
SPACE STATION MODEL MOCKUPS N-239A PROX-OPS (PROXIMITY OPERATIONS SIMULATOR) FABRICATION WITH PHIL CULBERTSON

The Orion spacecraft docked to the Gateway space station. Orion will visit Gateway for the first time on the Artemis IV mission when astronauts will use it to deliver the International Habitat (I-Hab) module to Gateway. Orion will return to…

Kennedy Space Center Director Bob Cabana speaks to guests during a ribbon cutting ceremony in the high bay of the Space Station Processing Facility at the Florida spaceport. The event celebrated completion of facility modifications to impro…

This artist's concept depicts the Space Station Freedom as it would look orbiting the Earth; illustrated by Marshall Space Flight Center artist, Tom Buzbee. Scheduled to be completed in late 1999, this smaller configuration of the Space Sta…

A crowd gathers for a ribbon cutting ceremony in the high bay of the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. The event celebrated completion of facility modifications to improve processing and free up zo…

David L. Iverson of NASA Ames Research Center, Moffett Field, California (in foreground) led development of computer software to monitor the conditions of the gyroscopes that keep the International Space Station (ISS) properly oriented in s…

jsc2023e010169 (1/30/2023) --- CapiSorb Visible System flight unit capillary condensing heat exchanger (CCHX) in N240 room 133B. The CapiSorb Visible System will be launched on SpaceX CRS-27 in March 2023 to the International Space Station…

CAPE CANAVERAL, Fla. – Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Dr. Takeshi Kobayashi, an assistant professor at Nagoya University in Japan, prepares samples for the Cell-Mechan…

CAPE CANAVERAL, Fla. – Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Dr. Takeshi Kobayashi, at left, an assistant professor at Nagoya University in Japan, and Dr. Toko Hashizume, an…

International Space Station (ISS) National Laboratory Workshop Public Presentation; The Internaional Space Station: Your Laboratory of the Future in NASA's Eagle Room Conference Ctr - panel for Q & A L-R Baruch Blumberg and Cheryl Nickerson

A crowd gathers for a ribbon cutting ceremony in the high bay of the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. The event celebrated completion of facility modifications to improve processing and free up zo…

International Space Station (ISS) National Laboratory Workshop - Public Presentation; The Internaional Space Station: Your Laboratory of the Future in NASA's Eagle Room Conference Ctr with Baruch Blumberg

CAPE CANAVERAL, Fla. – Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Akira Higashibata, a scientist with the Japan Aerospace Exploration Agency, or JAXA, prepares fluid to hold sampl…

Boeing Company technicians assemble the S-1 truss (starboard side truss) for the International Space Station at the Marshall Space Flight Center.

This artist's concept depicts the Space Station Freedom as it would look orbiting the Earth, illustrated by Marshall Space Flight Center artist, Tom Buzbee. Scheduled to be completed in late 1999, this smaller configuration of the Space Sta…

In response to President Reagan's directive to NASA to develop a permanent marned Space Station within a decade, part of the State of the Union message to Congress on January 25, 1984, NASA and the Administration adopted a phased approach t…

Space Station Data Systems Advance Portable Workstation (Computer). WNE

In response to President Reagan's directive to NASA to develop a permanent marned Space Station within a decade, part of the State of the Union message to Congress on January 25, 1984, NASA and the Administration adopted a phased approach t…

In response to President Reagan's directive to NASA to develop a permanent marned Space Station within a decade, part of the State of the Union message to Congress on January 25, 1984, NASA and the Administration adopted a phased approach t…

jsc2023e010168 (1/30/2023) --- CapiSorb Visible System flight unit contactor in N240 room 133B. The CapiSorb Visible System will be launched on SpaceX CRS-27 in March 2023 to the International Space Station to demonstrate a liquid sorbent-b…

In 1982, the Space Station Task Force was formed, signaling the initiation of the Space Station Freedom Program, and eventually resulting in the Marshall Space Flight Center's responsibilities for Space Station Work Package 1.

Kennedy Space Center Director Bob Cabana, far left, speaks to guests during a ribbon cutting ceremony in the high bay of the Space Station Processing Facility at the Florida spaceport. Joining Cabana, from the left, are Bill Dowdell, Kenned…

NASA Optical Communications Telescope Laboratory OCTL dome is located in Table Mountain, California. It is used in conjunction with the The Optical PAyload for Lasercomm Science OPALS.

