CAPE CANAVERAL, Fla. –  The tools that will be used to service NASA's Hubble Space Telescope on the STS-125 mission are displayed in the NASA News Center at NASA's Kennedy Space Center in Florida.  This is a  closeup of a card extraction an…
KSC-2009-3032
Apollo-era technology spurred the development of cordless products that we take for granted everyday. In the 1960s, NASA asked Black Decker to develop a special drill that would be powerful enough to cut through hard layers of the lunar sur…
Benefit from NASA
ENGINEERS USING A STATE-OF-THE-ART VERTICAL WELDING TOOL AT THE MARSHALL SPACE FLIGHT CENTER IN HUNTSVILLE, ALA., MOVE A "PATHFINDER" VERSION OF THE ADAPTER DESIGN THAT WILL BE USED ON TEST FLIGHTS OF THE ORION SPACECRAFT AND NASA'S SPACE L…
1201013
Robert Lightfoot visited the facility housing the seven-axis milling tool as it performs work on the Spacecraft and Payload Integration adapters for the Space Launch System Program at MSFC. After a short tour, he took a few moment to addres…
1300327
STS-54 Endeavour, Orbiter Vehicle (OV) 105, Mission Specialist 1 (MS1) Mario Runco, Jr (right) and MS2 Gregory J. Harbaugh, holding an ESSEX wrench, examine mockup and tools prior to an underwater simulation in JSC's Weightless Environment…
STS-54 MS Runco and MS Harbaugh participate in briefing at JSC's WETF
ARES HARDWARE MOVE IN BUILDING 4755 OF A Y-RING INTO THE ROBOTIC WELD TOOL & THE COMMON BULKHEAD DOME MANUFACTURING DEMONSTRATION ARTICLE ONTO THE WOODEN TOOLING STANDS ON FEBRUARY 19, 2010
1000329
LAUNCH VEHICLE STAGE ADAPTER (LVSA) AFT CONE MOVE FROM THE VERTICAL WELD TOOL TO THE FLOOR OF BLDG 4755
LVSA AFT CONE MOVE
STS075-333-032 (22 Feb.- 9 March 1996) --- Astronaut Scott J. Horowitz, pilot, looks over tools he may use to perform an Inflight Maintenance (IFM) chore on the mid deck of the Earth-orbiting space shuttle Columbia. The glovebox facility is…
Astronaut Horowitz with tools
MULTI-PURPOSE CREW VEHICLE-TO-STAGE ADAPTER(MSA) FLIGHT HARDWARE ON CIRCUMFERENTIAL WELD TOOL, FEBRUARY 27, 2013
1300106
LAUNCH VEHICLE STAGE ADAPTER (LVSA) AFT CONE MOVE FROM THE VERTICAL WELD TOOL TO THE FLOOR OF BLDG 4755
LVSA AFT CONE MOVE
Documentation of a Large Cutter which will be used to support Russian Extravehicular Activity 32 (EVA 32) during Expedition 35. Part number (P/N) is SEG33106915-303, serial number (S/N) is 1008.
US Tool Gather for Russian EVA
ARES HARDWARE MOVE IN BUILDING 4755 OF A Y-RING INTO THE ROBOTIC WELD TOOL & THE COMMON BULKHEAD DOME MANUFACTURING DEMONSTRATION ARTICLE ONTO THE WOODEN TOOLING STANDS ON FEBRUARY 19, 2010
1000361
Goddard's Ritsko Wins 2011 SAVE Award  The winner of the 2011 SAVE Award is Matthew Ritsko, a Goddard financial manager. His tool lending library would track and enable sharing of expensive space-flight tools and hardware after projects no…
STS 135 Landing
LAUNCH VEHICLE STAGE ADAPTER (LVSA) AFT CONE MOVE FROM THE VERTICAL WELD TOOL TO THE FLOOR OF BLDG 4755
LVSA AFT CONE MOVE
