CAPE CANAVERAL, Fla. – In the Astrotech payload processing facility at Port Canaveral, Fla., workers dressed in clean room attire, known as bunny suits, install supplies and other cargo in the Russian-built Mini-Research Module, or MRM, thr…
KSC-2010-2379
CAPE CANAVERAL, Fla. – In the Astrotech payload processing facility at Port Canaveral, Fla., supplies and other cargo are prepared for installation in the Russian-built Mini-Research Module, or MRM, in the background.  The six-member crew o…
KSC-2010-2376
CAPE CANAVERAL, Fla. – In the Astrotech payload processing facility at Port Canaveral, Fla., workers dressed in clean room attire, known as bunny suits, install supplies and other cargo in the Russian-built Mini-Research Module, or MRM, thr…
KSC-2010-2380
CAPE CANAVERAL, Fla. – At the Astrotech payload processing facility at Port Canaveral in Florida, members of the STS-132 crew receive instruction on the design and operation of the docking mechanism for the Mini-Research Module during their…
KSC-2010-2275
This diagram shows the general arrangement of the payloads to be carried by the multidisciplinary STS-107 Research-1 Space Shuttle mission in 2002. The Spacehab module will host experiments that require direct operation by the flight crew.…
Microgravity
CAPE CANAVERAL, Fla. – At the Astrotech payload processing facility at Port Canaveral in Florida, STS-132 Pilot Tony Antonelli, left, and Mission Specialist Michael Good discuss the Mini-Research Module behind them during their crew equipme…
KSC-2010-2284
KENNEDY SPACE CENTER, FLA. - STS-116 Mission Specialist Christer Fugelsang, who is with the European Space Agency, listens to instructions in the SPACEHAB module.   He and other crew members are taking part in equipment familiarization at S…
KSC-02pd1722
KENNEDY SPACE CENTER, FLA. -- Discovery rolls from the Vehicle Assembly Building to begin Orbiter Major Modifications.
KSC-02pd1200
KENNEDY SPACE CENTER, FLA. -- Discovery rolls from the Vehicle Assembly Building to begin Orbiter Major Modifications.
KSC-02pd1201
KENNEDY SPACE CENTER, FLA. -- Columbia sits inside an protective tent used to keep out moisture.  The orbiter is next scheduled to fly on mission STS-107 no earlier than Nov. 29.  STS-107 is a research mission. The payload includes the Hitc…
KSC-02pd1197
S77-E-5093 (25 May 1996) --- Astronaut Marc Garneau, mission specialist representing the Canadian Space Agency (CSA), makes a visual check of the Commercial Float Zone Furnace (CFZF), a single-rack-mounted facility in the Spacehab Module on…
Commercial Float Zone Furnace
KENNEDY SPACE CENTER, FLA. --  James Stickley and Kristin Rumpf, both with United Space Alliance - Main Propulsion System Engineering, discuss procedures about welding the minute cracks on Endeavour's flow liners.  Endeavour is scheduled to…
KSC-02pd1204
S77-E-5065 (21 May 1996) --- With a cloudy horizon scene as a backdrop, the Spartan 207 free-flyer is held in the grasp of the Space Shuttle Endeavour's Remote Manipulator System (RMS) following its re-capture on May 21, 1996.  The view was…
SPARTAN satellite on RMS arm
STS057-28-013 (21 June - 1 July 1993) --- With a camera and cable in hand, astronaut Janice E. Voss, mission specialist, floats through a special tunnel into the SpaceHab module.  Voss and five other NASA astronauts spent almost ten days ab…
Candid views of a crewmember in the SPACEHAB access tunnel.
