CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, the Orbital Replacement Unit Carrier, or ORUC, is lowered toward the payload canister.  The canister will deliver the ORUC and oth…
KSC-2009-2681
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the payload ground-handling mechanism, known as the PGHM, is retracted after installing the payloads in space shuttle Atlantis' payload bay, at right, for t…
KSC-2009-2979
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Atlantis' payload bay is filled with hardware for the STS-125 mission to service NASA's Hubble Space Telescope. At the bottom are the Flight S…
KSC-2009-2981
CAPE CANAVERAL, Fla. –   In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, the Fine Guidance Sensor Scientific Instrument Protective Enclosure, or FSIPE, cover has been installed on the Orbital Replacement Unit Car…
KSC-08pd2361
CAPE CANAVERAL, Fla. –  In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, the Fine Guidance Sensor, or FGS, is lifted over the crossbar of the stand.  The sensor will be installed on the Orbital Replacement Unit Ca…
KSC-08pd2352
CAPE CANAVERAL, Fla. –  A specialized crane is moved toward the Fine Guidance Sensor in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center. The sensor will be lifted and moved to the Orbital Replacement Unit Carrier or…
KSC-08pd2345
CAPE CANAVERAL, Fla. –   Technicians in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center install a specialized overhead crane onto the Fine Guidance Sensor, or FGS. The sensor will be lifted and moved to the Orbital R…
KSC-08pd2347
CAPE CANAVERAL, Fla. –    A specialized overhead crane lifts the Fine Guidance Sensor, or FGS, in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center.  The sensor will be moved to the Orbital Replacement Unit Carrier, or…
KSC-08pd2348
CAPE CANAVERAL, Fla. -  A rainbow completes this unique panorama of two space shuttles on the launch pads at the same time, the first time since July 2001. At upper right is STS-126 mission’s space shuttle Endeavour, which rolled out Sept.…
KSC-08pd3013
CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Mission Specialist Andrew Feustel touches the thermal protection system tiles on space shuttle Atlantis with a gloved hand during a crew equip…
KSC-08pd1937
CAPE CANAVERAL, Fla. -  On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the Super Lightweight Interchangeable Carrier is installed behind the shuttle external airlock (top) in space shuttle Atlantis’ payload bay for the STS-125…
KSC-08pd2953
CAPE CANAVERAL, Fla. –  In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 crew members look at cameras they will use on the mission.  From left are Mission Specialists Mike Massimino, Andrew Feustel and Mike Good, P…
KSC-08pd1942
CAPE CANAVERAL, Fla. -   In At NASA's Kennedy Space Center in Florida, the payload ground handling mechanism in the Payload Changeout Room on Launch Pad 39A is viewed from the rear as it transfers the STS-125 mission payload into space shut…
KSC-08pd2956
CAPE CANAVERAL, Fla. -   At NASA's Kennedy Space Center in Florida, workers check data on the payload ground handling mechanism, or PGHM, in the Payload Changeout Room on Launch Pad 39A.  The PGHM is being used to transfer the STS-125 missi…
KSC-08pd2957
CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center, a technician points to the landing gear on the underside of space shuttle Atlantis as STS-125 crew members look on.  In the foreground are Mission Spe…
KSC-08pd1934
CAPE CANAVERAL, Fla. –  In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 crew members look at some of the equipment that will be on their mission.  From right are Mission Specialist Megan McArthur, Pilot Gregory C.…
KSC-08pd1947
CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center, a technician (hand raised) discusses details about space shuttle Atlantis with crew members for the STS-125 Hubble Servicing Mission.  From left, the…
KSC-08pd1938
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, the Orbital Replacement Unit Carrier, or ORUC, is lowered into the payload canister.  The canister will deliver the ORUC and other…
KSC-2009-2682
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the payload ground-handling mechanism, known as the PGHM, is retracted after installing the payloads in space shuttle Atlantis' payload bay for the STS-125…
KSC-2009-2978
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Atlantis' payload bay is filled with hardware for the STS-125 mission to service NASA's Hubble Space Telescope.  From the bottom are the Fligh…
KSC-2009-2982
CAPE CANAVERAL, Fla. –  In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, workers help guide the Fine Guidance Sensor Scientific Instrument Protective Enclosure, or FSIPE, cover alongside the Orbital Replacement Un…
KSC-08pd2358
CAPE CANAVERAL, Fla. –  In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, workers lift the Fine Guidance Sensor Scientific Instrument Protective Enclosure, or FSIPE, cover before attaching a crane.  The cover will…
KSC-08pd2355
CAPE CANAVERAL, Fla. –   In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, workers help maneuver the Fine Guidance Sensor Scientific Instrument Protective Enclosure, or FSIPE, cover into place on the Orbital Replac…
KSC-08pd2360
CAPE CANAVERAL, Fla. –  An overhead crane in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center lowers the Fine Guidance Sensor, or FGS, onto the Orbital Replacement Unit Carrier or ORUC, below for installation.  An FGS…