ARES HARDWARE MOVE IN BUILDING 4755 OF A Y-RING INTO THE ROBOTIC WELD TOOL & THE COMMON BULKHEAD DOME MANUFACTURING DEMONSTRATION ARTICLE ONTO THE WOODEN TOOLING STANDS ON FEBRUARY 19, 2010
1000333
CAPE CANAVERAL, Fla. –  The tools that will be used to service NASA's Hubble Space Telescope on the STS-125 mission are displayed in the NASA News Center at NASA's Kennedy Space Center in Florida. On space shuttle Atlantis’ STS-125 mission,…
KSC-2009-3033
UAH ENGINEERING STUDENT ROBERT HILLAN TALKS TO SPACE STATION CREW MEMBERS ABOUT HIS WINNING 3-D PRINTED TOOL DESIGNED FOR USE ON ISS, AND IS INTERVIEWED BY LOCAL MEDIA
UAH STUDENT, ROBERT HILLAN, TALKS TO ISS CREW MEMBERS
UAH ENGINEERING STUDENT ROBERT HILLAN TALKS TO SPACE STATION CREW MEMBERS ABOUT HIS WINNING 3-D PRINTED TOOL DESIGNED FOR USE ON ISS, AND IS INTERVIEWED BY LOCAL MEDIA
UAH STUDENT, ROBERT HILLAN, TALKS TO ISS CREW MEMBERS
UAH ENGINEERING STUDENT ROBERT HILLAN TALKS TO SPACE STATION CREW MEMBERS ABOUT HIS WINNING 3-D PRINTED TOOL DESIGNED FOR USE ON ISS, AND IS INTERVIEWED BY LOCAL MEDIA
UAH STUDENT, ROBERT HILLAN, TALKS TO ISS CREW MEMBERS
MULTI-PURPOSE CREW VEHICLE-TO-STAGE ADAPTER(MSA) FLIGHT HARDWARE ON CIRCUMFERENTIAL WELD TOOL, FEBRUARY 27, 2013
1300107
ARES HARDWARE MOVE IN BUILDING 4755 OF A Y-RING INTO THE ROBOTIC WELD TOOL & THE COMMON BULKHEAD DOME MANUFACTURING DEMONSTRATION ARTICLE ONTO THE WOODEN TOOLING STANDS ON FEBRUARY 19, 2010
1000344
THE OVERHEAD VIEW OF THE FLOOR OF THE FRICTION STIR HIGH BAY AREA IN BUILDING 4755. THIS VIEW SHOWS FOUR DOME PIECES AS WELL AS THE SHELL BUCKLE BARREL PANEL IN THE VERTICAL WELD TOOL
1000460
FIVE SEGMENTS LOADED ONTO THE VERTICAL WELD TOOL FOR SHELL BUCKLING TEST IN BUILDING 4755
1000476
STS061-03-029 (2013 Dec 1993) --- Astronaut Jeffrey A. Hoffman displays tools used in the five space walks on the STS-61 Hubble Space Telescope (HST) repair mission.  Hoffman was one of four space walkers making use of the variegated gear.
Astronaut Jeffrey Hoffman displays tools for use on HST
LAUNCH VEHICLE STAGE ADAPTER (LVSA) AFT CONE MOVE FROM THE VERTICAL WELD TOOL TO THE FLOOR OF BLDG 4755
LVSA AFT CONE MOVE
LAUNCH VEHICLE STAGE ADAPTER (LVSA) AFT CONE MOVE FROM THE VERTICAL WELD TOOL TO THE FLOOR OF BLDG 4755
LVSA AFT CONE MOVE
FIVE SEGMENTS LOADED ONTO THE VERTICAL WELD TOOL FOR SHELL BUCKLING TEST IN BUILDING 4755
1000475
Goddard's Ritsko Wins 2011 SAVE Award  The winner of the 2011 SAVE Award is Matthew Ritsko, a Goddard financial manager. His tool lending library would track and enable sharing of expensive space-flight tools and hardware after projects no…
Robotic Refueling Mission
S73-27403 (June 1973) --- Engineers at the NASA Marshall Space Flight Center examine tools that are being considered for use in freeing the solar array wing of Skylab. The device at center is a cable cutter which is operated by cable. Enhan…
Tools being considered for use in freeing solar array wing of Skylab
Retired Marshall engineer Erich Engler demonstrates antiquated calculation and design tools used in Apollo days.
