CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians prepare for a latching end effector to be lifted by crane from a work stand. The effector will be installed on an EXPRESS…
KSC-2009-4638
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a technician guides a latching end effector as it is lowered by crane toward an EXPRESS Logistics Carrier on which it will be install…
KSC-2009-4641
NASA structural materials engineer, Jonathan Lee, displays blocks and pistons as examples of some of the uses for NASA’s patented high-strength aluminum alloy originally developed at Marshall Space Flight Center in Huntsville, Alabama. NASA…
Benefit from NASA
Informal executive portrait of Marshall's sixth Center Director Thomas J. Lee (1989-1994) holding a model of the Hubble Space Telescope (HST).
Around Marshall
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the newly arrived ExPRESS Logistics Carrier 3, or ELC-3, is lifted high above the clean room floor.    ELC-3 and the Alpha Magnetic S…
KSC-2009-6673
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, workers dressed in clean room attire, known as bunny suits, begin to shut the hatch on the International Space Station's Node 3, name…
KSC-2009-6807
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, processing of Multi-Purpose Logistics Module Leonardo is under way for its trip to the International Space Station aboard space shutt…
KSC-2009-6570
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a science rack, supported by a rack insertion device, is prepared for installation inside Multi-Purpose Logistics Module Leonardo dur…
KSC-2009-6569
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the installation of resupply stowage racks and platforms in the interior of Multi-Purpose Logistics Module Leonardo has been complete…
KSC-2009-6689
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a rack insertion device with its accordion-like arm, at center, is ready to interface with the rack handling adapter, at right.  Inst…
KSC-2009-6677
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a payload technician dressed in clean room attire, known as a bunny suit, secures the hatch on the International Space Station's Node…
KSC-2009-6840
CAPE CANAVERAL, Fla. -- The dexterous humanoid astronaut helper, Robonaut 2, or R2, is ready to be moved to a horizontal position in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. Packed inside a launch box…
KSC-2010-4414
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, workers operate a rack insertion device being used to install science racks into Multi-Purpose Logistics Module Leonardo during proce…
KSC-2009-6575
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a crane lifts the cover from the transportation case protecting the ExPRESS Logistics Carrier 3, or ELC-3.    ELC-3 and the Alpha Mag…
KSC-2009-6669
CAPE CANAVERAL, Fla. -- The dexterous humanoid astronaut helper, Robonaut 2, or R2, is moved to a horizontal position in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. Packed inside a launch box called SLEE…
KSC-2010-4421
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, resupply stowage platforms with cargo bags attached are prepared for installation into Multi-Purpose Logistics Module Leonardo with t…
KSC-2009-6683
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Multi-Purpose Logistics Module Leonardo is ready for the next step in its processing to support space shuttle Discovery's STS-131 mis…
KSC-2009-6692
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a milestone has been reached in the processing of Multi-Purpose Logistics Module Leonardo to support space shuttle Discovery's STS-13…
KSC-2009-6691
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians prepare for a latching end effector to be lifted from a work stand. The effector will be installed on an EXPRESS Logistic…
KSC-2009-4637
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians check the bottom of a latching end effector being lifted by crane from a work stand. The effector will be installed on an…
KSC-2009-4639
RON LEE MANAGES THE 900 SQUARE FOOT TOOL CRIB IN BLDG. 4707
ADVANCED MANUFACTURING TEAM
President George Bush receives a placque commemorating the quincentenary of Columbus' voyage to the new world and exploration from Marshall's sixth Center Director Thomas J. Lee (1989-1994) during an address to Marshall employees. The three…
Around Marshall
Marshall's sixth Center Director Thomas J. Lee (1989-1994) touring the Payload Operations Control Center (POCC). The Hubble Space Telescope (HST) saw its launch into orbit under the leadership of Dr. Lee's administration.
