FIRST STAGE AVIONICS HARDWARE IN THE LOOP FACILITY
1001823
CAPE CANAVERAL, Fla. – Segments of a crane are being offloaded at the Operations and Checkout Building at NASA's Kennedy Space Center in Florida.  The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Spa…
KSC-08pd3660
KENNEDY SPACE CENTER, FLA.  -  Mission STS-121 Pilot Mark Kelly (left) and Mission Specialist Piers Sellers (kneeling) get a close look at the Integrated Cargo Carrier at the SPACEHAB facility in Cape Canaveral during a Crew Equipment Inter…
KSC-06pd0733
CAPE CANAVERAL, Fla. – Segments of a crane arrive at the Operations and Checkout Building at NASA's Kennedy Space Center in Florida.  The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florida by…
KSC-08pd3659
The ADvanced SEParation (ADSEP) commercial payload is making use of major advances in separation technology: The Phase Partitioning Experiment (PPE); the Micorencapsulation experiment; and the Hemoglobin Separation Experiment (HSE). Using A…
Microgravity
KENNEDY SPACE CENTER, FLA.  -  Mission STS-121 Pilot Mark Kelly, and Mission Specialist Piers Sellers (kneeling) and Commander Steven Lindsey (right) get a close look at the Integrated Cargo Carrier at the SPACEHAB facility in Cape Canavera…
KSC-06pd0732
CAPE CANAVERAL, Fla. – Segments of a crane are lowered onto the floor of the Operations and Checkout Building at NASA's Kennedy Space Center in Florida.  The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin…
KSC-08pd3661
KENNEDY SPACE CENTER, FLA.  -  While STS-121 Mission Specialist Michael Fossum (center) fixes his glove, Commander Steven Lindsey (left) and Mission Specialist Piers Sellers (right) talk about their next step in the Crew Equipment Interface…
KSC-06pd0734
KENNEDY SPACE CENTER, FLA.  -  Members of the STS-121 crew pose with workers in the SPACEHAB facility in Cape Canaveral during the Crew Equipment Interface Test. The astronauts (in blue suits) are Mission Specialists Piers Sellers and Micha…
KSC-06pd0740
CAPE CANAVERAL, Fla. – Movement of the hook from a new crane are is tested inside the Operations and Checkout Building at NASA's Kennedy Space Center in Florida.  The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockhee…
KSC-08pd4139
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility, STS-128 crew members look over packages of equipment that will accompany the mission.  At left are Pilot Kevin Ford, and Mission Specialists Christer Fuglesang and John "Danny…
KSC-2009-2297
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility, STS-128 crew members look over packages of equipment that will accompany the mission.  From left are Pilot Kevin Ford, Commander Rick Sturckow and Mission Specialists Christer…
KSC-2009-2298
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians monitor the Special Purpose Dexterous Manipulator, known as Dextre, as a crane moves it near its destination onto a pallet.…
KSC-07pd2565
Dr. Weijia Zhou, director of the Wisconsin Center for Space Automation and Robotics at the University of Wisconsin-Madison, inspects the Advanced Astroculture(tm) plant growth unit before its first flight last spring. Coating technology is…
Biotechnology
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians adjust the Special Purpose Dexterous Manipulator, known as Dextre, into position on a pallet.  Processing of the payload is u…
KSC-07pd2568
A test cell for the Mechanics of Granular Materials (MGM) experiment is shown in its on-orbit configuration in Spacehab during preparations for STS-89. The twin locker to the left contains the hydraulic system to operate the experiment. San…
Microgravity
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians monitor the Special Purpose Dexterous Manipulator, known as Dextre, as a crane moves it into position onto a pallet.  Process…
KSC-07pd2563
CGBA, a facility developed by BioServe Space Technologies, a NASA Commercial Generic Bioprocessing Space Center, allows a variety of sophisticated bioprocessing research to be performed using a common device. The Fluids Processing Apparatus…
Microgravity
(DCAM) Diffusion Controlled Crystallization Apparatus for Microgravity Trays mounted in (STES) Single Locker Thermal Enclosure System.
Microgravity
CAPE CANAVERAL, Fla. – Motion of the segments of a new crane is tested inside the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Mar…
KSC-08pd4140
KENNEDY SPACE CENTER, FLA.  -  STS-121 Commander Steven Lindsey  (left) and Mission Specialist Piers Sellers (right) are removing a cover on the trailing umbilical assembly at the SPACEHAB facility in Cape Canaveral during a Crew Equipment…
KSC-06pd0738
The ADvanced SEParation (ADSEP) commercial payload is making use of major advances in separation technology: The Phase Partitioning Experiment (PPE); the Micorencapsulation experiment; and the Hemoglobin Separation Experiment (HSE). Using A…
Microgravity
KENNEDY SPACE CENTER, FLA.  -  STS-121 Mission Specialist Piers Sellers (left)  and Commander Steven Lindsey (right)are practicing removing the cover on the pump module at the SPACEHAB facility in Cape Canaveral during a Crew Equipment Inte…
KSC-06pd0737
KENNEDY SPACE CENTER, FLA.  -  Mission Specialist Piers Sellers (left)  and Commander Steven Lindsey work with the pump module at the SPACEHAB facility in Cape Canaveral during a Crew Equipment Interface Test. This test allows the astronaut…
KSC-06pd0735
Two versions of (PCAM) Protein Crystallization Apparatus for Microgravity, (DCAM) Diffusion Controled Crystallization Apparatus is in the (STES) Single Locker Thermal Enclosure System. Principal Investigator was Dan Carter.