STS060-15-003 (3-11 Feb 1994) --- This 35mm frame shows the major payloads of the Space Shuttle Discovery's STS-60 mission, backdropped against clouds over the Atlantic Ocean.  In the foreground is the SPACEHAB module, with the Wake Shield…
View of payloads in the STS-60 Discovery's payload bay while in orbit
The space shuttle Atlantis touches down on the runway at Edwards, California, at approximately 5:29 a.m. Pacific Standard Time after completing the highly successful STS-76 mission to deliver Astronaut Shannon Lucid to the Russian Space Sta…
STS-76 Landing - Space Shuttle Atlantis Lands at Edwards Air Force Base, Drag Chute Deploy
Interior of a Spacehab module showing the type of rack mounting that will be used, and crew working space that will be available, on the STS-107 Research 1 mission in 2002. Experiments plarned for the mission include soil mechanics, combust…
Microgravity
CAPE CANAVERAL, Fla. – At the Astrotech payload processing facility at Port Canaveral in Florida, STS-132 Mission Specialist Garrett Reisman compares the actual Mini-Research Module to a picture of the module during the crew equipment inter…
KSC-2010-2279
KENNEDY SPACE CENTER, FLA. -- STS-63 Mission Specialist Dr. Bernard Harris autographs copies of the crew photograph in the Training Auditorium during a March crew visit to thank employees for their help in ensuring a successful mission.  Th…
KSC-95PC-0439
CAPE CANAVERAL, Fla. – At the Astrotech payload processing facility at Port Canaveral in Florida, members of the STS-132 crew receive instruction on the design and operation of the docking mechanism for the Mini-Research Module during their…
KSC-2010-2277
KENNEDY SPACE CENTER, FLA. --  Discovery (shown here) has been inactive since its last mission that ended Aug. 22, 2001.  The orbiter has spent a year awaiting the start of its Orbiter Major Modification (OMM) period that is scheduled to be…
KSC-02pd1195
KENNEDY SPACE CENTER, FLA. -- STS-116 Mission Specialist Robert Curbeam handles a piece of equipment in the SPACEHAB module.  He and other crew members are taking part in equipment familiarization. Objective of their mission to the Internat…
KSC-02pd1719
KENNEDY SPACE CENTER, FLA. -- STS-116 Mission Specialist Christer Fugelsang, who is with the European Space Agency, gets instruction about a piece of equipment in the SPACEHAB module.  He and other crew members are taking part in equipment…
KSC-02pd1720
Astronaut Ronald M. Sega, payload commander, works in the glovebox facility in the Spacehab laboratory aboard the Earth-orbiting Space Shuttle Atlantis. The Spacehab facility was one f the busier research areas on Atlantis during the STS-76…
Microgravity
KENNEDY SPACE CENTER, FLA. -- Columbia sits inside an protective tent used to keep out moisture.  The orbiter is next scheduled to fly on mission STS-107 no earlier than Nov. 29.  STS-107 is a research mission. The payload includes the Hitc…
KSC-02pd1196
KENNEDY SPACE CENTER, FLA. --  Kristin Rumpf, with United Space Alliance - Main Propulsion System Engineering, looks over part of Endeavour before welding of the flow liner begins.  Endeavour is scheduled to fly on mission STS-113 in Novemb…
KSC-02pd1203
S77-E-5094 (25 May 1996) --- Astronaut Marc Garneau, mission specialist representing the Canadian Space Agency (CSA), stands at the Commercial Float Zone Furnace (CFZF) in the Spacehab Module onboard the Earth-orbiting Space Shuttle Endeavo…
Commercial Float Zone Furnace
STS060-31-028 (3-11 Feb. 1994) --- Five NASA astronauts and a Russian cosmonaut squeeze through the tunnel which connects the shirt-sleeve environments of the space shuttle Discovery and the SPACEHAB module. SPACEHAB is located in the space…
In-flight portrait of the STS-60 crew
S77-E-5052 (21 May 1996) --- The Spartan 207 free-flyer is held in a low-hover mode above its berth in the Space Shuttle Endeavour's cargo bay in the grasp of the Remote Manipulator System (RMS).  The free-flyer was re-captured by the six c…
SPARTAN satellite on RMS arm above Endeavour's payload bay
