This image of a model capture magnet was taken after an experiment in a Mars simulation chamber at the University of Aarhus, Denmark. It has some dust on it, but not as much as that on the Mars Exploration Rover Spirit capture magnet.
Testing the Capture Magnet
This image taken at NASA Jet Propulsion Laboratory shows a rover test drive up a manmade slope.
The Little Rover that Could
A screen shot from software used by the Mars Exploration Rover team for assessing movements by Spirit and Opportunity illustrates the degree to which Spirit wheels have become embedded in soft material at the location called Troy.
Computer Reconstruction of Spirit Predicament
This image shows the deflated airbags retracted underneath the lander petal at the JPL In-Situ Instrument Laboratory.
JPL Testbed Image of Airbag Retraction
This image shows a test rover in a near-final turned position on the lander in NASA Jet Propulsion Laboratory In-Situ Instruments Laboratory, or testbed.
95-degree Position at JPL Testbed
JPL engineers hand-deploying the solar arrays that provide the electrical power on NASA Mars Exploration Rover 1.
Rover 1 Solar Arrays
NASA Mars Exploration Rover team members prepare a testing setup for a subsequent experiment after an experiment driving the rover in a crablike motion, with all four corner wheels angled to the right.
After a Crabwalk Test
NASA Rover 1 in the cruise configuration in Jet Propulsion Laboratory 25-ft Solar Thermal Vacuum Chamber where it underwent environmental testing.
Environmental Testing
This image, taken in the JPL In-Situ Instruments Laboratory or Testbed, shows the view from the front hazard avoidance cameras on the Mars Exploration Rover Spirit after the rover has backed up and turned 45 degrees counterclockwise.
Turning in the Testbed
This image shows the airbags in deflated position at the JPL In-Situ Instrument Laboratory, where engineers tested the airbags to ensure a safe landing on Mars.
JPL Testbed Image of Deflated Airbag
Footage taken at the JPL In-Situ Instruments Laboratory, or testbed, shows engineers practicing the deployment of the test rover robotic arm.
Spirit Reaches Out at JPL
This image taken at NASA Jet Propulsion Laboratory shows the Moessbauer spectrometer, an instrument on NASA Mars Exploration Rover Spirit that detects iron-bearing minerals in martian rocks and soil.
Powerful Yet Tiny Machine
Bearing a striking resemblance to a cluster of paper lanterns, these inflated airbags show a pattern of seams exactly like those left in the martian soil by the Mars Exploration Rover Opportunity during landing at Meridiani Planum, Mars.
Tracks Seam Like Airbags
This scene from NASA Kennedy Space Center in April 2003 shows work during final processing of the spacecraft then known as NASA Mars Exploration Rover B and later named Opportunity.
One Year Before Mission Success
Airbags are fully inflated in this photograph taken at the JPL In-Situ Instrument Laboratory or Testbed, where engineers simulated the orientation of the airbags during the deflation process.
JPL Testbed Image of Inflated Airbags
Rover team members Kim Lichtenberg left and Mike Seibert fill a mixer with powdered clay and diatomaceous earth, a combination found to offer physical properties similar to the soil where NASA rover Spirit is embedded on Mars.
Preparing a Test Mixture
NASA Mars Exploration Rover team members continued longer-duration test runs this week, driving the test rover forward and uphill in a crab-like position. These long-duration drives will continue through the end of next week.
Uphill Climb
This image taken at JPL shows engineers testing the route by which the Mars Exploration Rover Opportunity will roll off its lander. Opportunity touched down at Meridiani Planum, Mars on Jan. 24, 9:05 p.m. PST, 2004, Earth-received time.
Engineers Test Roll-Off at JPL
NASA Rover 2 equipment deck, with solar arrays partially deployed, in NASA JPL Spacecraft Assembly Facility cleanroom.
Rover 2 Assembly
Rover-team members at NASA Jet Propulsion Laboratory, Pasadena, Calif., check slight movements by a test rover during tests simulating the challenge of getting NASA Mars Exploration Rover Spirit out of a sand trap on Mars.
Sandbox Testing to Prepare for Driving Spirit
While a test rover rolls off a plywood surface into a prepared bed of soft soil, rover team members Colette Lohr left and Kim Lichtenberg center  eye the wheels digging into the soil and Paolo Bellutta enters the next  driving command.
Test Rover Sinks into Prepared Soil
One of two Mars Exploration Rovers sits inside its cruise stage waiting to undergo environmental testing at NASA Jet Propulsion Laboratory.
Mars Exploration Rover Makes Progress
High Bay 1 looks much as it does today in this photo of NASA's Spirit and Opportunity Mars rovers being tested on Feb. 10, 2003. Some workers are wearing booties and others wear shoes that were stored in the gowning area and cleaned regular…
Spirit and Opportunity in High Bay 1
Rover engineers prepare a mixture of sandy and powdery materials to simulate some difficult Mars driving conditions inside a facility at NASA Jet Propulsion Laboratory, Pasadena, Calif.
