CAPE CANAVERAL, Fla. – Technicians in the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center get ready to move an IMAX 3D camera for installation on the Orbital Replacement Unit Carrier, or ORUC, (in the background) to be i…
KSC-2009-2338
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the IMAX 3D camera is lowered toward the Orbital Replacement Unit Carrier, or ORUC, for installation. The carrier will be installed in space…
KSC-2009-2344
CAPE CANAVERAL, Fla. – Technicians in the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center prepare to lift an IMAX 3D camera for installation on the Orbital Replacement Unit Carrier, or ORUC, to be installed in space shut…
KSC-2009-2340
CAPE CANAVERAL, Fla. -- In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a worker from NASA's Goddard Space Flight Center installs a pallet support strut on the Super Lightweight Interchangeable Ca…
KSC-08pd2098
CAPE CANAVERAL, Fla. -- In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, workers from NASA's Goddard Space Flight Center install the pallet support struts on the Super Lightweight Interchangeable C…
KSC-08pd2094
CAPE CANAVERAL, Fla. -- In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a worker from NASA's Goddard Space Flight Center installs a pallet support strut on the Super Lightweight Interchangeable Ca…
KSC-08pd2096
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Atlantis' payload bay is filled with hardware for the STS-125 mission to service NASA's Hubble Space Telescope. From the bottom are the Flight…
KSC-2009-2980
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Atlantis' payload bay is filled with hardware for the STS-125 mission to service NASA's Hubble Space Telescope.  At the bottom is the Flight S…
KSC-2009-2983
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, a crane lifts the Flight Support System carrier from the payload canister. It will be moved to a stand in the PHSF. The…
KSC-08pd3251
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, a crane lowers the Flight Support System carrier onto a stand in the PHSF. The carrier contains hardware for the STS-125…
KSC-08pd3253
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, workers remove the Super Lightweight Interchangeable Carrier, or SLIC, from the payload canister which transported the H…
KSC-08pd3236
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, the Super Lightweight Interchangeable Carrier, or SLIC, is lifted from the payload canister which transported the Hubble…
KSC-08pd3235
CAPE CANAVERAL, Fla. -  In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the Multi-Use Logistic Equipment, or MULE, carrier is moved toward the payload canister. The carrier is one of four associated with the STS-…
KSC-08pd2637
CAPE CANAVERAL, Fla. -  In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the Multi-Use Logistic Equipment, or MULE, carrier is lowered toward the payload canister.  It will be placed next to the Flight Support Sys…
KSC-08pd2639
CAPE CANAVERAL, Fla. - Space shuttle Atlantis rolls via the crawlerway to the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida after rolling back from Launch Pad 39A. In the VAB, Atlantis will await launch on its STS-125…
KSC-08pd3274
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, a crane lifts the Multi-Use Lightweight Equipment, or MULE, carrier from the payload canister. It will be moved to a sta…
KSC-08pd3255
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, technicians lower into place the IMAX 3D camera on the Orbital Replacement Unit Carrier, or ORUC, for installation. The carrier will be insta…
KSC-2009-2347
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the IMAX 3D camera is moved toward the Orbital Replacement Unit Carrier, or ORUC, for installation. The carrier will be installed in space sh…
KSC-2009-2343
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, technicians lower into place the IMAX 3D camera on the Orbital Replacement Unit Carrier, or ORUC, for installation. The carrier will be insta…
KSC-2009-2346
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the IMAX 3D camera is lifted from a stand to be installed on the Orbital Replacement Unit Carrier, or ORUC.  The carrier will be installed in…
KSC-2009-2341
CAPE CANAVERAL, Fla. -- In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, this elevated view shows three carriers undergoing processing for space shuttle Atlantis' STS-125 mission to service the Hub…
KSC-08pd2099
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, the payload canister has rolled into the clean-room environment of the Payload Hazardous Servicing Facility for the loading of Hubble hardware and equipment.  The canister wi…
KSC-2009-2650
CAPE CANAVERAL, Fla. -- In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a worker from NASA's Goddard Space Flight Center documents the installation of a pallet support strut on the Super Lightweig…
KSC-08pd2095
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the payload ground-handling mechanism, known as the PGHM, is retracted after installing the payloads in space shuttle Atlantis' payload bay for the STS-125…
KSC-2009-2978
