CAPE CANAVERAL, Fla. –  In the Rotation, Processing, and Surge Facility at NASA's Kennedy Space Center in Florida, the Ares I-X aft skirt is mated to the aft segment (at right).  At left is a stack of segments of a solid rocket booster for…
KSC-2009-3694
CAPE CANAVERAL, Fla. – Roger Elliot, with United Space Alliance, speaks to employees before the move of the Ares I-X aft skirt from the Assembly and Refurbishment Facility at NASA's Kennedy Space Center to the Rotation, Processing and Surge…
KSC-2009-3581
CAPE CANAVERAL, Fla. – The Ares I-X aft skirt is moved from the Assembly and Refurbishment Facility at NASA's Kennedy Space Center to the Rotation, Processing and Surge Facility. The aft skirt underwent modifications in the ARF. In the RSPF…
KSC-2009-3585
CAPE CANAVERAL, Fla. – Joe Oliva, with ATK, speaks to employees before the move of the Ares I-X aft skirt from the Assembly and Refurbishment Facility at NASA's Kennedy Space Center to the Rotation, Processing and Surge Facility. The aft sk…
KSC-2009-3582
CAPE CANAVERAL, Fla. –   In Vehicle Assembly Building high bay 4, cables from an overhead crane lower ballast into segment 7 for the Ares I-X  rocket. These ballast assemblies are being installed in the upper stage segments 1 and 7 and will…
KSC-2009-1394
CAPE CANAVERAL, Fla. –   In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, a ballast assembly is lifted toward the Ares I-X segments for installation. These ballast assemblies will be installed in the…
KSC-2009-1211
CAPE CANAVERAL, Fla. – The Ares I-X fifth segment simulator aft section is lowered onto a stand in the Vehicle Assembly Building's extended duration orbiter lab, or EDO, at NASA's Kennedy Space Center in Florida.  Ares I-X is the test vehic…
KSC-2009-1671
CAPE CANAVERAL, Fla. – A C-5 aircraft arrives at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida carrying hardware that will be used in the launch of the Ares I-X rocket. The hardware consists of a precisely machined,…
KSC-2009-1399
CAPE CANAVERAL, Fla. –– In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, at left center, technicians install the roll control system in the Ares I-X segment in the center.  Ares I-X is the test vehic…
KSC-2009-2741
CAPE CANAVERAL, Fla. –  Technicians stand by as the Ares I-X motor segment is moved toward a work stand in the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida. Four segments were delivered to Kennedy for fi…
KSC-2009-2335
CAPE CANAVERAL, Fla. –    In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, this platform is being removed from high bay 3 as part of the refurbishment of the facility for the Constellation Program's Ares 1-X vehic…
KSC-2009-1350
CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center in Florida, STS-129 Commander Charles O. Hobaugh prepares to practice driving an M113 armored personnel carrier.    The M113 is kept at the foot of the launch pad in case an emergency eg…
KSC-2009-5552
CAPE CANAVERAL, Fla. – Standing tall, the Ares I-X rocket rides atop the crawler-transporter as it moves beyond the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. Its slow trek to Launch Pad 39B, known as "rollout," be…
KSC-2009-5531
CAPE CANAVERAL, Fla.  –  In the Assembly and Refurbishment Facility at NASA's Kennedy Space Center, the aft skirt for the Ares 1-X rocket has been lowered onto another stand. The segment is being moved onto a machine shop work stand for dri…
KSC-08pd1862
CAPE CANAVERAL, Fla. –– In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, technicians are seen inside the Ares I-X segment installing the roll control system. Ares I-X is the test vehicle for the Ares…
KSC-2009-2742
CAPE CANAVERAL, Fla. –   Inside the Assembly and Refurbishment Facility, or ARF, at NASA's Kennedy Space Center in Florida, workers begin removing the protective cover from around the Ares I-X forward skirt. The forward skirt is the initial…
KSC-2009-1310
