CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5579
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5584
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5589
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5581
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Pilot Gregory H. Johnson checks space shuttle Endeavour's payload bay for sharp edges that could affect his work in space. The six S…
KSC-2010-5573
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5586
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the tip-top of the bright-orange external fuel tank is where workers will prepare to begin removing the quick disconnect from the ground umbilical carrier…
KSC-2010-5564
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, technicians prepare to move the STS-133 payload from the rotating service structure on Launch Pad 39A to space shuttle Discovery's payload bay. The move paves the way for th…
KSC-2010-5042
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the vent line is detached from the ground umbilical carrier plate (GUCP) on the bright-orange external fuel tank.  Next, the GUCP's 7-inch quick disconnect…
KSC-2010-5598
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a left-side main separation bolt attaches the bottom of space shuttle Discovery to its external fuel tank in the Vehicle Assembly Building. As technicians were attaching the…
KSC-2010-4648
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a dexterous humanoid astronaut helper, known as Robonaut, demonstrates its talents to media. Robonaut 2 (R2) will be delivered to the International Space Station on space sh…
KSC-2010-5425
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Mission Specialist Roberto Vittori with the European Space Agency, left, Commander Mark Kelly and Pilot Gregory H. Johnson check…
KSC-2010-5551
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the tip-top of the bright-orange external fuel tank is where workers will prepare to begin removing the quick disconnect from the ground umbilical carrier…
KSC-2010-5560
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check out space shuttle Endeavour's payload bay. The six STS-134 astronauts are participating in the Cr…
KSC-2010-5599
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Mission Specialist Michael Finke checks space shuttle Endeavour's payload bay for sharp edges that could affect his work in space. T…
KSC-2010-5587
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5574
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5583
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5585
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Mission Specialist Roberto Vittori with the European Space Agency, his crewmates and technicians check space shuttle Endeavour's pay…
KSC-2010-5575
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check out space shuttle Endeavour's payload bay. The six STS-134 astronauts are participating in the Cr…
KSC-2010-5602
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5588
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, a worker prepares to remove the ground umbilical carrier plate's (GUCP) 7-inch quick disconnect. A hydrogen gas leak at that location on the external fuel…
KSC-2010-5609
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the tip-top of the bright-orange external fuel tank is where workers will prepare to begin removing the quick disconnect from the ground umbilical carrier…
KSC-2010-5562
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Commander Mark Kelly, left, and Mission Specialist Roberto Vittori with the European Space Agency check out a tool they'll be us…
KSC-2010-5544
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, workers prepare to begin removing the quick disconnect from the ground umbilical carrier plate (GUCP) on space shuttle Discovery's external fuel tank. A hy…
KSC-2010-5565
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, workers take photos of the ground umbilical carrier plate's (GUCP) 7-inch quick disconnect, which has been removed from the external fuel tank. A hydrogen…
KSC-2010-5616
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, technicians prepare to move the STS-133 payload from the rotating service structure on Launch Pad 39A to space shuttle Discovery's payload bay. The move paves the way for th…
KSC-2010-5043
CAPE CANAVERAL, Fla. -- Inside the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the hatch of the Permanent Multipurpose Module (PMM) is closed in preparation for space shuttle Discovery's STS-133 mission to t…
KSC-2010-4784
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a Vehicle Assembly Building technician adjusts a left-side main separation bolt that attaches the bottom of space shuttle Discovery to its external fuel tank. As technicians…
KSC-2010-4647
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Mission Specialists Greg Chamitoff, left, Michael Finke and Andrew Feustel check out the camera they'll be snapping photos with…
KSC-2010-5541
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 crew members check out the tools and equipment they'll be using in space. Space shuttle Endeavour's six astronauts are participa…
KSC-2010-5605
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 crew members check out the tools and equipment they'll be using in space. Space shuttle Endeavour's six astronauts are participa…
KSC-2010-5603
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5582
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5580
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check out space shuttle Endeavour's payload bay. The six STS-134 astronauts are participating in the Cr…
KSC-2010-5600
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5577
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 crew members hang out under the spacecraft that will take them to the International Space Station, space shuttle Endeavour. The…
KSC-2010-5604
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check space shuttle Endeavour's payload bay for sharp edges that could affect the astronauts' work in space…
KSC-2010-5578
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 crew members check space shuttle Endeavour's payload bay for sharp edges that could affect the their work in space. Seen here, from…
KSC-2010-5576
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check out space shuttle Endeavour's payload bay. The six STS-134 astronauts are participating in the Cr…
KSC-2010-5601
CAPE CANAVERAL, Fla. -- As the sun begins to rise over Launch Pad 39A at NASA's Kennedy Space Center in Florida, preparations to remove the ground umbilical carrier plate's (GUCP) 7-inch quick disconnect are under way. A hydrogen gas leak a…
KSC-2010-5606
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, workers prepare to remove the ground umbilical carrier plate's (GUCP) 7-inch quick disconnect. A hydrogen gas leak at that location on the external fuel ta…
KSC-2010-5608
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the tip-top of the bright-orange external fuel tank is where workers will prepare to begin removing the quick disconnect from the ground umbilical carrier…
KSC-2010-5559
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, workers begin to remove the vent line attached to the ground umbilical carrier plate (GUCP) on the bright-orange external fuel tank. Next, the GUCP's 7-inc…
KSC-2010-5594
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, a worker examines the foam insulation on space shuttle Discovery's external fuel tank. Two cracks on a section of the tank’s metal exterior were found on o…
KSC-2010-5618
CAPE CANAVERAL, Fla. -- Inside the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the hatch of the Permanent Multipurpose Module (PMM) is closed in preparation for space shuttle Discovery's STS-133 mission to t…
KSC-2010-4781
CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew checks out the heat shield tiles that protect space shuttles during re-entry. From left, are Mission Specialists Greg C…
KSC-2010-5539
CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the vent line is detached from the ground umbilical carrier plate (GUCP) on the bright-orange external fuel tank. Next, the GUCP's 7-inch quick disconnect…
KSC-2010-5597