KENNEDY SPACE CENTER, FLA. --  In the hypergolic maintenance facility at NASA's Kennedy Space Center, a technician adjusts equipment during testing of the Ares I-X Roll Control System, or RoCS.  The RoCS Servicing Simulation Test is to gath…
KSC-08pd0091
CAPE CANAVERAL, Fla. –   In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, a ballast assembly is lifted toward the Ares I-X segments for installation. These ballast assemblies will be installed in the…
KSC-2009-1211
CAPE CANAVERAL, Fla. – The Ares I-X fifth segment simulator aft section is lowered onto a stand in the Vehicle Assembly Building's extended duration orbiter lab, or EDO, at NASA's Kennedy Space Center in Florida.  Ares I-X is the test vehic…
KSC-2009-1671
CAPE CANAVERAL, Fla. – A C-5 aircraft arrives at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida carrying hardware that will be used in the launch of the Ares I-X rocket. The hardware consists of a precisely machined,…
KSC-2009-1399
CAPE CANAVERAL, Fla. –  Ares I-X segments and stacks are filling the floor of the Vehicle Assembly Building's High Bay 4 at NASA's Kennedy Space Center in Florida.  At left in the background is the crew module-launch abort system, or CM-LAS…
KSC-2009-3708
CAPE CANAVERAL, Fla. –    In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, this platform is being removed from high bay 3 as part of the refurbishment of the facility for the Constellation Program's Ares 1-X vehic…
KSC-2009-1350
CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center in Florida, STS-129 Commander Charles O. Hobaugh prepares to practice driving an M113 armored personnel carrier.    The M113 is kept at the foot of the launch pad in case an emergency eg…
KSC-2009-5552
CAPE CANAVERAL, Fla. – Standing tall, the Ares I-X rocket rides atop the crawler-transporter as it moves beyond the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. Its slow trek to Launch Pad 39B, known as "rollout," be…
KSC-2009-5531
CAPE CANAVERAL, Fla. –  A crane is being attached to the first of the Ares I-X motor segments to raise it for transfer it to a work stand in the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida. Four segment…
KSC-2009-2326
CAPE CANAVERAL, Fla. – The Ares I-X fifth segment simulator aft section arrives in the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida.  Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Pro…
KSC-2009-1668
CAPE CANAVERAL, Fla. – Spotlighted against the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the 327-foot-tall Ares I-X rocket begins its slow trek to Launch Pad 39B. The move, known as "rollout," began at 1:39 a.m. E…
KSC-2009-5529
CAPE CANAVERAL, Fla. –  In the Assembly and Refurbishment Facility at NASA's Kennedy Space Center in Florida, the Ares I-X forward assembly (comprising the frustum, forward skirt extension and forward skirt) is ready to be moved to the Vehi…
KSC-2009-3669
CAPE CANAVERAL, Fla. –– In High Bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida,  technicians complete installation of a second roll control system module in an Ares I-X segment.  Ares I-X is the test vehicl…
KSC-2009-2899
CAPE CANAVERAL, Fla. –  One of the Ares I-X roll control system modules is moved into place on the upper stage simulator for a fit check.  The hardware is in high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center. The sy…
KSC-2009-1535
CAPE CANAVERAL, Fla. –   In the Vehicle Assembly Building's high bay 3 at NASA's Kennedy Space Center in Florida, framework is lifted to the 16th floor for modifications related to the Ares I-X. The refurbishment of the facility is for the…
KSC-2009-1397
CAPE CANAVERAL, Fla. –  At NASA's Kennedy Space Center in Florida, the Ares I-X forward assembly comprising the frustum, forward skirt extension and forward skirt heads for the Vehicle Assembly Building, in the background.  In the VAB's Hig…
KSC-2009-3676
CAPE CANAVERAL, Fla. –  The Ares I-X fifth segment simulator assembly is lowered onto a stand in the Vehicle Assembly Building's transfer aisle at NASA's Kennedy Space Center in Florida. The assembly will later be lifted into the VAB's High…
KSC-2009-3734
CAPE CANAVERAL, Fla. –  In the Vehicle Assembly Building's transfer aisle at NASA's Kennedy Space Center in Florida, a crane lowers the Ares I-X forward assembly onto a stand in preparation for being moved into High Bay 4. Ares I-X is the f…
KSC-2009-3705
CAPE CANAVERAL, Fla. –– In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, at left center, technicians install the roll control system in the Ares I-X segment in the center.  Ares I-X is the test vehic…
KSC-2009-2741
CAPE CANAVERAL, Fla. –  Technicians stand by as the Ares I-X motor segment is moved toward a work stand in the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida. Four segments were delivered to Kennedy for fi…
KSC-2009-2335
CAPE CANAVERAL, Fla. - The towering 327-foot-tall Ares I-X rocket, brightly lit against the night sky, rides aboard a crawler-transporter for the 4.2-mile trip to Launch Pad 39B at NASA's Kennedy Space Center in Florida. The rocket is bolte…
KSC-2009-5538
CAPE CANAVERAL, Fla. –– In High Bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida,  technicians maneuver a second roll control system module into place for installation in the Ares I-X segment. Ares I-X is the…
KSC-2009-2898
CAPE CANAVERAL, Fla. –  In the Rotation, Processing, and Surge Facility at NASA's Kennedy Space Center in Florida, the Ares I-X aft skirt is mated to the aft segment (at right).  At left is a stack of segments of a solid rocket booster for…
KSC-2009-3694
CAPE CANAVERAL, Fla. –   In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, this platform will be removed from high bay 3 as part of the refurbishment of the facility for the Constellation Program's Ares 1-X vehicle…
