Artist concept of the X-59 three forths view
X59_threeForthsFront_LGD
Artist concept of the X-59 top view
X59_T
Artist illustration of the X-59 in flight above land and clouds.
Flying-002-Aug-update
Artist concept of the X-59 side view (left side)
X59_L
This image shows a close up of the cockpit view of the eXternal Vision System that will be placed in the X-59. Instead of a front facing window, the pilot will use these monitors for forward facing visibility.  Lockheed Martin Photography B…
X-59 SIL Round 2
Artist illustration of the X-59 taking off from the runway.
Takeoff_001_LM_Aug_update.jpg
Artist concept of the X-59 configuration views.
X59_Bot
Artist concept of the X-59 front view.
X59_F_LGD
Artist concept of the X-59 view of the back of the vehicle with the landing gears down.
X59_B_LGD
Artist concept of the X-59 front view.
X59_F
AirVenture at Oshkosh 2023
AirVenture at Oshkosh 2023
Artist illustration of the X-59 in flight in blue skies and white clouds.
x59_mark_placement_white-clouds-AUG
Artist concept of the X-59 three forths view top
X59_threeForths
NASA’s 2017 astronaut candidates toured aircraft hangar at Armstrong Flight Research Center, in Southern California. On the right, NASA’s, X-59 pilot Nils Larsen, briefs the astronauts as they look at Armstrong’s fleet of supersonic researc…
Pilot Nils Larsen Speaks to Astronauts on X-59 Research Using Jets
The X-59 is transported to the fuel barn at Lockheed Martin in Fort Worth, Texas to undergo fuel tank calibration tests. During this phase, the X-59’s gas tanks were filled and fuel-remaining sensors inside the aircraft were checked.
Move to Fuel Barn
 Here is an image of the X-59’s 13-foot General Electric F414 engine as the team prepares for a fit check. Making sure components, like the aircraft’s hydraulic lines, which help control functions like brakes or landing gear, and wiring of…
Engine Test Fit Install
Event: SEG 230 Nose The X-59’s nose is wrapped up safely and rests on a dolly before the team temporarily attaches it to the aircraft for fit checks at Lockheed Martin in Palmdale, California. The full length of the X-plane’s nose is 38-fee…
SEG 230 Nose
Event: SEG 230 Nose - Craned Onto Tooling A close up of the X-59’s duckbill nose, which is a crucial part of its supersonic design shaping. The team prepares the nose for a fit check. The X-59’s nose is 38-feet long – approximately one thir…
SEG 230 Nose - Craned Onto Tooling
Artist illustration of the X-59 in flight over land.
X59_Plate_003-Aug.jpg
Artist concept of the X-59 bottom view with landing gears down.
X59_Bot_LGD
Artist concept of the X-59 configuration views.
X59_B
This overhead shot of the X-59 Quiet SuperSonic Technology or QueSST aircraft shows the assembly progress of the vehicle during Spring 2021.  Pictured here you can see the nose (far left) which will later be mounted to the middle section in…
Manufacture Area From Above
This overview shot of the X-59 Quiet Supersonic Technology or QueSST aircraft shows the vehicle before a major merger of three major aircraft sections – the fuselage, the wing, and the tail assembly – together, making it looks more like an…
Manufacture Area From Above
This overhead shot of the X-59 assembly during Spring 2021 shows assembly with technicians working at the engine inlet section where the engine will be located on the aircraft.  Lockheed Martin Photography By Garry Tice 1011 Lockheed Way, P…
Manufacture Area From Above
Artist illustration of the X-59 taxiing on the runway.
Taxi_001_Aug_update.jpg
A Lockheed Martin Skunk Works technician works to complete wiring on the X-59 aircraft in preparation for the power-on system checkouts.  Once complete, the X-59 aircraft will demonstrate the ability to fly supersonic while reducing the lou…
Cockpit Lights SCO - Right Tomahawk Skin
An artist illustration of the Low-Boom Flight Demonstration vehicle flying over a community.