Erich Engler Demonstrates Calculation Tools
CAPE CANAVERAL, Fla. –  The tools that will be used to service NASA's Hubble Space Telescope on the STS-125 mission are displayed in the NASA News Center at NASA's Kennedy Space Center in Florida.  This is a  closeup  of the pistol grip too…
KSC-2009-3031
ENGINEERS USING A STATE-OF-THE-ART VERTICAL WELDING TOOL AT THE MARSHALL SPACE FLIGHT CENTER IN HUNTSVILLE, ALA., MOVE A "PATHFINDER" VERSION OF THE ADAPTER DESIGN THAT WILL BE USED ON TEST FLIGHTS OF THE ORION SPACECRAFT AND NASA'S SPACE L…
1201014
S93-35367 (Nov 1993) --- A close-up view of the special ratchet tool to be used by the STS-61 astronauts assigned to perform servicing of the Hubble Space Telescope (HST) in December of this year.  Four astronauts will perform a total of fi…
Special ratchet tool to be used by the STS-61 crew for HST repair
S87-49426 (1987) --- The Hubble Space Telescope (HST) tool box provides stowage of individual tools, tool boards and tool caddies required for maintenance of the telescope.  The basic box design was revised from the LEASAT (U.S. Navy) equip…
Hubble Space Telescope Toolbox and Tools in the Lobby of JSC Building 7A
Workers are shown assembling the vertical weld tool in support of the Ares/Constellation upperstage project.  This image extracted from high definition video and is the highest resolution available.
Advanced Concept
JAMES NEWTON, LEFT, PHILLIP THOMPSON, CENTER, AND DAVID LAWRENCE, RIGHT PREPARE COMPOSITE TOOL FOR CURE IN 18' X 20' AUTOCLAVE IN BUILDING 4707
18' X 20' AUTOCLAVE
FIVE SEGMENTS LOADED ONTO THE VERTICAL WELD TOOL FOR SHELL BUCKLING TEST IN BUILDING 4755
1000477
MULTI-PURPOSE CREW VEHICLE-TO-STAGE ADAPTER(MSA) FLIGHT HARDWARE ON CIRCUMFERENTIAL WELD TOOL, FEBRUARY 27, 2013
1300108
THE OVERHEAD VIEW OF THE FLOOR OF THE FRICTION STIR HIGH BAY AREA IN BUILDING 4755. THIS VIEW SHOWS FOUR DOME PIECES AS WELL AS THE SHELL BUCKLE BARREL PANEL IN THE VERTICAL WELD TOOL
1000461
S70-29505 (13-18 Feb. 1970) --- A prototype of the modular equipment transporter (MET), nicknamed the "Rickshaw" after its shape and method of propulsion. This equipment was used by the Apollo 14 astronauts during their geological and lunar…
Prototype of the Modular Equipment Transporter (MET)
LAUNCH VEHICLE STAGE ADAPTER (LVSA) AFT CONE MOVE FROM THE VERTICAL WELD TOOL TO THE FLOOR OF BLDG 4755
LVSA AFT CONE MOVE
LAUNCH VEHICLE STAGE ADAPTER (LVSA) AFT CONE MOVE FROM THE VERTICAL WELD TOOL TO THE FLOOR OF BLDG 4755
LVSA AFT CONE MOVE
MATERIALS ENGINEER LARRY PELHAM OF NASA’S MARSHALL SPACE FLIGHT CENTER IN HUNTSVILLE, ALABAMA, OPERATES THE CEUS AUTOMATED FIBER PLACEMENT CYLINDRICAL MANUFACTURING TOOL IN BUILDING 4707. THE TOOL WILL BE USED BY THE COMPOSITES FOR EXPLORAT…
The CEUS automated fiber placement cylindrical manufacturing tool
THE OVERHEAD VIEW OF THE FLOOR OF THE FRICTION STIR HIGH BAY AREA IN BUILDING 4755. THIS VIEW SHOWS FOUR DOME PIECES AS WELL AS THE SHELL BUCKLE BARREL PANEL IN THE VERTICAL WELD TOOL
1000462
ARES HARDWARE MOVE IN BUILDING 4755 OF A Y-RING INTO THE ROBOTIC WELD TOOL & THE COMMON BULKHEAD DOME MANUFACTURING DEMONSTRATION ARTICLE ONTO THE WOODEN TOOLING STANDS ON FEBRUARY 19, 2010
1000346
Goddard's Ritsko Wins 2011 SAVE Award  The winner of the 2011 SAVE Award is Matthew Ritsko, a Goddard financial manager. His tool lending library would track and enable sharing of expensive space-flight tools and hardware after projects no…
Inspecting Engineering Samples
FIVE SEGMENTS LOADED ONTO THE VERTICAL WELD TOOL FOR SHELL BUCKLING TEST IN BUILDING 4755
1000474
ARES HARDWARE MOVE IN BUILDING 4755 OF A Y-RING INTO THE ROBOTIC WELD TOOL & THE COMMON BULKHEAD DOME MANUFACTURING DEMONSTRATION ARTICLE ONTO THE WOODEN TOOLING STANDS ON FEBRUARY 19, 2010
1000349