KSC-2009-1348
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, construction is under way on a new mobile launcher for the Constellation Program.  The new mobile launcher will be the base for the Ares rockets to launch the Orion crew expl…
KSC-2009-3876
CAPE CANAVERAL, Fla. – In the mobile launcher parking area behind the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the new mobile launcher, or ML, for the Ares rockets is under  construction.  The ML will be the base…
KSC-2009-3140
CAPE CANAVERAL, Fla. – Spotlighted in brilliant white, the 327-foot-tall Ares I-X rocket emerges from the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. The move to the launch pad, known as "rollout," began at 1:39 a.m…
KSC-2009-5535
CAPE CANAVERAL, Fla. –  In the Rotation, Processing, and  Surge Facility at NASA's Kennedy Space Center in Florida, the Ares I-X aft skirt is mated to the aft segment.  The complete Ares I-X will be assembled in the Vehicle Assembly Buildin…
KSC-2009-3690
CAPE CANAVERAL, Fla. –  Cranes lift the first of the Ares I-X motor segments in order to raise it to vertical and transfer it to a work stand in the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida. Four seg…
KSC-2009-2330
CAPE CANAVERAL, Fla. – The 327-foot-tall Ares I-X rocket clears the door of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, on its way to Launch Pad 39B. The move to the launch pad, known as "rollout," began at 1:39…
KSC-2009-5536
CAPE CANAVERAL, Fla. –   Inside the Assembly and Refurbishment Facility, or ARF, at NASA's Kennedy Space Center in Florida, workers lift the padding away from the Ares I-X forward skirt transferred from the Astrotech facility in Titusville,…
KSC-2009-1309
CAPE CANAVERAL, Fla. –   In Vehicle Assembly Building high bay 4, cables from an overhead crane lower ballast into segment 7 for the Ares I-X  rocket. These ballast assemblies are being installed in the upper stage segments 1 and 7 and will…
KSC-2009-1394
CAPE CANAVERAL, Fla. – The Ares I-X fifth segment simulator aft section heads for the open door of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida.  Ares I-X is the test vehicle for the Ares I, which is part of the C…
KSC-2009-1667
CAPE CANAVERAL, Fla. –– In High Bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, a second roll control system module is ready to be installed in an Ares I-X segment.  Ares I-X is the test vehicle for the Are…
KSC-2009-2893
CAPE CANAVERAL, Fla. –  In the transfer aisle of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, a crane is attached to the fifth segment simulator assembly for the Ares I-X.  The crane will lift and move the segmen…
KSC-2009-3709
CAPE CANAVERAL, Fla. –   In Vehicle Assembly Building high bay 4, cables from an overhead crane lower ballast into segment 7 for the Ares I-X  rocket. These ballast assemblies are being installed in the upper stage segments 1 and 7 and will…
KSC-2009-1393
CAPE CANAVERAL, Fla. –  In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the Ares I-X fifth segment simulator assembly (center right) joins other segments located in High Bay 4.  Ares I-X is the flight test vehicl…
KSC-2009-3739
CAPE CANAVERAL, Fla. - The towering 327-foot-tall Ares I-X rocket moves away from the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida. The rocket's slow, 4.2-mile journey to Launch Pad 39B began at 1:39 a.m. EDT.    The…
KSC-2009-5549
CAPE CANAVERAL, Fla. –    At Astrotech in Titusville, Fla., the Ares I-X forward skirt, wrapped in a protective cover, is lifted by a crane for a move to a transporter.  The segment will be transferred to the Assembly and Refurbishment Faci…
KSC-2009-1303
CAPE CANAVERAL, Fla. –   In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, this platform is lifted from an upper level in high bay 3.  Its removal is part of the refurbishment of the facility for the Constellation…
KSC-2009-1351
CAPE CANAVERAL, Fla.  –  In the Assembly and Refurbishment Facility at NASA's Kennedy Space Center, the aft skirt for the Ares 1-X rocket has been lowered onto another stand. The segment is being moved onto a machine shop work stand for dri…
KSC-08pd1862
CAPE CANAVERAL, Fla. –– In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, technicians are seen inside the Ares I-X segment installing the roll control system. Ares I-X is the test vehicle for the Ares…
KSC-2009-2742
CAPE CANAVERAL, Fla. –   Inside the Assembly and Refurbishment Facility, or ARF, at NASA's Kennedy Space Center in Florida, workers begin removing the protective cover from around the Ares I-X forward skirt. The forward skirt is the initial…
KSC-2009-1310
CAPE CANAVERAL, Fla. –  One of the Ares I-X roll control system modules is moved into place on the upper stage simulator for a fit check.  The hardware is in high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center. The sy…
KSC-2009-1534
CAPE CANAVERAL, Fla. – In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, a ballast assembly is lowered into the Ares I-X segment 7 (at center). Ballast assemblies are being installed in the upper stag…
KSC-2009-1215
CAPE CANAVERAL, Fla. –  In the Vehicle Assembly Building's High Bay 4 at NASA's Kennedy Space Center in Florida, the Ares I-X forward assembly has joined other segments on the floor. Ares I-X is the flight test vehicle for the Ares I, a com…
KSC-2009-3706
CAPE CANAVERAL, Fla. –  Cranes begin rotating the Ares I-X motor segment to a vertical position in order to transfer it to a work stand in the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida.  Four segments…
KSC-2009-2331
CAPE CANAVERAL, Fla. - The Ares I-X rocket heads toward Launch Pad 39B at NASA's Kennedy Space Center in Florida, riding atop a crawler-transporter. The 4.2-mile trip to the pad from the massive Vehicle Assembly Building began at 1:39 a.m.…
KSC-2009-5548