Microgravity
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility, STS-128 crew members look over packages of equipment that will accompany the mission.  At center (with the red cap) is Commander Rick Sturckow; to his left is Mission Speciali…
KSC-2009-2299
Brian Steinert, Deputy Element Discipline Lead Engineer, highlights production floor work areas at Michoud Assembly Facility where Stages hardware is being integrated and assembled.
Brian Steinert highlights work areas at MAF where Stages hardwar
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians guide the Special Purpose Dexterous Manipulator, known as Dextre, as a crane lowers it toward a pallet.  Processing of the pa…
KSC-07pd2566
International Space Station program manager Kirk Shireman addresses station hardware and science teams at NASA's Marshall Space Flight Center.
Kirk Shireman addresses station hardware and science teams
This is a photograph of Dr. von Braun in front of a Saturn rocket hardware transporter. He appears to be addressing a group. Behind him are workers and other NASA officials. There is no date on the photograph. It may have been taken in the…
Wernher von Braun
KENNEDY SPACE CENTER, FLA.  - Members of the STS-121 crew are at the SPACEHAB facility in Cape Canaveral to participate in a Crew Equipment Interface Test. On the top of the stand are Mission Specialists Piers Sellers (left) and Michael Fos…
KSC-06pd0730
KENNEDY SPACE CENTER, FLA.  -  STS-121 Mission Specialist Piers Sellers (left)  and Commander Steven Lindsey (right) are practicing removing the cover and strap on the trailing umbilical assembly at the SPACEHAB facility in Cape Canaveral d…
KSC-06pd0739
CAPE CANAVERAL, Fla. – Motion of the segments of a new crane is tested inside the Operations and Checkout Building at NASA's Kennedy Space Center in Florida.  The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Ma…
KSC-08pd4138
CAPE CANAVERAL, Fla. – Segments of a new crane are tested inside the Operations and Checkout Building at NASA's Kennedy Space Center in Florida.  The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Spac…
KSC-08pd4137
KENNEDY SPACE CENTER, FLA.  - Mission Specialist Michael Fossum looks at the pump module at the SPACEHAB facility in Cape Canaveral during a Crew Equipment Interface Test. This test allows the astronauts to become familiar with equipment th…
KSC-06pd0731
KENNEDY SPACE CENTER, FLA.  -  Mission Specialist Piers Sellers (left)  and Commander Steven Lindsey (right) are working with the pump module at the SPACEHAB facility in Cape Canaveral during a Crew Equipment Interface Test. This test allow…
KSC-06pd0736
This archival photo shows engineers at NASA's Jet Propulsion Laboratory working on the 10-sided central structure, or "bus," of the Voyager 2 spacecraft on February 24,1977.  https://photojournal.jpl.nasa.gov/catalog/PIA21478
Voyager 2 Flight Hardware
CAPE CANAVERAL, Fla. – Segments of a crane are moved into the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florid…
KSC-08pd3662
Evolution of Furnaces for Crystal Growth. Left view: Crystal Growth Furnace (CGF) Right view: Advanced Automated Directional Solidification Furnace (AADSF)
Microgravity
This is a computer generated model of a ground based casting. The objective of the therophysical properties program is to measure thermal physical properties of commercial casting alloys for use in computer programs that predict soldificati…
Microgravity
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility, STS-128 crew members look over packages of equipment that will accompany the mission.   At left are Mission Specialists Patrick Forrester and Jose Hernandez.  At right are Com…
KSC-2009-2300
DAVID OSBORNE, MACHINIST WITH AERIE AEROSPACE LLC, MEASURES HOLE SPREAD PRIOR TO START OF PRECISION MACHINING OF MSA FLIGHT HARDWARE.
DAVID OSBORNE CHECKS PRECISION MACHINING OF MSA FLIGHT HARDWARE
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, a crane lifts the Special Purpose Dexterous Manipulator, known as Dextre, high above the heads of the workers below to a position on a pa…
KSC-07pd2564
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians monitor the Special Purpose Dexterous Manipulator, known as Dextre, as a crane moves it into position on a pallet.  Processin…
KSC-07pd2567
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians prepare the Special Purpose Dexterous Manipulator, known as Dextre, for its move onto a pallet. Processing of the payload is…
KSC-07pd2561
Leonardo Barreda inspects SLS Core Stage Thruster Vector Control Hardware.
Leonardo Barreda inspects SLS Core Stage Thruster Vector Control
SSME Hardware Simulation Laboratory at Marshall Space Flight Center is the facility that verifies the software which controls SSME prior to each Space Shuttle flight
Space Shuttle Project
S74-19677 (April 1974) --- This crystal of Germanium Selenide (GeSe) was grown under weightless conditions in an electric furnace aboard the Skylab space station. Experiment M556, Vapor Growth of IV-VI Compounds, was conducted as a comparat…
SKYLAB (SL)-3 - EXPERIMENT HARDWARE