EDWARDS, Calif. –- Space shuttle Endeavour kicks up dust as it touches down at Edwards Air Force Base in California at 4:25 p.m. EST to end the STS-126 mission, completing its 16-day journey of over 6.6 million miles in space. The main land…
KSC-08pd3851
EDWARDS, Calif. –-  A drag chute slows the speed of space shuttle Endeavour as it lands at Edwards Air Force Base in California after touching down at 4:25 p.m. EST to end the STS-126 mission, completing its 16-day journey of over 6.6 milli…
KSC-08pd3854
KENNEDY SPACE CENTER, FLA. --  In the transfer aisle of the Vehicle Assembly Building, space shuttle Endeavour is lifted off its transporter.  The shuttle will be raised to a vertical position and lifted up into high bay 1 to be attached to…
KSC-08pd0276
KENNEDY SPACE CENTER, FLA. -- Inside the Orbiter Processing Facility, space shuttle Endeavour is ready for the rollover to the Vehicle Assembly Building.  In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and so…
KSC-08pd0265
KENNEDY SPACE CENTER, FLA. --  In the Vehicle Assembly Building, space shuttle Endeavour is lowered into high bay 1 toward the external tank seen below.  The shuttle will be mated with the tank and solid rocket boosters in preparation for l…
KSC-08pd0282
KENNEDY SPACE CENTER, FLA. --  The mobile launcher platform with space shuttle Endeavour on top comes to rest on Launch Pad 39A.  Prior to launch on the STS-123 mission, Endeavour will undergo three weeks of processing at the pad.  At left…
KSC-08pd0354
KENNEDY SPACE CENTER, FLA. --   A water truck (at right) creates a ghostlike image against the black sky as it sprays the dust on the dry crawlerway in front of space shuttle Endeavour (at left).  The shuttle is rolling out to Launch Pad 39…
KSC-08pd0347
KENNEDY SPACE CENTER, FLA. --  The mobile launcher platform with space shuttle Endeavour on top comes to rest on Launch Pad 39A.  Prior to launch on the STS-123 mission, Endeavour will undergo three weeks of processing at the pad.  At left…
KSC-08pd0353
KENNEDY SPACE CENTER, FLA. --  In the Vehicle Assembly Building, space shuttle Endeavour is lowered into high bay 1 toward the external tank seen below.  The shuttle will be mated with the tank and solid rocket boosters in preparation for l…
KSC-08pd0281
KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour rolls out of the Orbiter Processing Facility on its way to the Vehicle Assembly Building.  In high bay 1 of the VAB, Endeavour will be attached to its external fuel t…
KSC-08pd0266
KENNEDY SPACE CENTER, FLA. --  The mobile launcher platform with space shuttle Endeavour on top comes to rest on Launch Pad 39A.  Prior to launch on the STS-123 mission, Endeavour will undergo three weeks of processing at the pad.  The jour…
KSC-08pd0352
KENNEDY SPACE CENTER, FLA. --  In the Vehicle Assembly Building, space shuttle Endeavour hangs vertically suspended above the transfer aisle.  Endeavour will be lifted up into high bay 1 to be lowered and attached to its external fuel tank…
KSC-08pd0279
KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour begins the rollover to the Vehicle Assembly Building.  In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and solid rocket boosters in pre…
KSC-08pd0269
KENNEDY SPACE CENTER, FLA. --  In Orbiter Processing Facility bay 2, technicians on a Hyster forklift install space shuttle main engine no. 3 into Endeavour.   Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and i…
KSC-07pd0133
EDWARDS, Calif. –-  Space shuttle Endeavour glides down the runway at Edwards Air Force Base in California after touching down at 4:25 p.m. EST to end the STS-126 mission, completing its 16-day journey of over 6.6 million miles in space.  T…
KSC-08pd3852
EDWARDS, Calif. –-  In the 52nd landing at Edwards Air Force Base in California, space shuttle Endeavour touches down at 4:25 p.m. EST to end the STS-126 mission, completing its 16-day journey of over 6.6 million miles in space.  The main l…
KSC-08pd3850
