
CAPE CANAVERAL, Fla. – Space Shuttle Endeavour is still on launch Pad 39A at NASA's Kennedy Space Center in Florida after the launch for the STS-127 mission was scrubbed at 1:55 a.m. EDT June 17 due to a gaseous hydrogen leak at the Ground…

CAPE CANAVERAL, Fla. – The rotating service structure is closed around space shuttle Endeavour on Launch Pad 39A at NASA's Kennedy Space Center in Florida after its launch for the STS-127 mission was scrubbed at 1:55 a.m. EDT June 17 due t…

CAPE CANAVERAL, Fla. – A closeup of NASA's Lunar Reconnaissance Orbiter, or LRO, and NASA's Lunar Crater Observation and Sensing Satellite, known as LCROSS, ready for liftoff on an Atlas V/Centaur rocket from Launch Pad 41 at Cape Canaveral…

CAPE CANAVERAL, Fla. – Space Shuttle Endeavour (center) is still on launch Pad 39A midday after the launch for the STS-127 mission was scrubbed at 1:55 a.m. EDT June 17 due to a gaseous hydrogen leak at the Ground Umbilical Carrier Plate,…

CAPE CANAVERAL, Fla. – The rotating service structure is closed around space shuttle Endeavour on Launch Pad 39A at NASA's Kennedy Space Center in Florida after its launch for the STS-127 mission was scrubbed at 1:55 a.m. EDT June 17 due t…

CAPE CANAVERAL, Fla. – After space shuttle Endeavour's rollout to Launch pad 39B at NASA's Kennedy Space Center in Florida this morning, two different shuttles are poised on two different launch pads. Shuttle Atlantis (foreground) already…

CAPE CANAVERAL, Fla. – After space shuttle Endeavour's rollout to Launch pad 39B at NASA's Kennedy Space Center in Florida this morning, two different shuttles are poised on two different launch pads. Shuttle Atlantis (foreground) already…

KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour rolls toward the Vehicle Assembly Building after leaving the Orbiter Processing Facility. In high bay 1 of the VAB, Endeavour will be attached to its external fuel t…

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, there is an unobstructed line of sight from inside space shuttle Endeavour’s middeck to its payload bay following the removal of the airlock,…

EDWARDS, Calif. – On Edwards Air Force Base in California, space shuttle Endeavour undergoes recovery operations after its landing. The orbiter convoy normally begins recovery operations in earnest about two hours before the shuttle is s…

KENNEDY SPACE CENTER, FLA. -- Getting ready for the STS-123 mission, space shuttle Endeavour, atop the well-lighted mobile launcher platform, passes the rotating service structure (left) and flame trench (below) on Launch Pad 39A. The jou…

CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Space Station Processing Facility, the Cupola module is being mated to the Tranquility node on the work stand. Cupola and Tranquility are the payload for space shuttle Endeavour's STS-…

EDWARDS, Calif. – At Edwards Air Force Base in California, STS-126 crew members are greeted as they exit the crew transport vehicle after landing aboard space shuttle Endeavour. Leading the crew is Commander Chris Ferguson (right) followed…

KENNEDY SPACE CENTER, FLA. -- At the NASA Kennedy Space Center's Shuttle Landing Facility, STS-123 Mission Specialist Robert L. Behnken waits in the aircraft that will return him to Houston. He and the other STS-123 crew members took part…

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, some of the consoles on space shuttle Endeavour’s flight deck are lit during transition and retirement processing of the shuttle. Endeavou…

KENNEDY SPACE CENTER, FLA. -- Following the simulated launch countdown, STS-123 crew members head for the slidewire baskets on Launch Pad 39 at NASA's Kennedy Space Center. The crew is practicing emergency egress from the pad. The countdo…

CAPE CANAVERAL, Fla. –In NASA Kennedy Space Center's Orbiter Processing Facility bay 2, a crane lifts space shuttle Endeavour's Orbiter Boom Sensor System out of the payload bay. After returning from the STS-127 mission July 31, 2009, Ende…

CAPE CANAVERAL, Fla. – Photographer Joel Powell, with Spaceflight Magazine, captures a closeup of NASA's Lunar Reconnaissance Orbiter, or LRO, and NASA's Lunar Crater Observation and Sensing Satellite, known as LCROSS, atop the Atlas V/Cen…

CAPE CANAVERAL, Fla. – NASA's Lunar Reconnaissance Orbiter, or LRO, and NASA's Lunar Crater Observation and Sensing Satellite, known as LCROSS, stand ready for liftoff on an Atlas V/Centaur rocket from Launch Pad 41 at Cape Canaveral Air F…

CAPE CANAVERAL, Fla. – After space shuttle Endeavour's rollout to Launch pad 39B at NASA's Kennedy Space Center in Florida this morning, two different shuttles are poised on two different launch pads. Shuttle Atlantis (left) already was on…

CAPE CANAVERAL, Fla. – After space shuttle Endeavour's rollout to Launch pad 39B at NASA's Kennedy Space Center in Florida this morning, two different shuttles are poised on two different launch pads. Shuttle Atlantis (left) already was on…

CAPE CANAVERAL, Fla. – After space shuttle Endeavour's rollout to Launch pad 39B at NASA's Kennedy Space Center in Florida this morning, two different shuttles are poised on two different launch pads. Shuttle Atlantis (left) already was on…

CAPE CANAVERAL, Fla. – After space shuttle Endeavour's rollout to Launch pad 39B at NASA's Kennedy Space Center in Florida this morning, two different shuttles are poised on two different launch pads. Shuttle Atlantis (right) already was o…