During a ribbon cutting ceremony in the high bay of the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, center director Bob Cabana, far left, is joined by Bill Dowdell, Kennedy's International Space Station tech…

NASA Optical PAyload for Lasercomm Science OPALS operations team is seen at the Optical Communications Telescope Laboratory ground station during an operations planning retreat on February 13, 2014.

This artist's concept depicts the completely assembled International Space Station (ISS) passing over Florida and the Bahamas. As a gateway to permanent human presence in space, the Space Station Program is to expand knowledge benefiting al…

CAPE CANAVERAL, Fla. – Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Dr. Takeshi Kobayashi, at left, an assistant professor at Nagoya University in Japan, and Dr. Toko Hashizume, an…

David L. Iverson of NASA Ames Research center, Moffett Field, California, led development of computer software to monitor the conditions of the gyroscopes that keep the International Space Station (ISS) properly oriented in space as the ISS…

International Space Station (ISS) National Laboratory Workshop held at the NASA Ames Research Center, Moffett Field, CA . Baruch S. Blumberg at podium.

CAPE CANAVERAL, Fla. – Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a view through a microscope reveals one of the samples for the Cell-Mechanosensing 2 experiment for the Japan Aer…

Kennedy Space Center Director Bob Cabana, center, speaks to guests during a ribbon cutting ceremony in the high bay of the Space Station Processing Facility at the Florida Spaceport. The event celebrated completion of facility modifications…

CAPE CANAVERAL, Fla. – Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Akira Higashibata, a scientist with the Japan Aerospace Exploration Agency, or JAXA, prepares the Cell-Mechanosen…

Bill Dowdell, International Space Station technical director, speaks to guests during a ribbon cutting ceremony in the high bay of the Space Station Processing Facility at NASA's Kennedy Space Center in Florida spaceport. Joining him is Ken…

Dan Hartman is a global leader in human spaceflight with a storied 29-year career at NASA. He was the first program manager for Gateway. Dan retired from NASA in 2023.

This artist's concept depicts the completely assembled International Space Station (ISS) passing over the Straits of Gibraltar and the Mediterranean Sea. As a gateway to permanent human presence in space, the Space Station Program is to exp…

A MODEL ROCKET SIGNALS THE START OF THE ANNUAL RACIN' THE STATION DUATHLON AT THE MARSHALL SPACE FLIGHT CENTER SEPT. 27

NASA Optical PAyload for Lasercomm Science OPALS operations team at Kennedy Space Center Space Launch Complex-40 on April 14, 2014, with the SpaceX Falcon 9 rocket carrying OPALS in the background.

NASA Optical PAyload for Lasercomm Science OPALS integration and test team is seen at NASA Jet Propulsion Laboratory prior to OPALS shipment to Kennedy Space Center.

Kennedy Space Center Director Bob Cabana, center, talks with Bill Dowdell, Kennedy's International Space Station technical director, during a ribbon cutting ceremony in the high bay of the Space Station Processing Facility at the Florida sp…

During a ribbon cutting ceremony in the high bay of the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, center director Bob Cabana, far left, is joined by Bill Dowdell, Kennedy's International Space Station tech…
This frame from an animated GIF shows Earth moon moving below NASA OPALS laser instrument as seen by a robotic camera on the exterior of the International Space Station.

CAPE CANAVERAL, Fla. – Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Dr. Takeshi Kobayashi, an assistant professor at Nagoya University in Japan, prepares samples for the Cell-Mechan…

International Space Station (ISS) National Laboratory Workshop L-R Lynn Harper, Ames and Baruch Blumberg, Nobel Laureate, Fox Chase Cancer Center during talk on Science on the international Space Station, Past and Future.

CAPE CANAVERAL, Fla. – Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Dr. Takeshi Kobayashi, an assistant professor at Nagoya University in Japan, uses a microscope and computer monit…

This is an artist's concept of a modular space station. In 1970 the Marshall Space Flight Center arnounced the completion of a study concerning a modular space station that could be launched by the planned-for reusable Space Shuttle. The st…

This photo shows the Optical PAyload for Lasercomm Science OPALS stowed in the SpaceX Dragon trunk on April 22, 2014, two days after docking with the International Space Station.

NASA Optical PAyload for Lasercomm Science OPALS is seen in the SpaceX Dragon trunk following second stage separation of the SpaceX Falcon 9 rocket on April 18, 2014.

CAPE CANAVERAL, Fla. – Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a sample of the Cell-Mechanosensing 2 experiment for the Japan Aerospace Exploration Agency has been prepared for…