CAPE CANAVERAL, Fla. --  On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the open doors of the payload canister reveal space shuttle Discovery's payload, the integrated truss structure S6 and solar arrays, for the STS-119 missi…
KSC-2009-1109
CAPE CANAVERAL, Fla. –  United Space Alliance technicians remove and replace all the hub tiles on space shuttle Discovery before its STS-119 mission targeted for Feb. 12.   Hub tiles, heat protection tiles, are difficult to install because…
KSC-08pd3452
CAPE CANAVERAL, Fla. –   On Launch Pad 39A at NASA's Kennedy Space Center in Florida,  space shuttle Discovery's payload bay doors are being closed.  A worker checks the progress of the doors. The cargo consists of the integrated truss stru…
KSC-2009-1290
CAPE CANAVERAL, Fla. –   On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the second of space shuttle Discovery's payload bay doors is closing. The cargo inside consists of the integrated truss structure S6 and solar arrays for…
KSC-2009-1294
CAPE CANAVERAL, Fla. –   On Launch Pad 39A at NASA's Kennedy Space Center in Florida,  space shuttle Discovery's payload bay doors are being closed.  The cargo consists of the integrated truss structure S6 and solar arrays for the STS-119 m…
KSC-2009-1289
CAPE CANAVERAL, Fla. –  United Space Alliance technicians remove and replace all the hub tiles on space shuttle Discovery before its STS-119 mission targeted for Feb. 12.   Hub tiles, heat protection tiles, are difficult to install because…
KSC-08pd3453
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center, the final solar array wing for the International Space Station is moved into position for installation onto the S6 truss element. Scheduled to l…
KSC-08pd2051
In the Space Station Processing Facility at NASA's Kennedy Space Center, workers prepare to connect cables that will recharge the battery for the S6 integrated truss. The final starboard truss in the assembly of the International Space Stat…
Workers prepare to connect cables that will recharge the battery
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, a technician steadies the Pump Flow Control Subsystem (PFCS) as it is lifted and moved toward the S6 Truss.  The PFCS pumps and controls the liquid ammonia used to cool…
KSC-04pd1479
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (second from left) assists technicians position the Pump Flow Control Subsystem (PFCS) over the upper deck of the S6 Truss.  The PFCS pumps and…
KSC-04pd1480
KENNEDY SPACE CENTER, FLA. -- The Long Spacer (LS), the second and final piece of the Starboard 6 (S6) Integrated Truss Segment, is secured on a flatbed truck for transport to the Space Station Processing Facility where it will undergo insp…
KSC-02pd1945
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (second from left) assists technicians lower the Pump Flow Control Subsystem (PFCS) into position onto the upper deck of the S6 Truss.  The PFCS…
KSC-04pd1481
KENNEDY SPACE CENTER, FLA. -- The Long Spacer (LS), the second and final piece of the Starboard 6 (S6) Integrated Truss Segment, rolls out of NASA's Super Guppy cargo airplane onto a transporter.  The LS will be moved to the Space Station P…
KSC-02pd1944
CAPE CANAVERAL, Fla. --  The payload canister containing the S6 truss and solar arrays arrives at Launch Pad 39A at NASA's Kennedy Space Center in Florida. The canister sits below the Payload Changeout Room, or PCR. It will be lifted up to…
KSC-2009-1093
CAPE CANAVERAL, Fla. --  With red umbilical lines attached, the payload containing space shuttle Discovery's S6 truss and solar arrays is lifted up to the Payload Changeout Room, or PCR, on Launch Pad 39A at NASA's Kennedy Space Center in F…
KSC-2009-1097
CAPE CANAVERAL, Fla. --  The payload canister containing the S6 truss and solar arrays arrives at Launch Pad 39A at NASA's Kennedy Space Center in Florida. The canister sits below the Payload Changeout Room, or PCR. It will be lifted up to…
KSC-2009-1095
CAPE CANAVERAL, Fla. --  On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the doors of the payload canister are opened to transfer the space shuttle Discovery's payload into the Payload Changeout Room, or PCR. The payload for th…
KSC-2009-1107
CAPE CANAVERAL, Fla. --  On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the integrated truss structure S6 and solar arrays, the STS-119 mission payload, slowly move out of the payload canister into the Payload Changeout Room,…
KSC-2009-1110
CAPE CANAVERAL, Fla. –  United Space Alliance technicians remove and replace all the hub tiles on space shuttle Discovery before its STS-119 mission targeted for Feb. 12.   Hub tiles, heat protection tiles, are difficult to install because…
KSC-08pd3451
CAPE CANAVERAL, Fla. –  On Launch Pad 39A at NASA's Kennedy Space Center in Florida,  workers check the movement of space shuttle Discovery's payload bay doors as they close around the cargo.  The cargo consists of the integrated truss stru…
KSC-2009-1292
CAPE CANAVERAL, Fla. –  United Space Alliance technicians remove and replace all the hub tiles on space shuttle Discovery before its STS-119 mission targeted for Feb. 12.   Hub tiles, heat protection tiles, are difficult to install because…
KSC-08pd3450
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center, workers install the final solar array wing for the International Space Station onto the S6 truss element. Scheduled to launch on the STS-119 mis…
KSC-08pd2053
KENNEDY SPACE CENTER, FLA. - An Orbital Sciences L-1011 aircraft arrives at the Cape Canaveral Air Force Station Skid Strip.  Attached underneath the aircraft is the Pegasus XL Expendable Launch Vehicle, which will be transported to the Mul…
KSC-02pd1946
