CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, workers use a Hyster forklift to slowly and carefully move a space shuttle main engine through an aperature on space shuttle Atlantis' aft en…
KSC-2010-1926
CAPE CANAVERAL, Fla. – A Pratt & Whitney Rocketdyne technician carefully maneuvers a space shuttle main engine into position on space shuttle Endeavour in Orbiter Processing Facility Bay 2 at NASA's Kennedy Space Center in Florida.  The eng…
KSC-2009-6125
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, space shuttle main engine #2 is nearly in position for installation on space shuttle Atlantis for its upcoming STS-132 mission.  A main engin…
KSC-2010-1927
CAPE CANAVERAL, Fla. - In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, workers prepare to lift a space shuttle main engine onto a transporter for its move to Orbiter Processing Facility-1, the…
KSC-2010-1917
CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center in Florida, a Hyster forklift delivers a space shuttle main engine to Orbiter Processing Facility-1 where it will be installed on space shuttle Atlantis for its upcoming STS-132 mission.…
KSC-2010-1921
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, workers inside space shuttle Atlantis' aft end prepare to install space shuttle main engine #2 on Atlantis for its upcoming STS-132 mission.…
KSC-2010-1923
CAPE CANAVERAL, Fla. - In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance workers carefully consider their readiness to lift a main engine.  The engine is being moved to Orb…
KSC-2009-6694
CAPE CANAVERAL, Fla. - In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, a main engine is secured to a transporter and ready for its move to Orbiter Processing Facility Bay 3.  There, it will be…
KSC-2009-6697
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, preparations are under way to install space shuttle main engine #2 on space shuttle Atlantis for its upcoming STS-132 mission.  A main engine…
KSC-2010-1922
CAPE CANAVERAL, Fla. - In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, work to prepare the space shuttle main engines for space shuttle Atlantis' STS-132 mission is under way.    Inspection an…
KSC-2009-6813
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, space shuttle Endeavour's main engine no. 2 is moved away from Orbiter Processing Bay 2 after removal from the shuttle. Engine removal is part of the post-landing processing.…
KSC-2009-4707
CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift remove main engine no. 2 from space shuttle Endeavour.  Engine removal is part of the post-landing processing.…
KSC-2009-4702
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, a team of Pratt and Whitney Rocketdyne employees installs a high pressure oxidizer turbo pump on space shuttle main engin…
KSC-2010-3101
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians remove one of three main engines from space shuttle Atlantis using a specially designed Hyster engine l…
KSC-2009-6725
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians check the nitrogen tank assembly before lifting and moving it to the Express Logistics Carrier 1, or ELC-1.  The carrier…
KSC-2009-4709
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians prepare to remove one of three main engines from space shuttle Atlantis using a specially designed Hyst…
KSC-2009-6723
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 3 at NASA's Kennedy Space Center in Florida, preparations begin to install the newly arrived space shuttle main engine in shuttle Discovery for the shuttle's STS-131 mission to the I…
KSC-2009-6707
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 3 at NASA's Kennedy Space Center in Florida, a United Space Alliance worker slowly maneuvers a space shuttle main engine into position for installation in shuttle Discovery for the s…
KSC-2009-6709
CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center in Florida, a space shuttle main engine is delivered to Orbiter Processing Facility Bay 3 where it will be installed in space shuttle Discovery during processing for the shuttle's STS-13…
KSC-2009-6699
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, two of three space shuttle main engines have been installed on space shuttle Atlantis for its upcoming STS-132 mission.  A main engine is 14…
KSC-2010-1928
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 3 at NASA's Kennedy Space Center in Florida, a United Space Alliance worker guides a space shuttle main engine into the aperture where it will be installed in shuttle Discovery for t…
KSC-2009-6713
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 3 at NASA's Kennedy Space Center in Florida, a United Space Alliance worker installs a space shuttle main engine in shuttle Discovery for the shuttle's STS-131 mission to the Interna…
KSC-2009-6714
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, workers guide a space shuttle main engine into position for installation on space shuttle Atlantis for its upcoming STS-132 mission.  A main…
KSC-2010-1925
CAPE CANAVERAL, Fla. - In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, a United Space Alliance worker monitors a main engine as it is lowered onto a transporter. The engine is being moved to O…
