CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, a transportation canister rolls toward a Pratt Whitney Rocketdyne space shuttle main engine (SSME).    This is the second…
KSC-2012-1022
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, a transportation canister is nearly closed around a Pratt Whitney Rocketdyne space shuttle main engine (SSME).    This is…
KSC-2012-1026
CAPE CANAVERAL, Fla. – Technicians move the work platforms away from a Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, hanging above the floor inside the SSME Processing Facility, the engine shop at NASA’s Kennedy Space Cen…
KSC-2012-1914
CAPE CANAVERAL, Fla. – Space shuttle main engines line the wall of the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida.    This is the second of the 15 engines used during the Space Shuttle Program to…
KSC-2012-1021
CAPE CANAVERAL, Fla. – Technicians move a portable workstand under a Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, inside the SSME Processing Facility, the engine shop at NASA’s Kennedy Space Center in Florida.  The engin…
KSC-2012-1917
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, technicians guide a transportation canister as it encloses a Pratt Whitney Rocketdyne space shuttle main engine (SSME).…
KSC-2012-1023
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, a Pratt Whitney Rocketdyne space shuttle main engine (SSME) is installed in a transportation canister.    This is the sec…
KSC-2012-1020
CAPE CANAVERAL, Fla. – Technicians release a crane from an engine-handling device and the Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, that it rotated into a horizontal position inside the SSME Processing Facility, the e…
KSC-2012-1921
CAPE CANAVERAL, Fla. – Technicians monitor a Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, as a crane lifts it off its base inside the SSME Processing Facility, the engine shop at NASA’s Kennedy Space Center in Florida.…
KSC-2012-1913
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, a transportation canister containing a Pratt & Whitney Rocketdyne space shuttle main engine (SSME) is lifted into positio…
KSC-2012-1042
CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Center in Florida, a transportation canister containing the last Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, is lowered ont…
KSC-2012-1974
CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, a flatbed truck prepares to depart from the Space Shuttle Main Engine Processing Facility carrying a transportation canister containing a Pratt & Whitney Rocketdyne space shu…
KSC-2012-1044
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Center in Florida, a Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, is prepared for loading into a waiting transportation can…
KSC-2012-1946
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, a transportation canister containing a Pratt & Whitney Rocketdyne space shuttle main engine (SSME) is secured onto a flat…
KSC-2012-1043
KENNEDY SPACE CENTER, FLA. - In the Space Shuttle Main Engine (SSME) Processing Facility, Boeing-Rocketdyne technicians lift SSME 2058, the first SSME fully assembled at KSC. The engine is being lifted from its vertical work stand into a ho…
KSC-04pd1643
KENNEDY SPACE CENTER, FLA. - In the Space Shuttle Main Engine (SSME) Processing Facility, Boeing-Rocketdyne crane operator Joe Ferrante (second from right) lifts SSME 2058, the first SSME fully assembled at KSC, with the assistance of other…
KSC-04pd1645
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, a technician oversees the closure of a transportation canister containing a Pratt Whitney Rocketdyne space shuttle main e…
KSC-2012-1025
CAPE CANAVERAL, Fla. – Preparations are under way to rotate a Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, inside the SSME Processing Facility, the engine shop at NASA’s Kennedy Space Center in Florida.    The engine is…
KSC-2012-1911
CAPE CANAVERAL, Fla. – Technicians lower a Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, onto a portable workstand inside the SSME Processing Facility, the engine shop at NASA’s Kennedy Space Center in Florida.  The engin…
KSC-2012-1918
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, a Pratt Whitney Rocketdyne space shuttle main engine (SSME) is ready for installation in a transportation canister.    Th…
KSC-2012-1018
CAPE CANAVERAL, Fla. – Technicians attach a Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, to an engine-handling device inside the SSME Processing Facility, the engine shop at NASA’s Kennedy Space Center in Florida.  Prepa…
KSC-2012-1912
CAPE CANAVERAL, Fla. – Technicians secure a Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, onto a portable workstand inside the SSME Processing Facility, the engine shop at NASA’s Kennedy Space Center in Florida.  The engi…
KSC-2012-1919
CAPE CANAVERAL, Fla. – A flatbed truck departs from the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Center in Florida transporting the last Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, to NASA's Ste…
KSC-2012-1976
CAPE CANAVERAL, Fla. -- A Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, is aligned with a transportation canister in the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Center in Florida. The engine is t…
KSC-2012-1945
CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Center in Florida, a transportation canister containing the last Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, is secured on…