KENNEDY SPACE CENTER, FLA. --    On Launch Pad 39A, Endeavour's payload bay doors are open, revealing the cargo and equipment inside.  At the top is the orbiter docking system; below it are the SPACEHAB module, the S5 truss and the external…
KSC-07pd2119
KENNEDY SPACE CENTER, FLA. -- At the NASA Kennedy Space Center's Shuttle Landing Facility, the jet aircraft carrying STS-123 crewmembers line up for takeoff on the return trip to Houston.  The STS-123 crew took part in a terminal countdown…
KSC-08pd0603
EDWARDS, Calif. – After space shuttle Endeavour's landing at Edwards Air Force Base in California, four of the STS-126 crew members pose for the media.  From left are Pilot Eric Boe, Commander Chris Ferguson and Mission Specialists Shane Ki…
KSC-08pd3880
KENNEDY SPACE CENTER, FLA. --      On Launch Pad 39A, Endeavour's payload bay doors are again closed and secure for launch.   The payload bay doors were opened to allow for payload closeouts, including camera tests on the shuttle robotic ar…
KSC-07pd2125
KENNEDY SPACE CENTER, FLA. -- Emergency egress training completed, the STS-123 crew members gather at the slidewire baskets.  Clockwise from left are Mission Specialists Mike Foreman, Garrett Reisman and Robert L. Behnken, Commander Dominic…
KSC-08pd0593
KENNEDY SPACE CENTER, FLA. --   In Orbiter Processing Facility bay 2, technicians on a Hyster forklift maneuver space shuttle main engine no. 3 into place on Endeavour.  Each space shuttle main engine is 14 feet long, weighs about 6,700 pou…
KSC-07pd0134
KENNEDY SPACE CENTER, FLA. --   Getting ready for the STS-123 mission, space shuttle Endeavour, atop the well-lighted mobile launcher platform, passes the rotating service structure on Launch Pad 39A.  The journey from the Vehicle Assembly…
KSC-08pd0350
KENNEDY SPACE CENTER, FLA. -- Inside space shuttle Endeavour, STS-123 Pilot Gregory H. Johnson goes through a checklist for the simulated launch countdown, which is the culmination of the terminal countdown demonstration test, or TCDT.  The…
KSC-08pd0581
EDWARDS, Calif. –   On Edwards Air Force Base in California, space shuttle Endeavour undergoes recovery operations after its landing.  The orbiter convoy normally begins recovery operations in earnest about two hours before the shuttle is s…
KSC-08pd3886
CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Space Station Processing Facility, the Cupola module is being mated to the Tranquility node on the work stand.  Cupola and Tranquility are the payload for space shuttle Endeavour's STS-1…
KSC-2009-4978
KENNEDY SPACE CENTER, FLA. -- Inside the Orbiter Processing Facility, space shuttle Endeavour settles on its transporter for the trip to the Vehicle Assembly Building.  In high bay 1 of the VAB, Endeavour will be attached to its external fu…
KSC-08pd0264
KENNEDY SPACE CENTER, FLA. -- In the Vehicle Assembly Building, space shuttle Endeavour hangs vertically suspended above the transfer aisle.  Endeavour will be lifted up into high bay 1 to be attached to its external fuel tank and solid roc…
KSC-08pd0278
KENNEDY SPACE CENTER, FLA. --     On Launch Pad 39A, workers check the closing of Endeavour's payload bay doors.  The payload bay doors were opened to allow for payload closeouts, including camera tests on the shuttle robotic arm and the ex…
KSC-07pd2124
EDWARDS, Calif. –   At Edwards Air Force Base in California, photographers and journalists circle STS-126 crew members before their departure for NASA's Johnson Space Center in Houston.  The crew took time to talk to the media before they l…
KSC-08pd3884
EDWARDS, Calif. –- Space shuttle Endeavour glides down the runway at Edwards Air Force Base in California after touching down at 4:25 p.m. EST to end the STS-126 mission, completing its 16-day journey of over 6.6 million miles in space.  Th…
KSC-08pd3853
EDWARDS, Calif. –-  A drag chute slows the speed of space shuttle Endeavour as it lands at Edwards Air Force Base in California after touching down at 4:25 p.m. EST to end the STS-126 mission, completing its 16-day journey of over 6.6 milli…
