitor the progress as the Radiation Belt Storm Probes, or RBSP, spacecraft A undergoes a spin test. During th…
KSC-2012-3545
At Astrotech Space Operations, workers prepare the integrated THEMIS spacecraft for spin-balance testing. THEMIS consists of five identical probes, the largest number of scientific satellites ever launched into orbit aboard a single rocket.…
Moving THEMIS to a spin table for testing at Astrotech
An overhead crane moves the GOES-R spacecraft toward its work stand inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satellite in a series of next-generation…
GOES-R Lift to Stand
In the Hazardous Processing Facility at Astrotech Space Operations, a worker checks data on the integrated THEMIS spacecraft sitting on the spin table. THEMIS consists of five identical probes, the largest number of scientific satellites ev…
Moving THEMIS to a spin table for testing at Astrotech
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, technicians prepare Radiation Belt Storm Probes, or RBSP, spacecraft A for a spin test. During the spin test, the spacecraf…
KSC-2012-3531
NOAA's Joint Polar Satellite System-1, or JPSS-1, remains wrapped in a protective covering after removal from its shipping container at the Astrotech Processing Facility at Vandenberg Air Force Base in California. The spacecraft is being pr…
Delta II JPSS-1 Final Fueling Configuration
CAPE CANAVERAL, Fla. – Technicians have removed most of the protective covering from the lower stack, mini-stack number 1, two of the observatories for NASA's Magnetospheric Multiscale Observatory, or MMS, in Building 1 D high bay at the As…
KSC-2014-4362
CAPE CANAVERAL, Fla. - Inside the Astrotech payload processing facility near NASA’s Kennedy Space Center in Florida, the Radiation Belt Storm Probes, or RBSP, spacecraft A is undergoing a spin test. During the spin test, the spacecraft is t…
KSC-2012-3542
The GOES-R spacecraft is secured on its work stand inside the Astrotech payload processing facility in Titusville, Florida near NASA’s Kennedy Space Center. GOES-R will be the first satellite in a series of next-generation NOAA Geostationar…
GOES-R Lift to Stand