KSC-2012-1975
CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, a flatbed truck prepares to depart from the Space Shuttle Main Engine Processing Facility carrying a transportation canister containing a Pratt & Whitney Rocketdyne space shu…
KSC-2012-1045
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, preparations are under way to lift a transportation canister containing a Pratt & Whitney Rocketdyne space shuttle main e…
KSC-2012-1040
CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Center in Florida, preparations are under way to load the transportation canister containing the last Pratt and Whitney Rocketdyne space shuttle…
KSC-2012-1972
CAPE CANAVERAL, Fla. -- Jeff Huie of Pratt and Whitney Rocketdyne monitors the progress of a space shuttle main engine, or SSME, as it is loaded into a transportation canister in the Orbiter Processing Facility-3 engine shop at NASA's Kenne…
KSC-2012-1948
CAPE CANAVERAL, Fla. -- The last Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, is enclosed in a transportation canister in the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Center in Florida. The engin…
KSC-2012-1951
KENNEDY SPACE CENTER, FLA. - In the Space Shuttle Main Engine (SSME) Processing Facility, Boeing-Rocketdyne quality inspector Nick Grimm (center) monitors the work of technicians on his team as they lower SSME 2058, the first SSME fully ass…
KSC-04pd1648
KENNEDY SPACE CENTER, FLA. - In the Space Shuttle Main Engine (SSME) Processing Facility, Boeing-Rocketdyne crane operator Joe Ferrante (left) lowers SSME 2058, the first SSME fully assembled at KSC, onto an engine stand with the assistance…
KSC-04pd1646
KENNEDY SPACE CENTER, FLA. - In the Space Shuttle Main Engine (SSME) Processing Facility, Boeing-Rocketdyne technicians steady SSME 2058, the first SSME fully assembled at KSC. The engine is being lifted from its vertical work stand into a…
KSC-04pd1644
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, technicians oversee the installation of a Pratt Whitney Rocketdyne space shuttle main engine (SSME) into a transportation…
KSC-2012-1024
CAPE CANAVERAL, Fla. – Preparations are under way for the crane to release an engine-handling device used to rotate a Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, into a horizontal position inside the SSME Processing Fac…
KSC-2012-1920
CAPE CANAVERAL, Fla. – A Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, is rotated into a horizontal position with the aid of an engine-handling device attached to a crane inside the SSME Processing Facility, the engine sh…
KSC-2012-1916
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, media representatives are on hand for the installation of a Pratt Whitney Rocketdyne space shuttle main engine (SSME) int…
KSC-2012-1019
CAPE CANAVERAL, Fla. – A crane moves a Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, across the floor away from the work platforms inside the SSME Processing Facility, the engine shop at NASA’s Kennedy Space Center in Flo…
KSC-2012-1915
CAPE CANAVERAL, Fla. – An engine-handling device is lowered to the floor of the SSME Processing Facility, the engine shop at NASA’s Kennedy Space Center in Florida. The fixture was used to rotate the Pratt and Whitney Rocketdyne space shutt…
KSC-2012-1923
CAPE CANAVERAL, Fla. – A crane moves the engine-handling device away from the Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, that it rotated into a horizontal position inside the SSME Processing Facility, the engine shop a…
KSC-2012-1922
CAPE CANAVERAL, Fla. -- Jeff Huie of Pratt and Whitney Rocketdyne watches as the last of the space shuttle main engines disappears into a transportation canister in the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Cente…
KSC-2012-1950
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, preparations are under way to install a Pratt Whitney Rocketdyne space shuttle main engine (SSME) into a transportation c…
KSC-2012-1017
CAPE CANAVERAL, Fla. -- A Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, begins to move into a transportation canister in the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Center in Florida. The engine…
KSC-2012-1947
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Center in Florida, a space shuttle main engine, or SSME, enters a transportation canister under the watchful eyes of Pratt and Whitney Rocketdy…
KSC-2012-1949
CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility-3 engine shop at NASA's Kennedy Space Center in Florida, a transportation canister containing the last Pratt and Whitney Rocketdyne space shuttle main engine, or SSME, is lifted onto…
KSC-2012-1973
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA’s Kennedy Space Center in Florida, a transportation canister containing a Pratt & Whitney Rocketdyne space shuttle main engine (SSME) glides above the floor…
KSC-2012-1041
KENNEDY SPACE CENTER, FLA. - In the Space Shuttle Main Engine (SSME) Processing Facility, Boeing-Rocketdyne technicians prepare to move SSME 2058, the first SSME fully assembled at KSC. The engine will be lifted from its vertical work stand…
KSC-04pd1640
KENNEDY SPACE CENTER, FLA. - In the Space Shuttle Main Engine (SSME) Processing Facility, Boeing-Rocketdyne technicians lower SSME 2058, the first SSME fully assembled at KSC, onto an engine stand. The engine is being moved from its vertica…
KSC-04pd1647