
KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center’s Orbiter Processing Facility Bay 3, technicians install a remote manipulator system, or space shuttle arm, previously installed on the orbiter Atlantis, in Discovery’s payload bay.…

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center’s Orbiter Processing Facility Bay 3, a remote manipulator system, or space shuttle arm, previously installed on the orbiter Atlantis, is being installed in Discovery’s payload bay.…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the Special Purpose Dexterous Manipulator, known as Dextre, moves nearer to the payload canister where it will be installed for transfer…

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, the remote manipulator system, or RMS, has been crated and prepared for shipment back to the Canadian Space Agency. The RMS, also call…

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, United Space Alliance workers monitor the progress as the container holding the remote manipulator system, or RMS, is lowered onto a flat…

KENNEDY SPACE CENTER, FLA. -- On the shortest day of the year, Discovery touches down at sunset on Runway 15 at NASA Kennedy Space Center's Shuttle Landing Facility as the sun sets, concluding mission STS-116. The rescue vehicles in the ba…

KENNEDY SPACE CENTER, FLA. -- The STS-120 crew members are ready for their return to flight to Houston. From left are Pilot George Zamka, Mission Specialists Paolo Nespoli, Doug Wheelock, Stephanie Wilson and Scott Parazynski, and Comman…

CAPE CANAVERAL, Fla. -- At Launch Pad 39A at NASA's Kennedy Space Center, the crawler-transporter is moved to the foot of the pad after delivering space shuttle Discovery for final prelaunch processing for the STS-124 mission. Discovery's…

KENNEDY SPACE CENTER, FLA. - Suspended by cables in bay 3 of the Orbiter Processing Facility, the orbiter boom sensor system is lowered toward its place in Discovery's payload bay. It was removed last week in order to inspect the power s…

KENNEDY SPACE CENTER, FLA. -- Sitting on the mobile launcher platform, Space Shuttle Discovery rolls toward Launch Pad 39B via the crawler transporter. First motion of the shuttle from NASA's Vehicle Assembly Building was at 12:45 p.m.…

KENNEDY SPACE CENTER, FLA. -- Viewed over the scrub near Runway 33 of the Shuttle Landing Facility at NASA's Kennedy Space Center, space shuttle Discovery is slowed by a drag chute behind it as it lands. The landing completes the 15-day mi…

CAPE CANAVERAL, Fla. -- Getting ready for the STS-124 mission, space shuttle Discovery begins rollout to Launch Pad 39A at NASA's Kennedy Space Center. The journey from the Vehicle Assembly Building began at 11:47 p.m. on May 2. After arriv…

CAPE CANAVERAL, Fla. – Space shuttle Discovery touches down on Runway 15 at NASA's Kennedy Space Center in Florida to complete the 13-day, 5.3-million mile journey on the STS-119 mission to the International Space Station. Main gear touchdo…

CAPE CANAVERAL, Fla. -- After greeting the media on their arrival on the Shuttle Landing Facility at NASA's Kennedy Space Center, the crew members of space shuttle Discovery's STS-124 mission wave and head for the van that will take them t…

KENNEDY SPACE CENTER, FLA. -- Moderator George Diller, public information officer at the NASA News Center at NASA's Kennedy Space Center, introduces the STS-120 crew after their successful landing aboard space shuttle Discovery earlier in…

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center’s Orbiter Processing Facility Bay 3, technicians install a remote manipulator system, or space shuttle arm, previously installed on the orbiter Atlantis, in Discovery’s payload bay.…

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, United Space Alliance workers monitor the progress as the container holding the remote manipulator system, or RMS, is lowered onto a flat…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the Special Purpose Dexterous Manipulator, known as Dextre, moves closer to the payload canister where it will be installed for transfer…

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, United Space Alliance workers attach lifting cranes to the container holding the remote manipulator system, or RMS. The RMS is placed on…

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, United Space Alliance workers monitor the progress as the container holding the remote manipulator system, or RMS, is lifted. The RMS wil…

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, United Space Alliance workers help guide the container holding the remote manipulator system, or RMS, onto a flatbed truck for shipment b…

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, a United Space Alliance worker attaches lifting cranes to the container holding the remote manipulator system, or RMS. The RMS will be pl…

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, members of the STS-124 crew inspect space shuttle Discovery during a crew equipment interface test. Seen, top to bottom are Pilot Kenne…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, workers close the hatch on the Japanese Experiment Module, called Kibo. The closing is in preparation for the transfer to a payload can…

KENNEDY SPACE CENTER, FLA. -- The drag chute deployed behind space shuttle Discovery helps slow its smooth landing on Runway 33 of the Shuttle Landing Facility at NASA's Kennedy Space Center, completing the 15-day mission STS-120. Main g…