CAPE CANAVERAL, Fla. –  In the Rotation, Processing, and  Surge Facility at NASA's Kennedy Space Center in Florida, the Ares I-X aft skirt is mated to the aft segment.  The complete Ares I-X will be assembled in the Vehicle Assembly Buildin…
KSC-2009-3690
CAPE CANAVERAL, Fla. –  In the Rotation, Processing, and  Surge Facility at NASA's Kennedy Space Center in Florida, the Ares I-X aft skirt is mated to the aft segment. The complete Ares I-X will be assembled in the Vehicle Assembly Building…
KSC-2009-3691
CAPE CANAVERAL, Fla. – The Ares I-X aft skirt moves toward the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida.  In the RPSF, the aft skirt will be stacked with the aft motor to form the aft assembly.  The…
KSC-2009-3588
CAPE CANAVERAL, Fla. – The Ares I-X aft skirt moves past the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida on its way to the Rotation, Processing and Surge Facility.  In the RPSF, it will be stacked with the aft motor…
KSC-2009-3587
CAPE CANAVERAL, Fla. – The Ares I-X aft skirt is ready to be moved from the Assembly and Refurbishment Facility at NASA's Kennedy Space Center to the Rotation, Processing and Surge Facility. The aft skirt underwent modifications in the ARF.…
KSC-2009-3579
KENNEDY SPACE CENTER, FLA. --  In the hypergolic maintenance facility at NASA's Kennedy Space Center, a technician adjusts equipment during testing of the Ares I-X Roll Control System, or RoCS.  The RoCS Servicing Simulation Test is to gath…
KSC-08pd0091
CAPE CANAVERAL, Fla. –  At NASA's Kennedy Space Center in Florida, the Ares I-X forward assembly comprising the frustum, forward skirt extension and forward skirt heads for the Vehicle Assembly Building, in the background.  In the VAB's Hig…
KSC-2009-3676
CAPE CANAVERAL, Fla. –  The Ares I-X fifth segment simulator assembly is lowered onto a stand in the Vehicle Assembly Building's transfer aisle at NASA's Kennedy Space Center in Florida. The assembly will later be lifted into the VAB's High…
KSC-2009-3734
CAPE CANAVERAL, Fla. –  In the Vehicle Assembly Building's transfer aisle at NASA's Kennedy Space Center in Florida, a crane lowers the Ares I-X forward assembly onto a stand in preparation for being moved into High Bay 4. Ares I-X is the f…
KSC-2009-3705
CAPE CANAVERAL, Fla. –  Ares I-X segments and stacks are filling the floor of the Vehicle Assembly Building's High Bay 4 at NASA's Kennedy Space Center in Florida.  At left in the background is the crew module-launch abort system, or CM-LAS…
KSC-2009-3708
CAPE CANAVERAL, Fla. - The towering 327-foot-tall Ares I-X rocket, brightly lit against the night sky, rides aboard a crawler-transporter for the 4.2-mile trip to Launch Pad 39B at NASA's Kennedy Space Center in Florida. The rocket is bolte…
KSC-2009-5538
CAPE CANAVERAL, Fla. –– In High Bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida,  technicians maneuver a second roll control system module into place for installation in the Ares I-X segment. Ares I-X is the…
KSC-2009-2898
CAPE CANAVERAL, Fla. –   In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, this platform is lifted from an upper level in high bay 3.  Its removal is part of the refurbishment of the facility for the Constellation…
KSC-2009-1351
CAPE CANAVERAL, Fla. – The Ares I-X fifth segment simulator aft section arrives in the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida.  Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Pro…
KSC-2009-1668
CAPE CANAVERAL, Fla. – Spotlighted against the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the 327-foot-tall Ares I-X rocket begins its slow trek to Launch Pad 39B. The move, known as "rollout," began at 1:39 a.m. E…
KSC-2009-5529
CAPE CANAVERAL, Fla. –  In the Rotation, Processing, and Surge Facility at NASA's Kennedy Space Center in Florida, the Ares I-X aft skirt is mated to the aft segment. The complete Ares I-X will be assembled in the Vehicle Assembly Building.…
