CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, a United Space Alliance technician installs a heat shield carrier panel on the space shuttle Endeavour.      The work is part of Transiti…
KSC-2012-4003
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance aerospace technicians Hector Castillo, left, and Tom Goldean inspect a heat shield carrier panel to be installed on…
KSC-2012-4007
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, former NASA astronaut Neil Armstrong right, who in July 1969 became the first man to set foot on the moon as commander of the Apollo 11 missi…
KSC-2012-2643
Stennis Space Center employees turned out in force to cheer space shuttle Endeavour as it flew low over the rocket engine test facility early on the morning of Sept. 19. The shuttle is headed to Los Angeles, where it will be on display at t…
Shuttle flyover
Space shuttle Endeavour made an early-morning flyover Stennis space Center on Sept. 19, en route to Los Angeles, where it will be displayed at the California Science Center. Employees viewed the low-level flyover from various locations, inc…
Shuttle flyover
CAPE CANAVERAL, Fla. -- The tail cone that will cover space shuttle Endeavour’s replica shuttle main engines arrives at Orbiter Processing Facility-2, or OPF-2, from the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida. I…
KSC-2012-4231
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians monitor the progress as space shuttle Endeavour’s payload bay doors begin to close for the final time.…
KSC-2012-3421
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technician Gary Hamilton installs a launch and entry seat on the space shuttle Endeavour's flight deck. The orbiter…
KSC-2012-4349
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance aerospace technicians install a heat shield around the base of space shuttle Endeavour’s replica shuttle main engin…
KSC-2012-3938
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians assist with the installation of the right orbital maneuvering system OMS pod on space shuttle Endeavour.…
KSC-2012-1924
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, the tail cone is moved into position for attachment to the space shuttle Endeavour. The tail cone covers the main engines in the aft prov…
KSC-2012-4271
CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians prepare the right side tail cone for buildup on space shuttle Endeavour. The tail cone protects space s…
KSC-2012-2833
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians monitor the progress as a large crane lifts the right orbital maneuvering system OMS pod for installation o…
KSC-2012-1903
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians prepare a heat shield for installation around space shuttle Endeavour’s replica shuttle main engines.…
KSC-2012-3964
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians install a heat shield around one of space shuttle Endeavour’s replica shuttle main engines.      The wo…
KSC-2012-3961
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, heat shield tiles are being installed around the base of space shuttle Endeavour’s replica shuttle main engines.      The work is part of…
KSC-2012-4005
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance aerospace technician Chris Peluso installs a heat shield carrier panel on the space shuttle Endeavour.      The wor…
KSC-2012-4004
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, former NASA astronaut Neil Armstrong, who in 1969 became the first man to set foot on the moon, sits in the commander's seat of space shuttle…
KSC-2012-2642
Space shuttle Endeavour embarked on the first leg of its final flight Sept. 19, departing Kennedy Space Center in Florida and making early-morning flyover visits to Stennis Space Center in Mississippi and nearby Michoud Assembly Facility in…
Shuttle flyover
Stennis Space Center employees turned out in force to cheer space shuttle Endeavour as it flew low over the rocket engine test facility early on the morning of Sept. 19. The shuttle is headed to Los Angeles, where it will be on display at t…
Shuttle flyover
Space shuttle Endeavour made an early-morning flyover Stennis space Center on Sept. 19, en route to Los Angeles, where it will be displayed at the California Science Center. Employees viewed the low-level flyover from various locations, inc…
Shuttle flyover
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, preparations are underway to install the ferry flight doors on space shuttle Endeavour.    The work is part of Transition and Retirement…
KSC-2012-4173
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians install an outer heat shield carrier panel on the space shuttle Endeavour.      The work is part of Tra…
KSC-2012-4123
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians have removed one of the auxiliary power units from space shuttle Endeavour and are placing it on a special…
KSC-2012-1889
Space Shuttle Endeavour touches down on the runway at Edwards Air Force Base, California to conclude International Space Station construction and supply mission STS-111.