KSC-08pd3855
KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour rolls toward the Vehicle Assembly Building after leaving the Orbiter Processing Facility.  In high bay 1 of the VAB, Endeavour will be attached to its external fuel t…
KSC-08pd0270
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, there is an unobstructed line of sight from inside space shuttle Endeavour’s middeck to its payload bay following the removal of the airlock,…
KSC-2012-2559
EDWARDS, Calif. –   On Edwards Air Force Base in California, space shuttle Endeavour undergoes recovery operations after its landing.  The orbiter convoy normally begins recovery operations in earnest about two hours before the shuttle is s…
KSC-08pd3885
KENNEDY SPACE CENTER, FLA. --  Getting ready for the STS-123 mission, space shuttle Endeavour, atop the well-lighted mobile launcher platform, passes the rotating service structure (left) and flame trench (below) on Launch Pad 39A.  The jou…
KSC-08pd0351
CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Space Station Processing Facility,  the Cupola module is being mated to the Tranquility node on the work stand.  Cupola and Tranquility are the payload for space shuttle Endeavour's STS-…
KSC-2009-4979
EDWARDS, Calif. – At Edwards Air Force Base in California, STS-126 crew members are greeted as they exit the crew transport vehicle after landing aboard space shuttle Endeavour.  Leading the crew is Commander Chris Ferguson (right) followed…
KSC-08pd3877
KENNEDY SPACE CENTER, FLA. -- At the NASA Kennedy Space Center's Shuttle Landing Facility, STS-123 Mission Specialist Robert L. Behnken waits in the aircraft that will return him to Houston.  He and the other STS-123 crew members took part…
KSC-08pd0597
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, some of the consoles on space shuttle Endeavour’s flight deck are lit during transition and retirement processing of the shuttle.    Endeavou…
KSC-2012-2560
KENNEDY SPACE CENTER, FLA. -- Following the simulated launch countdown, STS-123 crew members head for the slidewire baskets on Launch Pad 39 at NASA's Kennedy Space Center.  The crew is practicing emergency egress from the pad.  The countdo…
KSC-08pd0584
CAPE CANAVERAL, Fla. –In NASA Kennedy Space Center's Orbiter Processing Facility bay 2, a crane lifts space shuttle Endeavour's Orbiter Boom Sensor System out of the payload bay.  After returning from the STS-127 mission July 31, 2009, Ende…
KSC-2009-4976
KENNEDY SPACE CENTER, FLA. -- Following the simulated launch countdown, STS-123 Commander Dominic Gorie (left) and Pilot Gregory H. Johnson sit in the slidewire basket, part of emergency egress training.  The countdown was the culmination o…
KSC-08pd0591
KENNEDY SPACE CENTER, FLA. -- In the transfer aisle of the Vehicle Assembly Building, space shuttle Endeavour waits for the overhead crane (upper right) to be attached.  The crane will raise and then lift Endeavour into high bay 1. There, E…
KSC-08pd0274
KENNEDY SPACE CENTER, FLA. -- In the transfer aisle of the Vehicle Assembly Building, the suspended space shuttle Endeavour is slowly being raised to a vertical position.  It will then be lifted up into high bay 1 to be attached to its exte…
KSC-08pd0277
KENNEDY SPACE CENTER, FLA. -- Following the simulated launch countdown, STS-123 Mission Specialists Mike Foreman (left) and Robert L. Behnken complete their emergency egress practice on Launch Pad 39A at NASA's Kennedy Space Center.  The co…
KSC-08pd0589
KENNEDY SPACE CENTER, FLA. --    Looking into the open payload bay doors of Space Shuttle Endeavour, the S5 truss takes the spotlight.  Other cargo elements are the SPACEHAB module and the external stowage platform 3.  At lower right is the…
KSC-07pd2120
EDWARDS, Calif. – After space shuttle Endeavour's landing at Edwards Air Force Base in California, STS-126 Commander Chris Ferguson (left) and Pilot Eric Boe examine the tiles on space shuttle Endeavour for any visible damage.  The decision…
KSC-08pd3879