KSC-2009-3692
CAPE CANAVERAL, Fla. –  In the Rotation, Processing, and Surge Facility at NASA's Kennedy Space Center in Florida, the Ares I-X aft skirt is mated to the aft segment (at right).  At far left is a solid rocket booster stack for a shuttle.  T…
KSC-2009-3693
CAPE CANAVERAL, Fla. – Bob ESS, with NASA, speaks to employees before the move of the Ares I-X aft skirt from the Assembly and Refurbishment Facility at NASA's Kennedy Space Center to the Rotation, Processing and Surge Facility. The aft ski…
KSC-2009-3583
CAPE CANAVERAL, Fla. – The Ares I-X aft skirt moves past the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida on its way to the Rotation, Processing and Surge Facility.  In the RPSF, it will be stacked with the aft motor…
KSC-2009-3586
CAPE CANAVERAL, Fla. – Center Director Bob Cabana speaks to employees about the significance of moving the Ares I-X aft skirt from the Assembly and Refurbishment Facility at NASA's Kennedy Space Center to the Rotation, Processing and Surge…
KSC-2009-3584
CAPE CANAVERAL, Fla. – Employees gather to witness the move of the Ares I-X aft skirt from the Assembly and Refurbishment Facility at NASA's Kennedy Space Center to the Rotation, Processing and Surge Facility. The aft skirt underwent modifi…
KSC-2009-3580
CAPE CANAVERAL, Fla. – The Ares I-X aft skirt moves inside the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida.  In the RPSF, the aft skirt will be stacked with the aft motor to form the aft assembly.  The…
KSC-2009-3589
CAPE CANAVERAL, Fla. – The Ares I-X fifth segment simulator aft section heads for the open door of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida.  Ares I-X is the test vehicle for the Ares I, which is part of the C…
KSC-2009-1667
CAPE CANAVERAL, Fla. –– In High Bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, a second roll control system module is ready to be installed in an Ares I-X segment.  Ares I-X is the test vehicle for the Are…
KSC-2009-2893
CAPE CANAVERAL, Fla. –  In the transfer aisle of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, a crane is attached to the fifth segment simulator assembly for the Ares I-X.  The crane will lift and move the segmen…
KSC-2009-3709
CAPE CANAVERAL, Fla. –   In Vehicle Assembly Building high bay 4, cables from an overhead crane lower ballast into segment 7 for the Ares I-X  rocket. These ballast assemblies are being installed in the upper stage segments 1 and 7 and will…
KSC-2009-1393
CAPE CANAVERAL, Fla. –  In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the Ares I-X fifth segment simulator assembly (center right) joins other segments located in High Bay 4.  Ares I-X is the flight test vehicl…
KSC-2009-3739
CAPE CANAVERAL, Fla. - The towering 327-foot-tall Ares I-X rocket moves away from the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. The rocket's slow, 4.2-mile journey to Launch Pad 39B began at 1:39 a.m. EDT.    The…
KSC-2009-5549
CAPE CANAVERAL, Fla. –    At Astrotech in Titusville, Fla., the Ares I-X forward skirt, wrapped in a protective cover, is lifted by a crane for a move to a transporter.  The segment will be transferred to the Assembly and Refurbishment Faci…
KSC-2009-1303
CAPE CANAVERAL, Fla. –  A crane is being attached to the first of the Ares I-X motor segments to raise it for transfer it to a work stand in the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida. Four segment…
KSC-2009-2326
CAPE CANAVERAL, Fla. –   In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, this platform will be removed from high bay 3 as part of the refurbishment of the facility for the Constellation Program's Ares 1-X vehicle…
KSC-2009-1348
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, construction is under way on a new mobile launcher for the Constellation Program.  The new mobile launcher will be the base for the Ares rockets to launch the Orion crew expl…
KSC-2009-3876