Preparing to Test Rover Mobility
With a slope of about 10 degrees and a pointy rock under the test rover belly, this sandbox setup at NASA JPL, is ready for engineers to use the test rover to assess possible moves for getting Mars rover Spirit out of a patch of loose Marti…
Test Setup for Effort to Free Spirit
Rover engineers check how a test rover moves in material chosen to simulate some difficult Mars driving conditions. The scene is inside the In-Situ Instrument Laboratory at NASA Jet Propulsion Laboratory, Pasadena, Calif.
Tests to Help Plan Opportunity Moves
NASA Mars Exploration Rover parachute deployment testing in the world largest wind tunnel at NASA Ames Research Center, Moffet Field, Calif.
Parachute Test
Footage from the JPL In-Situ Instruments Laboratory, or testbed, shows engineers rehearsing a crucial maneuver called egress in which NASA Mars Exploration Rover Spirit rolls off its lander platform and touches martian soil.
Rover Rehearses Roll-Off at JPL
NASA Rover 1 sits atop the deployed lander with its solar arrays and wheels stowed.
Rover 1 and Lander
Members of the Mars Exploration Rovers Assembly, Test and Launch Operations team gather around NASA Rover 2 and its predecessor, a flight spare of the Pathfinder mission Sojourner rover, named Marie Curie.
Rover Family Photo
JPL engineers making adjustments to NASA Mars Exploration Rover 1.
Adjustments to Rover 1
Opportunity View of Viking Crater, Sol 421
Opportunity View of Viking Crater, Sol 421
NASA Rover 2 is driven over staggered ramps to test the suspension range of motion.
Rover 2 Driving Test
This image shows a test rover as it attempts a complete 115-degree turn on the lander in NASA Jet Propulsion Laboratory in-Situ Instruments Laboratory, or testbed.
Roll-Off Dress Rehearsal at JPL
JPL engineers examine the robotic arm of NASA Mars Exploration Rover 1.
Robotic Arm of Rover 1
This image taken at NASA Jet Propulsion Laboratory shows the panoramic camera used onboard both NASA Mars Exploration Rovers.
Multihued Mars
Rover team members Kim Lichtenberg and Joseph Carsten watch motions of a test rover at NASA Jet Propulsion Laboratory, Pasadena, Calif., as the rover carries out commands for driving forward with an arc toward the right.
Observing a Rover Pivot Test
This close-up image of a penny shows the degree to which the microscopic imager on NASA Mars Exploration Rover Spirit can zoom in on a target.
Penny for Your Reference
In this view from behind a test rover at NASA Jet Propulsion Laboratory, Pasadena, Calif., the rear wheels of the rover are turned toward the left, and the left-front wheel is turned toward the the right.
Preparing for Rover Pivot Test
NASA Rover 1 sits atop the deployed lander with its solar arrays and wheels stowed.
Rover 1 in Cruise Stage
A Martian mechanic checks beneath the completely deployed NASA Rover 1 lander. Atop the lander is Rover 1 with its wheels and solar arrays in the stowed position.
Rover 1 and Lander
Mars Exploration Rover team members on July 21, 2009, tested how altering the order in which individual wheels turn for steering affects how those turns dig the wheels deeper into soft soil. From left: Alfonso Herrera, Vandana Verma, Bruce…
Testing Sequences of Wheel Turns
An artist concept portrays a NASA Mars Exploration Rover on the surface of Mars. Two rovers were launched in 2003 and arrived at sites on Mars in January 2004.
Artist Concept of Rover on Mars
Mike Seibert and Sharon Laubach, engineers on NASA Mars Exploration Rover team at the Jet Propulsion Laboratory, Pasadena, check the exact position of a test rover in preparation for the next test of a possible maneuver for Spirit to use on…
Preparing for Next Test
Rover team members Mike Seibert left and Paolo Bellutta add a barrowful of soil mixture to the sloped box where a test rover will be used for assessing possible maneuvers for NASA rover Spirit to use in escaping from a sandtrap on Mars.
Filling the Simulated Sandtrap
This image taken at NASA Jet Propulsion Laboratory shows engineers testing the rover stand-up motions. The rover is in an elevated pose, preparing to fold down its wheels, descend and stand up.
Spirit Rises at JPL
Stars in the upper portion of the constellation Orion the Hunter, including the bright shoulder star Betelgeuse and Orion three-star belt, appear in this image taken from the surface of Mars by the panoramic camera on NASA rover Spirit.  Sp…
Stars in Orion as Seen from Mars
Testing at NASA Jet Propulsion Laboratory in August 2009 is assessing possible maneuvers that the Mars rover Spirit might use for escaping from a patch of soft soil where it is embedded at a Martian site called Troy.
Second Test Rover Added for Free Spirit Tests