CAPE CANAVERAL, Fla. – Workers accompany space shuttle Endeavour as it rolls toward the Vehicle Assembly Building at NASA's Kennedy Space Center.  The shuttle left Orbiter Processing Facility 2 with first motion at 7:01 am. EDT. In the VAB,…
KSC-08pd2601
CAPE CANAVERAL, Fla. – Space shuttle Endeavour rolls out of Orbiter Processing Facility 2 to head to the Vehicle Assembly Building at NASA's Kennedy Space Center. First motion was 7:01 a.m. EDT. In the VAB, Endeavour will be attached to its…
KSC-08pd2598
CAPE CANAVERAL, Fla. –  After a short journey from Orbiter Processing Facility 2, space shuttle Endeavour arrives in the transfer aisle of the Vehicle Assembly Building at NASA's Kennedy Space Center.  In the VAB, Endeavour will be attached…
KSC-08pd2605
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility 2 at NASA's Kennedy Space Center, United Space Alliance technicians inspect a reinforced carbon-carbon panel on Endeavour's wing leading edge using thermography to detect structural…
KSC-08pd2057
CAPE CANAVERAL, Fla. – After rolling out of Orbiter Processing Facility 2, space shuttle Endeavour turns toward the Vehicle Assembly Building at NASA's Kennedy Space Center. In the VAB, Endeavour will be attached to its external fuel tank a…
KSC-08pd2603
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 1 at NASA's Kennedy Space Center, a worker from United Space Alliance prepares to close the payload bay doors on space shuttle Atlantis. The payload bay has been thoroughly cleaned and i…
KSC-08pd2121
CAPE CANAVERAL, Fla. – Moved by the orbiter transporter, space shuttle Endeavour turns away from Orbiter Processing Facility 2 after rolling out to head to the Vehicle Assembly Building at NASA's Kennedy Space Center. First motion was 7:01…
KSC-08pd2599
CAPE CANAVERAL, Fla. – Workers accompany space shuttle Endeavour as it rolls toward the Vehicle Assembly Building at NASA's Kennedy Space Center.  The shuttle left Orbiter Processing Facility 2 with first motion at 7:01 am. EDT.  In the VAB…
KSC-08pd2600
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left are Mission Specialists Shane Kimb…
KSC-08pd2238
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left in the blue flight suits are Missi…
KSC-08pd2240
KENNEDY SPACE CENTER, FLA. --  The right-hand orbital maneuvering system pod is driven past the Vehicle Assembly Building on its way to Orbiter Processing Facility bay 2 for installation on the orbiter Endeavour.  The orbital maneuvering sy…
KSC-07pd0159
CAPE CANAVERAL, Fla. –   After a short journey from Orbiter Processing Facility 2, space shuttle Endeavour is parked in the transfer aisle of the Vehicle Assembly Building at NASA's Kennedy Space Center. In the VAB, Endeavour will be attach…
KSC-08pd2606
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  Here, Pilot Eric Boe, left, and Internationa…
KSC-08pd2228
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility 2 at NASA's Kennedy Space Center, United Space Alliance technicians inspect a reinforced carbon-carbon panel on Endeavour's wing leading edge using thermography to detect structural…
KSC-08pd2056
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left in the blue flight suits are Missi…
KSC-08pd2229
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  Shown here is Mission Specialist Shane Kimbr…
KSC-08pd2230
KENNEDY SPACE CENTER, FLA. -   The waters of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center, attract coots, ducks, herons and other water birds as shown here. Coots are readily identified by t…
KSC00PP-0237
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  Here, Mission Specialist Shane Kimbrough exa…
KSC-08pd2227
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left in the blue flight suits are Inter…
KSC-08pd2225
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left in the blue flight suits are Missi…
KSC-08pd2226
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left in the blue flight suits are Missi…
KSC-08pd2234
CAPE CANAVERAL, Fla. – After rolling out of Orbiter Processing Facility 2, space shuttle Endeavour begins the turn toward the Vehicle Assembly Building at NASA's Kennedy Space Center.  In the VAB, Endeavour will be attached to its external…
KSC-08pd2602
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 1 at NASA's Kennedy Space Center, a worker from United Space Alliance supervises the closure of the payload bay doors on space shuttle Atlantis. The payload bay has been thoroughly clean…
KSC-08pd2124
KENNEDY SPACE CENTER, FLA. -   Carmen Prater, with United Space Alliance, works on the flight deck of the orbiter Endeavour in bay 2 of the Orbiter Processing Facility.  She wears a “bunny suit,” clean room attire required for anyone coming…
KSC-05pd2295