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (left) assists a technician check out the Pump Flow Control Subsystem (PFCS) before it is installed on the upper deck of the S6 Truss.  The PFCS…
KSC-04pd1478
KENNEDY SPACE CENTER, FLA. - Unpacking of the Pump Flow Control Subsystem (PFCS) begins in the Space Station Processing Facility.  The PFCS pumps and controls the liquid ammonia used to cool the various Orbital Replacement Units on the Inte…
KSC-04pd1476
KENNEDY SPACE CENTER, FLA. - After landing at the KSC Shuttle Landing Facility, NASA's Super Guppy cargo airplane opens to remove its cargo, the Long Spacer (LS), the second and final piece of the Starboard 6 (S6) Integrated Truss Segment.…
KSC-02pd1942
KENNEDY SPACE CENTER, FLA. - Technicians attach a crane to the Pump Flow Control Subsystem (PFCS) in the Space Station Processing Facility.  The PFCS pumps and controls the liquid ammonia used to cool the various Orbital Replacement Units o…
KSC-04pd1477
KENNEDY SPACE CENTER, FLA. -- Attached underneath the Orbital Sciences L-1011 aircraft is the Pegasus XL Expendable Launch Vehicle, which will be transported to the Multi-Payload Processing Facility for testing and verification.  The Pegasu…
KSC-02pd1947
KENNEDY SPACE CENTER, FLA. - - NASA's Super Guppy cargo airplane arrives at KSC carrying the Long Spacer (LS), the second and final piece of the Starboard 6 (S6) Integrated Truss Segment.  After landing and offloading, the LS will be transp…
KSC-02pd1940
CAPE CANAVERAL, Fla. --  With red umbilical lines attached, the payload containing space shuttle Discovery's S6 truss and solar arrays is lifted up to the Payload Changeout Room, or PCR, on Launch Pad 39A at NASA's Kennedy Space Center in F…
KSC-2009-1098
CAPE CANAVERAL, Fla. –  On Launch Pad 39A at NASA's Kennedy Space Center in Florida, one of space shuttle Discovery's payload bay doors has been closed.  The cargo inside consists of the integrated truss structure S6 and solar arrays for th…
KSC-2009-1293
CAPE CANAVERAL, Fla. –  United Space Alliance technicians remove and replace all the hub tiles on space shuttle Discovery before its STS-119 mission targeted for Feb. 12.   Hub tiles, heat protection tiles, are difficult to install because…
KSC-08pd3454
CAPE CANAVERAL, Fla. –  A closeup of hub tiles replaced on space shuttle Discovery before its STS-119 mission targeted for Feb. 12.  Hub tiles, heat protection tiles, are difficult to install because of their location on the inboard side of…
KSC-08pd3455
CAPE CANAVERAL, Fla. --  On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the doors of the payload canister open to reveal space shuttle Discovery's payload, the integrated truss structure S6 and solar arrays, for the STS-119 mi…
KSC-2009-1108
CAPE CANAVERAL, Fla. –  On Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Discovery's payload bay doors are closed.  Inside, the cargo consists of the integrated truss structure S6 and solar arrays for the STS-119 m…
KSC-2009-1295
CAPE CANAVERAL, Fla. --  On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the integrated truss structure S6 and solar arrays, the STS-119 mission payload, are moved into the Payload Changeout Room, or PCR. They will be installed…
KSC-2009-1111
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center, workers move the final solar array wing for the International Space Station into position for installation on the S6 truss element. Scheduled to…
KSC-08pd2052
CAPE CANAVERAL, Fla. --  The payload canister containing the S6 truss and solar arrays leaves the Canister Rotation Facility at NASA's Kennedy Space Center in Florida to head for Launch Pad 39A. The truss and arrays are space shuttle Discov…
KSC-2009-1092
In the Space Station Processing Facility at NASA's Kennedy Space Center, a worker holds a cable that will help recharge the battery for the S6 integrated truss. The final starboard truss in the assembly of the International Space Station, t…
Workers prepare to connect cables that will recharge the battery
KENNEDY SPACE CENTER, FLA.  - NASA's Super Guppy cargo airplane parks on the Shuttle Landing Facility at KSC before offloading the Long Spacer (LS), the second and final piece of the Starboard 6 (S6) Integrated Truss Segment.  The LS will b…
KSC-02pd1941
KENNEDY SPACE CENTER, FLA. - NASA's Super Guppy cargo airplane arrives at KSC carrying the Long Spacer (LS), the second and final piece of the Starboard 6 (S6) Integrated Truss Segment.  After landing and offloading, the LS will be transpor…
KSC-02pd1939
In the Space Station Processing Facility at NASA's Kennedy Space Center, a worker connects a cable to recharge the battery for the S6 integrated truss. The final starboard truss in the assembly of the International Space Station, the S6 is…
Workers prepare to connect cables that will recharge the battery
CAPE CANAVERAL, Fla. --  The payload canister containing the S6 truss and solar arrays arrives at Launch Pad 39A at NASA's Kennedy Space Center in Florida. The canister sits below the Payload Changeout Room, or PCR. It will be lifted up to…
KSC-2009-1094
KENNEDY SPACE CENTER, FLA. -- The Long Spacer (LS), the second and final piece of the Starboard 6 (S6) Integrated Truss Segment, rolls out of NASA's Super Guppy cargo airplane.  The LS will be transported to the Space Station Processing Fac…
KSC-02pd1943
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (left) assists technicians install the Pump Flow Control Subsystem (PFCS) onto the upper deck of the S6 Truss.  The PFCS pumps and controls the…
KSC-04pd1482
CAPE CANAVERAL, Fla. --  With red umbilical lines attached, the payload containing space shuttle Discovery's S6 truss and solar arrays is lifted up to the Payload Changeout Room, or PCR, on Launch Pad 39A at NASA's Kennedy Space Center in F…
KSC-2009-1096
No more images