Space Shuttle Endeavour touches down on the runway at Edwards Air Force Base, California to conclude International Space Station construction and supply mission STS-111
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians install a heat shield around one of space shuttle Endeavour’s replica shuttle main engines.      The wo…
KSC-2012-3963
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians help guide a large crane as it lowers the forward reaction control system (FRCS) for installation on space shuttle Endeavour.…
KSC-2012-1281
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians monitor the progress of space shuttle Endeavour’s payload bay doors as they are closed for the final ti…
KSC-2012-3426
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, the tail cone has been placed in position surrounding the replica main engines on the space shuttle Endeavour. The tail cone covers the m…
KSC-2012-4284
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a large crane lifts and moves the forward reaction control system (FRCS) for installation on space shuttl…
KSC-2012-1275
CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians use a crane to pick up the right side tail cone for buildup on space shuttle Endeavour. The tail cone p…
KSC-2012-2843
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, the tail cone is moved into position for attachment to the space shuttle Endeavour. The tail cone covers the main engines in the aft prov…
KSC-2012-4270
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance aerospace technician Tom Goldean installs a heat shield carrier panel on the space shuttle Endeavour.      The work…
KSC-2012-4006
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, Michael Williams of United Space Alliance paints the NASA logo -- known as the "meatball" -- on the left wing of space shuttle Endeavour.…
KSC-2012-2602
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, former NASA astronaut Neil Armstrong left, who in July 1969 became the first man to set foot on the moon as commander of the Apollo 11 missio…
KSC-2012-2644
Space shuttle Endeavour embarked on the first leg of its final flight Sept. 19, departing Kennedy Space Center in Florida and making early-morning flyover visits to Stennis Space Center in Mississippi and nearby Michoud Assembly Facility in…
Shuttle flyover
Space Shuttle Endeavour's tires produced a momentary puff of smoke as Mission STS-100 landed at NASA's Dryden Flight Research Center on Edwards Air Force Base, California, May 1, 2001.
Space Shuttle Endeavour touches down on the runway at Edwards Air Force Base, California
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians inspect space shuttle Endeavour’s payload bay doors after they were closed for the final time.     The…
KSC-2012-3429
CAPE CANAVERAL, Fla. -- United Space Alliance technicians monitor the progress as the tail cone that will cover space shuttle Endeavour’s replica shuttle main engines arrives at Orbiter Processing Facility-2, or OPF-2, from the Vehicle Asse…
KSC-2012-4232
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians prepare a heat shield for installation around space shuttle Endeavour’s replica shuttle main engines.…
KSC-2012-3966
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, a large crane moves the right orbital maneuvering system OMS pod closer to space shuttle Endeavour for installation.        The OMS pod under…
KSC-2012-1907
A long telephoto lens captured Space Shuttle Endeavour landing at Edwards Air Force Base, California, on May 1, 2001. NASA's Dryden Flight Research Center at Edwards would subsequently service the shuttle and mount it on a 747 for the ferry…
A long telephoto lens captured Space Shuttle Endeavour landing at Edwards Air Force Base, California, on May 1, 2001
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, a technician helps guide a large crane as it lowers the forward reaction control system (FRCS) for installation on space shuttle Endeavour.…
KSC-2012-1282
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, one of space shuttle Endeavour’s payload bay doors is closed as United Space Alliance technicians monitor the progress of the second door…
KSC-2012-3427
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians lift a heat shield on to one of the work platforms for installation around one of space shuttle Endeavo…
KSC-2012-3973
CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians prepare the right side tail cone for buildup on space shuttle Endeavour. The tail cone protects space s…
KSC-2012-2840
CAPE CANAVERAL, Fla. – This view inside the tail cone shows how it surrounds the replica main engines on the space shuttle Endeavour as a United Space Alliance technician checks the fittings. The cone has been placed in position covering th…
KSC-2012-4283
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility Bay 2 at NASA’s Kennedy Space Center in Florida, United Space Alliance technicians prepare a heat shield for installation around space shuttle Endeavour’s replica shuttle main engines.…
KSC-2012-3972