KENNEDY SPACE CENTER, FLA. -- In the transfer aisle of the Vehicle Assembly Building, space shuttle Endeavour is lifted off its transporter. The shuttle will be raised to a vertical position and lifted up into high bay 1 to be attached to…

KENNEDY SPACE CENTER, FLA. -- Inside the Orbiter Processing Facility, space shuttle Endeavour is ready for the rollover to the Vehicle Assembly Building. In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and so…

EDWARDS, Calif. – After space shuttle Endeavour's landing at Edwards Air Force Base in California, four of the STS-126 crew members pose for the media. From left are Pilot Eric Boe, Commander Chris Ferguson and Mission Specialists Shane Ki…

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A, Endeavour's payload bay doors are again closed and secure for launch. The payload bay doors were opened to allow for payload closeouts, including camera tests on the shuttle robotic ar…

KENNEDY SPACE CENTER, FLA. -- A water truck (at right) creates a ghostlike image against the black sky as it sprays the dust on the dry crawlerway in front of space shuttle Endeavour (at left). The shuttle is rolling out to Launch Pad 39…

KENNEDY SPACE CENTER, FLA. -- The mobile launcher platform with space shuttle Endeavour on top comes to rest on Launch Pad 39A. Prior to launch on the STS-123 mission, Endeavour will undergo three weeks of processing at the pad. At left…

KENNEDY SPACE CENTER, FLA. -- In the Vehicle Assembly Building, space shuttle Endeavour is lowered into high bay 1 toward the external tank seen below. The shuttle will be mated with the tank and solid rocket boosters in preparation for l…

KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour rolls out of the Orbiter Processing Facility on its way to the Vehicle Assembly Building. In high bay 1 of the VAB, Endeavour will be attached to its external fuel t…

KENNEDY SPACE CENTER, FLA. -- The mobile launcher platform with space shuttle Endeavour on top comes to rest on Launch Pad 39A. Prior to launch on the STS-123 mission, Endeavour will undergo three weeks of processing at the pad. The jour…

CAPE CANAVERAL, Fla. – The rotating service structure is closed around space shuttle Endeavour on Launch Pad 39A at NASA's Kennedy Space Center in Florida after its launch for the STS-127 mission was scrubbed at 1:55 a.m. EDT June 17 due t…

CAPE CANAVERAL, Fla. – The rotating service structure is closed around space shuttle Endeavour on Launch Pad 39A at NASA's Kennedy Space Center in Florida after its launch for the STS-127 mission was scrubbed at 1:55 a.m. EDT June 17 due t…

CAPE CANAVERAL, Fla. – NASA's Lunar Reconnaissance Orbiter, or LRO, and NASA's Lunar Crater Observation and Sensing Satellite, known as LCROSS, stand ready for liftoff on an Atlas V/Centaur rocket from Launch Pad 41 at Cape Canaveral Air F…

CAPE CANAVERAL, Fla. – The rotating service structure is closed around space shuttle Endeavour on Launch Pad 39A at NASA's Kennedy Space Center in Florida after its launch for the STS-127 mission was scrubbed at 1:55 a.m. EDT June 17 due t…

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the rotating service structure around space shuttle Atlantis begins to open to enable delivery and transfer of Atlantis' payload on April 18. After space sh…

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A, Endeavour's payload bay doors are open, revealing the cargo and equipment inside. At the top is the orbiter docking system; below it are the SPACEHAB module, the S5 truss and the external…

KENNEDY SPACE CENTER, FLA. -- At the NASA Kennedy Space Center's Shuttle Landing Facility, the jet aircraft carrying STS-123 crewmembers line up for takeoff on the return trip to Houston. The STS-123 crew took part in a terminal countdown…

KENNEDY SPACE CENTER, FLA. -- In the Vehicle Assembly Building, space shuttle Endeavour is lowered into high bay 1 toward the external tank seen below. The shuttle will be mated with the tank and solid rocket boosters in preparation for l…

KENNEDY SPACE CENTER, FLA. -- The mobile launcher platform with space shuttle Endeavour on top comes to rest on Launch Pad 39A. Prior to launch on the STS-123 mission, Endeavour will undergo three weeks of processing at the pad. At left…

KENNEDY SPACE CENTER, FLA. -- Emergency egress training completed, the STS-123 crew members gather at the slidewire baskets. Clockwise from left are Mission Specialists Mike Foreman, Garrett Reisman and Robert L. Behnken, Commander Dominic…

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, technicians on a Hyster forklift maneuver space shuttle main engine no. 3 into place on Endeavour. Each space shuttle main engine is 14 feet long, weighs about 6,700 pou…

KENNEDY SPACE CENTER, FLA. -- Getting ready for the STS-123 mission, space shuttle Endeavour, atop the well-lighted mobile launcher platform, passes the rotating service structure on Launch Pad 39A. The journey from the Vehicle Assembly…

KENNEDY SPACE CENTER, FLA. -- Inside space shuttle Endeavour, STS-123 Pilot Gregory H. Johnson goes through a checklist for the simulated launch countdown, which is the culmination of the terminal countdown demonstration test, or TCDT. The…

EDWARDS, Calif. – On Edwards Air Force Base in California, space shuttle Endeavour undergoes recovery operations after its landing. The orbiter convoy normally begins recovery operations in earnest about two hours before the shuttle is s…

CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Space Station Processing Facility, the Cupola module is being mated to the Tranquility node on the work stand. Cupola and Tranquility are the payload for space shuttle Endeavour's STS-1…

KENNEDY SPACE CENTER, FLA. -- Inside the Orbiter Processing Facility, space shuttle Endeavour settles on its transporter for the trip to the Vehicle Assembly Building. In high bay 1 of the VAB, Endeavour will be attached to its external fu…