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Atlantis' payload bay is filled with hardware for the STS-125 mission to service NASA's Hubble Space Telescope.  From the bottom are the Fligh…
KSC-2009-2982
Packing light is the idea behind the Zero Launch Mass 3-D Printer. Instead of loading up on heavy building supplies, a large scale 3-D printer capable of using recycled plastic waste and dirt at the destination as construction material woul…
Zero Launch Mass 3D printer
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, a crane lifts the Flight Support System carrier from the payload canister toward a stand in the PHSF. The carrier contai…
KSC-08pd3252
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, workers secure the Orbital Replacement Unit Carrier, or ORUC, onto a stand after it was returned back to the clean room…
KSC-08pd3242
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, the Orbital Replacement Unit Carrier, or ORUC, is lifted from the payload canister which transported the Hubble Space Te…
KSC-08pd3239
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, a crane moves the Multi-Use Lightweight Equipment, or MULE, carrier toward a stand. The carrier contains hardware for th…
KSC-08pd3256
CAPE CANAVERAL, Fla. -  In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, an overhead crane lifts the Multi-Use Logistic Equipment, or MULE, carrier. The carrier is one of four associated with the STS-125 mission t…
KSC-08pd2636
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, a crane lowers the Multi-Use Lightweight Equipment, or MULE, carrier toward a stand. The carrier contains hardware for t…
KSC-08pd3257
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, technicians lower into place the IMAX 3D camera on the Orbital Replacement Unit Carrier, or ORUC, for installation. The carrier will be insta…
KSC-2009-2345
CAPE CANAVERAL, Fla. – Technicians in the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center move an IMAX 3D camera toward the Orbital Replacement Unit Carrier, or ORUC, (in the background)  for installation. The carrier wi…
KSC-2009-2339
CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the IMAX 3D camera is lifted and moved toward the Orbital Replacement Unit Carrier, or ORUC, for installation. The carrier will be installed…
KSC-2009-2342
CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, the payload canister rolls into the clean-room environment of the Payload Hazardous Servicing Facility for the loading of Hubble hardware and equipment.  The canister will de…
KSC-2009-2649
CAPE CANAVERAL, Fla. -- In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a worker from NASA's Goddard Space Flight Center installs a pallet support strut on the Super Lightweight Interchangeable Ca…
KSC-08pd2097
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, the payload ground-handling mechanism, known as the PGHM, is retracted after installing the payloads in space shuttle Atlantis' payload bay, at right, for t…
KSC-2009-2979
CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Atlantis' payload bay is filled with hardware for the STS-125 mission to service NASA's Hubble Space Telescope. At the bottom are the Flight S…
KSC-2009-2981
Moviegoers wear 3D glasses as they watch the World Premiere of "Hubble 3D", screened at the Smithsonian's Air and Space Museum Tuesday evening, March 9, 2010, in Washington. Photo Credit: (NASA/Paul E. Alers)
Hubble IMAX Premier
Nathan Gelino, a research engineer, manually loads materials into the Zero Launch Mass 3-D Printer at Kennedy Space Center’s Swamp Works Tuesday. The 3-D printer heated the pellets to about 600 degrees F and extruded them to produce specime…
Zero Launch Mass 3D Printer
CAPE CANAVERAL, Fla. -  In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, a crane lowers the Multi-Use Lightweight Equipment, or MULE, carrier toward a stand. The carrier contains hardware for…
KSC-08pd3258
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, a crane lifts the Multi-Use Lightweight Equipment, or MULE, carrier from the payload canister. It will be moved to a sta…
KSC-08pd3254
CAPE CANAVERAL, Fla. -  In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, a crane lowers the Multi-Use Lightweight Equipment, or MULE, carrier onto a stand. The carrier contains hardware for th…
KSC-08pd3259
CAPE CANAVERAL, Fla. -  In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, an overhead crane lifts the Multi-Use Logistic Equipment, or MULE, carrier. The carrier is one of four associated with the STS-125 mission t…
KSC-08pd2635
CAPE CANAVERAL, Fla. -  In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, the Multi-Use Logistic Equipment, or MULE, carrier is moved toward the payload canister. The carrier is one of four associated with the STS-…
KSC-08pd2638
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, the Orbital Replacement Unit Carrier, or ORUC, is removed from the payload canister which transported the Hubble Space T…
KSC-08pd3238
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility, or PHSF, at NASA's Kennedy Space Center in Florida, workers watch as the Orbital Replacement Unit Carrier, or ORUC, is lowered from the payload canister which transported t…
KSC-08pd3240