KSC-2009-6696
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 3 at NASA's Kennedy Space Center in Florida, United Space Alliance workers visually check the alignment of a space shuttle main engine approaching shuttle Discovery for the shuttle's…
KSC-2009-6711
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-3 at NASA's Kennedy Space Center in Florida, one of three main engines on space shuttle Discovery has been removed using a specially designed Hyster engine lift.  Inspection and maintena…
KSC-2010-3187
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians check the nitrogen tank assembly closely as an overhead crane lifts and moves it to the Express Logistics Carrier 1, or E…
KSC-2009-4712
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida, one of three main engines on space shuttle Atlantis has been removed using a specially designed Hyster engine lift.    Inspection and mai…
KSC-2009-6727
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians prepare to lift the nitrogen tank assembly to move it to the Express Logistics Carrier 1, or ELC-1. The carrier is part o…
KSC-2009-4708
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the nitrogen tank assembly is lowered onto the Express Logistics Carrier 1, or ELC-1. The carrier is part of the STS-129 payload on s…
KSC-2009-4716
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, Pratt and Whitney Rocketdyne engine technicians prepare to install a high pressure oxidizer turbo pump on space shuttle m…
KSC-2010-3098
CAPE CANAVERAL, Fla. – On the floor of the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, Pratt and Whitney Rocketdyne engine technicians lift a high pressure oxidizer turbo pump off its stand for i…
KSC-2010-3095
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 3 at NASA's Kennedy Space Center in Florida, a United Space Alliance worker moves a space shuttle main engine into position for installation in shuttle Discovery for the shuttle's ST…
KSC-2009-6708
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 3 at NASA's Kennedy Space Center in Florida, three space shuttle main engines have been installed in shuttle Discovery as processing for the shuttle's STS-131 mission to the Internat…
KSC-2009-6715
CAPE CANAVERAL, Fla. -- Two space shuttle main engines are undergoing processing in the 34,600-square-foot Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida.   The facility is a processing shop for engi…
KSC-2010-4299
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 3 at NASA's Kennedy Space Center in Florida, a United Space Alliance worker eases a space shuttle main engine toward shuttle Discovery during installation of the shuttle's engines to…
KSC-2009-6710
CAPE CANAVERAL, Fla. - In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance workers attach a lifting device to one of the main engines that will be installed in space shuttle…
KSC-2009-6693
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 3 at NASA's Kennedy Space Center in Florida, a space shuttle main engine fills the aperture where it will be installed in shuttle Discovery for the shuttle's STS-131 mission to the I…
KSC-2009-6712
CAPE CANAVERAL, Fla. - In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, United Space Alliance workers lift a main engine toward a transporter. The engine is being moved to Orbiter Processing Fa…
KSC-2009-6695
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians back one of three main engines on space shuttle Atlantis away from the shuttle using a specially design…
KSC-2009-6728
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the nitrogen tank assembly is moved toward the Express Logistics Carrier 1, or ELC-1. The carrier is part of the STS-129 payload on s…
KSC-2009-4714
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians attach a specially designed Hyster engine lift to one of three main engines on space shuttle Atlantis a…
KSC-2009-6724
CAPE CANAVERAL, Fla. – On the floor of the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, Pratt and Whitney Rocketdyne engine technician Dan Bode lifts a high pressure oxidizer turbo pump off its st…
KSC-2010-3096
CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, a Hyster forklift is moved into position to remove engine no. 2 from space shuttle Endeavour.  Engine removal is part of the post-landing processi…
KSC-2009-4698
CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift have removed main engine no. 2 from space shuttle Endeavour.  Engine removal is part of the post-landing proce…
KSC-2009-4705
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, Pratt and Whitney Rocketdyne engine technicians install a high pressure oxidizer turbo pump on space shuttle main engine…
KSC-2010-3099
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, space shuttle Endeavour's main engine no. 2 is moved out of Orbiter Processing Bay 2 after removal from the shuttle. Engine removal is part of the post-landing processing. En…
KSC-2009-4706
CAPE CANAVERAL, Fla. – In the Space Shuttle Main Engine Processing Facility at NASA's Kennedy Space Center in Florida, preparations are under way to install a high pressure oxidizer turbo pump on space shuttle main engine no. 2062, seen her…
KSC-2010-3097