KENNEDY SPACE CENTER, FLA. -- Seen from behind, space shuttle Discovery kicks up dust as it touches down on Runway 33 of the Shuttle Landing Facility at NASA's Kennedy Space Center to complete the 15-day mission STS-120. Main gear touchdow…

CAPE CANAVERAL, Fla. – Shuttle Launch Director Mike Leinbach, left, talks with STS-119 Pilot Tony Antonelli beneath space shuttle Discovery on Runway 15 at NASA's Kennedy Space Center in Florida. Discovery’s landing completed the 13-day, 5…

KENNEDY SPACE CENTER, FLA. -- On its slow 4.2-mile journey via the crawlerway to Launch Pad 39B, Space Shuttle Discovery passes the barge in the turn basin. In the foreground on the south side of the basin is the flag and countdown clock n…

CAPE CANAVERAL, Fla. – Members of the STS-119 crew pose for a group portrait in front of space shuttle Discovery on Runway 15 at NASA's Kennedy Space Center in Florida, following return from their 13-day, 5.3-million mile journey on the STS…

KENNEDY SPACE CENTER, FLA. -- During a crew equipment interface test in the Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, STS-124 Pilot Kenneth Ham checks a manual in the cockpit of space shuttle Discovery. The shuttle w…

KENNEDY SPACE CENTER, FLA. --In the Space Station Processing Facility at NASA's Kennedy Space Center, workers inside the payload canister remove an overhead crane from the integrated cargo carrier-lite, or ICC-L. The ICC-L is an unpressuri…

KENNEDY SPACE CENTER, FLA. -- The space shuttle Discovery is slowed by a drag chute behind it as it lands on Runway 33 of the Shuttle Landing Facility at NASA's Kennedy Space Center. he landing completes the 15-day mission STS-120 to the I…

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida, a worker maneuvers space shuttle main engine No. 1 toward the aft opening in space shuttle Discovery for installation. Each engine is 14…

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center’s Orbiter Processing Facility Bay 3, a remote manipulator system, or space shuttle arm, previously installed on the orbiter Atlantis, is being installed in Discovery’s payload bay.…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the Special Purpose Dexterous Manipulator, known as Dextre, moves across the facility via an overhead crane to the payload canister for t…

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, United Space Alliance workers help guide the container holding the remote manipulator system, or RMS, onto a flatbed truck for shipment b…

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, United Space Alliance workers position the container holding the remote manipulator system, or RMS, onto a flatbed truck for shipment bac…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, an overhead crane moves the Special Purpose Dexterous Manipulator, known as Dextre, to the payload canister for transfer to Launch Pad 39…

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, the remote manipulator system, or RMS, has been crated and prepared for shipment back to the Canadian Space Agency. The RMS, also call…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the Special Purpose Dexterous Manipulator, known as Dextre, moves across the facility via an overhead crane to the payload canister at ri…

KENNEDY SPACE CENTER, FLA. -- The STS-120 crew members are greeted by NASA and Kennedy VIPs after completing their successful mission. From left are STS-120 mission specialists Doug Wheelock, Stephanie Wilson and Scott Parazynski, Pilot G…

KENNEDY SPACE CENTER, FLA. -- After a 15-day mission to the International Space Station, space shuttle Discovery touches down on Runway 33 of the Shuttle Landing Facility at NASA's Kennedy Space Center, completing mission STS-120. Main g…

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center, a crawler transporter moves space shuttle Discovery, secured atop a mobile launch platform, along the crawlerway from the Vehicle Assembly Building to Launch Pad 39A to prepare for the…

KENNEDY SPACE CENTER, FLA. -- STS-120 mission specialist Stephanie Wilson is happy to be back at NASA's Kennedy Space Center after the 15-day mission to the International Space Station aboard space shuttle Discovery. The Discovery crew c…

CAPE CANAVERAL, Fla. – With the aid of a drogue chute, space shuttle Discovery slows to a stop on Runway 15 at NASA's Kennedy Space Center in Florida to complete the 13-day, 5.3-million mile journey on the STS-119 mission to the Internation…

KENNEDY SPACE CENTER, FLA. - In bay 3 of the Orbiter Processing Facility, the orbiter boom sensor system (OBSS) is lifted off a stand. The boom will be reinstalled in Discovery's payload bay. It was removed last week in order to inspect…

KENNEDY SPACE CENTER, FLA. -- STS-120 Commander Pamela Melroy takes part in a news conference after the crew's successful landing aboard space shuttle Discovery at NASA's Kennedy Space Center. The crew completed a 15-day mission to the I…

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Discovery leaves the confines of NASA's Vehicle Assembly Building as begins its slow 4.2-mile journey via the crawlerway to Launch Pad 39B. The shuttle rests on a mobile launcher platform that s…