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left in the blue flight suits are Missi…
KSC-08pd2237
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  Shown here is Mission Specialist Steve Bowen…
KSC-08pd2233
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  Here, Mission Specialist Heidemarie Stefanys…
KSC-08pd2242
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left are Mission Specialists Steve Bowe…
KSC-08pd2239
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 1 at NASA's Kennedy Space Center, space shuttle Atlantis' payload bay has been thoroughly cleaned and is ready to receive the carriers transporting the instruments and equipment needed t…
KSC-08pd2120
KENNEDY SPACE CENTER, FLA. -   Carmen Prater, with United Space Alliance, cleans a screen on the flight deck of the orbiter Endeavour in bay 2 of the Orbiter Processing Facility.  She wears a “bunny suit,” clean room attire required for any…
KSC-05pd2296
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 1 at NASA's Kennedy Space Center, preparations are under way to close the payload bay doors on space shuttle Atlantis. The payload bay has been thoroughly cleaned and is ready to receive…
KSC-08pd2123
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left are Mission Specialist Donald Pett…
KSC-08pd2241
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center, astronaut Charles Hobaugh, hands folded, conducts a fit check of the robotic workstation, or RWS, in the International Space Station's Cupola mo…
KSC-08pd2194
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left are Mission Specialists Heidemarie…
KSC-08pd2232
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 1 at NASA's Kennedy Space Center, space shuttle Atlantis' payload bay has been thoroughly cleaned and is ready to receive the carriers transporting the instruments and equipment needed t…
KSC-08pd2122
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left in the blue flight suits are Pilot…
KSC-08pd2231
KENNEDY SPACE CENTER, FLA. -   The waters of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center, attract coots, ducks, herons and other water birds as shown here. Coots are readily identified by t…
KSC-00PP-0237
KENNEDY SPACE CENTER, FLA. -   In bay 2 of the Orbiter Processing Facility, workers are installing the Multifunction Electronic Display Subsystem  - a state-of-the-art “glass cockpit” - on the orbiter Endeavour.  The “bunny suits” they are…
KSC-05pd2294
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 1 at NASA's Kennedy Space Center, the payload bay doors on space shuttle Atlantis are nearly closed. The payload bay has been thoroughly cleaned and is ready to receive the carriers tran…
KSC-08pd2125
CAPE CANAVERAL, Fla. – Space shuttle Endeavour begins rolling out of Orbiter Processing Facility 2 to head to the Vehicle Assembly Building at NASA's Kennedy Space Center. First motion was 7:01 a.m. EDT.  In the VAB, Endeavour will be attac…
KSC-08pd2597
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility 2 at NASA's Kennedy Space Center, a United Space Alliance technician inspects the reinforced carbon-carbon, or RCC, panels on Endeavour's wing leading edge using thermography to dete…
KSC-08pd2055
CAPE CANAVERAL, Fla. – Space shuttle Endeavour is ready to roll out of Orbiter Processing Facility 2 and head to the Vehicle Assembly Building at NASA's Kennedy Space Center. First motion was 7:01 a.m. EDT.  In the VAB, Endeavour will be at…
KSC-08pd2596
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  Here, Commander Chris Ferguson examines the…
KSC-08pd2235
CAPE CANAVERAL, Fla. –  After rolling out of Orbiter Processing Facility 2, space shuttle Endeavour rolls through the open doors of the Vehicle Assembly Building at NASA's Kennedy Space Center. In the VAB, Endeavour will be attached to its…
KSC-08pd2604
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility 2 at NASA's Kennedy Space Center, United Space Alliance technicians inspect the reinforced carbon-carbon, or RCC, panels on Endeavour's wing leading edge using thermography to detect…
KSC-08pd2054
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, members of space shuttle Endeavour's STS-126 crew participate in a crew equipment interface test, or CEIT.  From left in the blue flight suits are Comma…
KSC-08pd2236
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 1 at NASA's Kennedy Space Center, a worker from United Space Alliance gives the signal that the payload bay doors on space shuttle Atlantis are closed. The payload bay has been thoroughl…
KSC-08pd2126
KENNEDY SPACE CENTER, FLA. --  The right-hand orbital maneuvering system pod is being delivered to Orbiter Processing Facility bay 2 for installation on the orbiter Endeavour.  The orbital maneuvering system/reaction control system left- an…
KSC-07pd0158