A 107,000-gallon liquid hydrogen sphere no longer needed at Stennis Space Center is barged through the facility locks June 21. The rocket engine test facility has teamed with the Mississippi Department of Marine Resource to place the sphere…
Liquid hydrogen sphere project
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians inside the aft area monitor the progress as a Hyster forklift is used to remove Engine #1, the final engine to be removed from s…
KSC-2011-6533
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, a technician moves a Hyster forklift toward Engine #3 on space shuttle Atlantis. The forklift will be used to remove the engine and transpor…
KSC-2011-6520
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians use a Hyster forklift to position an engine removal device on Engine #3 on space shuttle Atlantis. The forklift will be used to…
KSC-2011-6522
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, a technician sitting on the Hyster forklift monitors the progress as the engine removal device moves toward Engine #1, the final engine to b…
KSC-2011-6532
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, a technician sits on top of the Hyster forklift to help guide the engine removal device toward Engine #1, the final engine to be removed fro…
KSC-2011-6531
Expedition 39 flight engineer Rick Mastracchio looks for a loose connection as he conducts troubleshooting operations on the Carbon Dioxide Removal Assembly (CDRA) in the Destiny U.S. Laboratory. Image was released by astronaut on Twitter.…
Mastracchio conducts CDRA troubleshooting in the US Lab
SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter.  ITA is slowly raised from bed of KMAG transporter and KMAG is removed.
SLS Intertank Test Article, ITA, is attached to crosshead of loa
SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter.  ITA is slowly raised from bed of KMAG transporter and KMAG is removed.
SLS Intertank Test Article, ITA, is attached to crosshead of loa
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1180
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1138
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1203
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1157
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1101
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians used a Hyster forklift to remove Engine #1, the final engine to be removed from space shuttle Atlantis. The forklift will be use…
KSC-2011-6536
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as they use a Hyster forklift to position an engine removal device on Engine #3 on space shuttle Atlantis.…
KSC-2011-6523
CAPE CANAVERAL, Fla. -- Technicians use a Hyster forklift to transport Engine #3 to the Engine Shop for possible future use after it was removed from space shuttle Atlantis in Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in…
KSC-2011-6527
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians move a Hyster forklift toward Engine #1, the final engine to be removed from space shuttle Atlantis. The forklift will be used t…
KSC-2011-6529
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians use a Hyster forklift to position an engine removal device on Engine #3 on space shuttle Atlantis. The forklift will be used to…
KSC-2011-6521
CAPE CANAVERAL, Fla. -- Technicians use a Hyster forklift to transport Engine #1, the final engine removed from space shuttle Atlantis, to the Engine Shop for possible future use. The engine was removed from Atlantis in Orbiter Processing F…
KSC-2011-6540
CAPE CANAVERAL, Fla. -- Technicians use a Hyster forklift to transport Engine #1, the final engine removed from space shuttle Atlantis, to the Engine Shop for possible future use. The engine was removed from Atlantis in Orbiter Processing F…
KSC-2011-6538
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, a technician moves a Hyster forklift toward Engine #3 on space shuttle Atlantis. The forklift will be used to remove the engine and transpor…
KSC-2011-6519
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, a technician moves a Hyster forklift toward Engine #3 on space shuttle Atlantis. The forklift will be used to remove the engine and transpor…
KSC-2011-6518
The flight demonstration unit of the next-generation 4-bed CO2 Scrubber (4BCO2) is targeted for launch aboard NG16 NET August 1, 2021. Once aboard the space station, this u nit will be mounted in a basic express rack. This four-bed technolo…
CO2 Scrubber (4BCO2) unit
SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter.  ITA is slowly raised from bed of KMAG transporter and KMAG is removed.
SLS Intertank Test Article, ITA, is attached to crosshead of loa
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1145
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1109
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1072
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_0948
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1186
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians used a Hyster forklift to remove Engine #3 from space shuttle Atlantis. The engine will be transported to the Engine Shop for po…
KSC-2011-6524
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, a technician moves a Hyster forklift toward Engine #3 on space shuttle Atlantis. The forklift will be used to remove the engine and transpor…
KSC-2011-6517
CAPE CANAVERAL, Fla. -- Technicians use a Hyster forklift to transport Engine #3 to the Engine Shop for possible future use after it was removed from space shuttle Atlantis in Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in…
KSC-2011-6528
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians move a Hyster forklift closer to Engine #1, the final engine to be removed from space shuttle Atlantis. The forklift will be use…
KSC-2011-6530
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians use a Hyster forklift to remove Engine #1, the final engine to be removed from space shuttle Atlantis. The forklift will be used…
KSC-2011-6534
CAPE CANAVERAL, Fla. -- Technicians use a Hyster forklift to transport Engine #3 to the Engine Shop for possible future use after it was removed from space shuttle Atlantis in Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in…
KSC-2011-6526
CAPE CANAVERAL, Fla. -- Technicians use a Hyster forklift to transport Engine #1, the final engine removed from space shuttle Atlantis, to the Engine Shop for possible future use. The engine was removed from Atlantis in Orbiter Processing F…
KSC-2011-6539
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians use a Hyster forklift to remove Engine #1, the final engine to be removed from space shuttle Atlantis. The forklift will be used…
KSC-2011-6535
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians, using a Hyster forklift, have removed Engine #3 from space shuttle Atlantis. The engine will be transported to the Engine Shop…
KSC-2011-6525
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians, using a Hyster forklift, have removed Engine #1, the final engine to be removed from space shuttle Atlantis. The forklift will…
KSC-2011-6537
SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter.  ITA is slowly raised from bed of KMAG transporter and KMAG is removed.
SLS Intertank Test Article, ITA, is attached to crosshead of loa
ISS037-E-021985 (28 Oct. 2013) --- In the International Space Station?s Tranquility node, NASA astronaut Michael Hopkins (right) and European Space Agency astronaut Luca Parmitano, both Expedition 37 flight engineers, perform routine in-fli…
CDRA Valve RR
Technicians are removed from SLS Intertank Test Article, ITA, after attaching to crosshead of load test Annex, Bldg. 4619,
SLS Intertank Test Article, ITA, is attached to crosshead of loa
Removal of hot box containing NEA Scout spacecraft from Thermal Vacuum Chamber V15   1 of 2
Removal of hot box containing NEA Scout spacecraft from Thermal Vacuum Chamber V15 1 of 2
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1163
AS13-62-8929 (11-17 April 1970) --- Interior view of the Apollo 13 Lunar Module (LM) showing the "mail box," a jury-rigged arrangement which the Apollo 13 astronauts built to use the Command Module (CM) lithium hydroxide canisters to purge…
Interior view of "mail box" for purging carbon dioxide from Lunar Module
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_0959
Following a successful Green Run hot fire at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, on March 18, members of a blended team work April 19-20 to remove the first core stage of the agency’s Space Launch System (SLS) rocke…
DSC_1091