Around Marshall
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a payload technician dressed in clean room attire, known as a bunny suit, secures the hatch on the International Space Station's Node…
KSC-2009-6841
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Multi-Purpose Logistics Module systems engineer Ken Koby, at left, and a team of Boeing technicians prepare to install a resupply sto…
KSC-2009-6680
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the newly arrived ExPRESS Logistics Carrier 3, or ELC-3, is lowered onto a work stand in the clean room.    ELC-3 and the Alpha Magne…
KSC-2009-6675
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, workers install a science rack, supported by the accordion-like arm of a rack insertion device, into Multi-Purpose Logistics Module L…
KSC-2009-6572
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the installation of resupply stowage racks and platforms into Multi-Purpose Logistics Module Leonardo has been completed to support s…
KSC-2009-6687
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Boeing technicians install a resupply stowage platform in Multi-Purpose Logistics Module Leonardo during processing for space shuttle…
KSC-2009-6686
CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the dexterous humanoid astronaut helper, Robonaut 2, or R2, is prepared for its lift and installation in a launch box called SLEEPR,…
KSC-2010-4390
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the interior of the International Space Station's Node 3, named Tranquility, is seen for the last time on Earth before its hatch is s…
KSC-2009-6806
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the accordion-like arm of a rack insertion device moves a science rack into position for installation inside Multi-Purpose Logistics…
KSC-2009-6568
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the newly arrived ExPRESS Logistics Carrier 3, or ELC-3, is lifted above two Multi-Purpose Logistics Modules positioned along the wal…
KSC-2009-6674
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians prepare to secure a latching end effector to the EXPRESS Logistics Carrier on which it is being installed for flight.  Th…
KSC-2009-4642
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a latching end effector is lowered by crane toward an EXPRESS Logistics Carrier on which it will be installed for flight.  The carrie…
KSC-2009-4640
Marshall Space Flight Center Director T. J. Lee greets President George Bush upon arrival at the Redstone Arsenal Airfield, June 20, 1990. During his visit Bush toured Marshall facilities and addressed Center employees.
MSFC Director T.J. Lee greets President George Bush
President George Bush and Alabama Governor Guy Hunt are greeted by Marshall's sixth Center Director Thomas J. Lee (1989-1994) upon their arrival at Redstone Arsenal (RSA) airfield. This was the first sitting president to visit Marshall Spac…
Around Marshall
Thomas Jack Lee served as the sixth director of the Marshall Space Flight Center from July 6, 1989 to January 6, 1994. Prior to the appointment, Lee held positions as Center Deputy Director (1980 - 1989) and Spacelab Program Manager (1973 -…
Around Marshall
President George Bush is taken for a tour of Huntsville Operations Support Center (HOSC) by Marshall's sixth Center Director Thomas J. Lee (1989-1994).
Around Marshall
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a Boeing technician pushes a rack handling adapter containing a resupply stowage platform toward the accordion-like arm of a rack ins…
KSC-2009-6678
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, workers install a science rack, supported by the accordion-like arm of a rack insertion device, into Multi-Purpose Logistics Module L…
KSC-2009-6573
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, processing of the International Space Station's Node 3, named Tranquility, nears completion.  Its cupola, seen in this view, is cover…
KSC-2009-6846
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the hatch on the International Space Station's Node 3, named Tranquility, is secured.    Hatch closure follows the completion of prep…
KSC-2009-6843
CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the dexterous humanoid astronaut helper, Robonaut 2, or R2, is secured to a base plate, which is part of its launch box called SLEEP…
KSC-2010-4394
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, workers dressed in clean room attire, known as bunny suits, prepare to shut the hatch on the International Space Station's Node 3, na…
KSC-2009-6805
CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the dexterous humanoid astronaut helper, Robonaut 2, or R2, is prepared for its lift and installation in a launch box called SLEEPR,…
KSC-2010-4391
CAPE CANAVERAL, Fla. -- The dexterous humanoid astronaut helper, Robonaut 2, or R2, is moved to a horizontal position in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. Packed inside a launch box called SLEE…
KSC-2010-4418
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Boeing technicians move resupply stowage platforms with cargo bags attached into Multi-Purpose Logistics Module Leonardo during proce…
KSC-2009-6684