KSC-08pd2353
CAPE CANAVERAL, Fla. –   In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, an overhead crane moves the Fine Guidance Sensor Scientific Instrument Protective Enclosure, or FSIPE, cover  to be installed on the Orbita…
KSC-08pd2356
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, the Multi-Use Lightweight Equipment, or MULE, carrier is lowered toward the payload canister where it will be installed. The MULE…
KSC-2009-2707
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida,  an overhead crane is used to lift the Flight Support System, or FSS, carrier with the Soft Capture Mechanism from the workstand.…
KSC-2009-2720
CAPE CANAVERAL, Fla. -   In the Payload Changeout Room on Launch Pad 39A at NASA's Kennedy Space Center in Florida, the payload for the STS-125 mission is ready to be moved into space shuttle Atlantis’ payload bay. STS-125 is the fifth and…
KSC-08pd2952
CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Mission Specialists Michael Good, Mike Massimino and Andrew Feustel discuss the tiles they are looking at on the underside of space shuttle At…
KSC-08pd1936
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, the Multi-Use Lightweight Equipment, or MULE, carrier is lowered into the payload canister where it will be installed. The MULE co…
KSC-2009-2708
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, the Multi-Use Lightweight Equipment, or MULE, carrier is moved toward the payload canister where it will be installed. The MULE co…
KSC-2009-2706
CAPE CANAVERAL, Fla. -   In the Payload Changeout Room on Launch Pad 39A at NASA's Kennedy Space Center in Florida, a worker uses the payload ground handling mechanism to install the payload for the STS-125 mission into space shuttle Atlant…
KSC-08pd2955
CAPE CANAVERAL, Fla. –  In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Pilot Gregory C. Johnson stands underneath space shuttle Atlantis during the crew equipment interface test.  The CEIT provides hands-on exper…
KSC-08pd1932
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, the Flight Support System, or FSS, carrier with the Soft Capture Mechanism is moved toward the payload canister. The canister will…
KSC-2009-2683
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Atlantis' payload bay is filled with hardware for the STS-125 mission to service NASA's Hubble Space Telescope. From the bottom are the Flight…
KSC-2009-2980
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Atlantis' payload bay is filled with hardware for the STS-125 mission to service NASA's Hubble Space Telescope.  At the bottom is the Flight S…
KSC-2009-2983
CAPE CANAVERAL, Fla. –  Technicians in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center help guide a specialized overhead crane toward the Fine Guidance Sensor, or FGS. The sensor will be lifted and moved to the Orbit…
KSC-08pd2346
CAPE CANAVERAL, Fla. –    Technicians in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center check the Fine Guidance Sensor, or FGS, as it is lifted from its stand.  The sensor will be moved to the Orbital Replacement Un…
KSC-08pd2349
CAPE CANAVERAL, Fla. –   In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, the Fine Guidance Sensor Scientific Instrument Protective Enclosure, or FSIPE, cover awaits a move to be installed on the Orbital Replaceme…
KSC-08pd2354
CAPE CANAVERAL, Fla. –  In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, an overhead crane lowers the Fine Guidance Sensor Scientific Instrument Protective Enclosure, or FSIPE, cover alongside the Orbital Replacem…
KSC-08pd2357
CAPE CANAVERAL, Fla. –   In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, workers help maneuver the Fine Guidance Sensor Scientific Instrument Protective Enclosure, or FSIPE, cover alongside the Orbital Replacemen…
KSC-08pd2359
CAPE CANAVERAL, Fla. –  Technicians in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center help guide the Fine Guidance Sensor, or FGS, as it is lifted over the crossbar of the stand at right.  The sensor will be install…
KSC-08pd2351
CAPE CANAVERAL, Fla. –   Technicians in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center help guide the Fine Guidance Sensor, or FGS, as it moves toward the Orbital Replacement Unit Carrier or ORUC, for installation.…
KSC-08pd2350
CAPE CANAVERAL, Fla. –  In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Mission Specialists Mike Massimino, Megan McArthur and Andrew Feustel stand underneath space shuttle Atlantis during the crew equipment inter…
KSC-08pd1933
CAPE CANAVERAL, Fla. –  In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Mission Specialist Andrew Feustel practices using one of the cameras for the mission.  The crew is at Kennedy for a crew equipment interface…
KSC-08pd1945
CAPE CANAVERAL, Fla. –  In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Mission Specialist John Grunsfeld takes hold of one of the cameras to be used on the mission. Behind him are Mission Specialists Mike Good (l…
KSC-08pd1943
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida,  an overhead crane lowers the Flight Support System, or FSS, carrier with the Soft Capture Mechanism into the payload canister. Th…
KSC-2009-2723
CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Commander Scott Altman looks at a piece of equipment.  On either side are Mission Specialists Mike Massimino (left) and Andrew Feustel. Crew m…
KSC-08pd1935