Low-Boom Flight Demonstration over land
NASA's 2017 astronaut candidates toured aircraft hangar at Armstrong Flight Research Center, in Southern California. On the right, NASA's, X-59 pilot Nils Larsen, briefs the astronauts as they look at Armstrong's fleet of supersonic researc…
Pilot Nils Larsen Speaks to Astronauts on X-59 Research Using Jets
A overhead view of the X-59 with its nose on. The X-59’s nose is 38-feet long – approximately one third of the length of the entire aircraft. The plane is under construction at Lockheed Martin Skunk Works in Palmdale, California, will fly t…
Manufacturing Area From Above
Event: Manufacturing Area From Above  A overhead view of the X-59 with its nose on. The X-59’s nose is 38-feet long – approximately one third of the length of the entire aircraft. The aircraft, under construction at Lockheed Martin Skunk Wo…
Manufacturing Area From Above
A Lockheed Martin technician prepares holes for installation of the fuselage panel on the X-59. The fuselage is the section of the aircraft that contains the cockpit. The aircraft, under construction at Lockheed Martin Skunk Works in Palmda…
LRC-2022-H1_P_X-59-8
Pictured here is a side view of the X-59 spine and engine inlet during assembly.  Lockheed Martin Photography By Garry Tice 1011 Lockheed Way, Palmdale, Ca. 93599 Event: SEG 210 Forebody, SEG 430 Spine, SEG 500 Empennage Date: 6/08/2021
SEG 210 Forebody, SEG 430 Spine, SEG 500 Empennage
Artist illustration of the X-59 in flight above the clouds with land below, flying left.
X59_Plate_002_WIP-Aug
Artist concept of the X-59 top view (pointing up)
X59_T-vertical
Artist concept of the X-59 side view (right side) with landing gears down.
X59_R_LGD
Artist concept of the X-59 side view (left side) with landing gears down.
X59_L_LGD
Artist concept of the X-59 side view (right side)
X59_R
Artist concept of the X-59 in flight overland.
X59_Flying_001-Aug
This overhead shot of the X-59 Quiet SuperSonic Technology or QueSST aircraft shows the assembly progress of the vehicle during Spring 2021. In the left side of the picture, the fuselage which contains the cockpit is shown and the right sid…
Manufacture Area From Above
AirVenture at Oshkosh 2024
AirVenture at Oshkosh 2024
Artist illustration of the X-59 in flight over land (with cities and rural areas below). Satellite image from USGS/NASA Landsat.
X-59-fying-over-land-15x11-300dpi
Artist illustration of the X-59 landing on the runway.
X59_Landing_001-new-update-Aug
NASA’s 2017 astronaut candidates toured aircraft hangar at Armstrong Flight Research Center, in Southern California where Jenni Sidey-Gibbons looks inside engine nozzle of F-15 jet. The F-15 will fly in tandem with the X-59 QueSST during ea…
Astronaut Looks at Nozzle of F-15 at Armstrong Flight Research Center
NASA's 2017 astronaut candidates toured aircraft hangar at Armstrong Flight Research Center, in Southern California. On the right, NASA's, X-59 pilot Nils Larsen, briefs the astronauts as they look at Armstrong's fleet of supersonic researc…
Pilot Nils Larsen Speaks to Astronauts on X-59 Research Using Jets
Event: Forebody and Nose - Windtunnel Testing A model of the X-59 forebody is shown in the Lockheed Martin Skunk Works’ wind tunnel in Palmdale, California. These tests gave the team measurements of wind flow angle around the aircraft’s nos…
Forebody and Nose - Windtunnel Testing
In July 2021, NASA associate administrator Bob Cabana visits Lockheed Martin in Palmdale, California to see the assembly of the X-59 QueSST.
P21-142-21
This is an image of the X-59 inlet with a safety covering. The inlet’s purpose is to adjust air speeds before they pass through the aircraft’s engine. The purpose of the covering is to protect the inlet and engine from foreign objects.
Critical Components - Forebody and Miscellaneous
Technicians are shown here working on the X-59 fuselage section of the aircraft.  The fuselage contains the cockpit and helps define the distinct shape of the X-59.  Lockheed Martin Photography By Garry Tice 1011 Lockheed Way, Palmdale, Ca.…
SEG 210 Forebody-Subsystems