S77-E-5053 (21 May 1996) --- The Spartan 207 free-flyer is held in a low-hover mode above its berth in the Space Shuttle Endeavour's cargo bay in the grasp of the Remote Manipulator System (RMS).  The Spacehab module can be seen in the fore…
SPARTAN satellite on RMS arm above Endeavour's payload bay
STS060-74-054 (3-11 Feb 1994) --- The Wake Shield Facility (WSF) is held in the grasp of Discovery's Remote Manipulator System (RMS).  The 70mm image, backdropped against the blackness of space, also shows the SPACEHAB module in the forward…
Wake Shield Facility in grasp of the Remote Manipulator System
CAPE CANAVERAL, Fla. – In the Astrotech payload processing facility at Port Canaveral, Fla., workers dressed in clean room attire, known as bunny suits, install supplies and other cargo in the Russian-built Mini-Research Module, or MRM, thr…
KSC-2010-2378
CAPE CANAVERAL, Fla. – In the Astrotech payload processing facility at Port Canaveral, Fla., preparations are under way to install supplies and other cargo in the Russian-built Mini-Research Module, or MRM, at left.  The six-member crew of…
KSC-2010-2377
KKENNEDY SPACE CENTER, FLA. --  STS-116 crew members listen to instructions from a trainer (left) about equipment in the SPACEHAB module.   Starting second from left are Mission Specialist Christer Fugelsang, who is with the European Space…
KSC-02pd1721
Thisdiagram shows the general arrangement of the payloads to be carried by the multidisciplinary STS-107 Research-1 Space Shuttle mission in 2002. The Spacehab module will host experiments that require direct operation by the flight crew. O…
Microgravity
The Space Shuttle Orbiter Columbia STS-107 mission, launched January 16, 2003, is strictly a multidiscipline microgravity and Earth science research mission involving 80-plus International experiments tp be performed during 16-days, many of…
Space Shuttle Projects
CAPE CANAVERAL, Fla. – At the Astrotech payload processing facility at Port Canaveral in Florida, STS-132 Mission Specialists Michael Good, left, and Steve Bowen get a close-up view of the Mini-Research Module during their crew equipment in…
KSC-2010-2280
KENNEDY SPACE CENTER, FLA. --  STS-116 crew members take part in equipment familiarization in the SPACEHAB module.  From left are Mission Commander Terrence Wilcutt, Mission Specialist Robert Curbeam, Pilot William Oefelein and Mission Spec…
KSC-02pd1718
KENNEDY SPACE CENTER, FLA. -- Discovery rolls from the Vehicle Assembly Building to begin Orbiter Major Modifications.
KSC-02pd1199
KENNEDY SPACE CENTER, FLA. -- Discovery rolls from the Vehicle Assembly Building to begin Orbiter Major Modifications.
KSC-02pd1202
KENNEDY SPACE CENTER, FLA. -- Only the nose and tail of Columbia are visible as it sits inside an protective tent used to keep out moisture.  The orbiter is next scheduled to fly on mission STS-107 no earlier than Nov. 29.  STS-107 is a res…
KSC-02pd1198
KENNEDY SPACE CENTER, FLA. - Welder Jerry Goudy (left), with United Space Alliance, and his backup Jack Weeks, with Marshall Space Flight Center - Boeing, are ready to begin welding the minute cracks on Endeavour's flow liners. Endeavour is…
KSC-02pd1205
STS063-68-018 (3-11 Feb 1995) --- Russian cosmonaut Vladimir G. Titov, mission specialist, handles vials of samples for the Commercial Generic Bioprocessing Apparatus (CGBA) experiment in SpaceHab 3 Module onboard the Earth-orbiting Space S…
Russian cosmonaut Vladimir Titov works with samples for the CGBA
S77-E-5064 (21 May 1996)--- In this medium close-up view, captured by an Electronic Still Camera (ESC), the Spartan 207 free-flyer is held in the grasp of the Space Shuttle Endeavour's Remote Manipulator System (RMS) following its re-captur…
SPARTAN satellite on RMS arm
STS057-39-001 (27 June 1993) --- This high angle shot inside the SPACEHAB module, onboard the Space Shuttle Endeavour, typifies the pace of activity conducted there during the ten-day STS-57 mission. Astronaut Janice E. Voss (foreground), m…
STS-57 crewmembers work inside the SPACEHAB-01 module aboard OV-105
No more images