A planetary protection engineer at NASA's Jet Propulsion Laboratory prepares samples for analysis on March 20, 2024. The samples, swabbed from the surfaces of the agency's Europa Clipper spacecraft during its construction, were collected to…
Preparing for Planetary Protection Analysis
The massive high-gain antenna for NASA's Europa Clipper mission is complete. The antenna is nearly 10 feet (3 meters) wide and will be integrated along with other telecommunications hardware into the spacecraft's propulsion module. The ante…
Standing Tall: Europa Clipper's High-Gain Antenna
NASA's Jet Propulsion Laboratory in Southern California is building the spectrometer for the agency's Europa Clipper mission. Called the Mapping Imaging Spectrometer for Europa (MISE), it is seen in the midst of assembly in a clean room at…
The Mapping Imaging Spectrometer for Europa (MISE) Science Instrument
A mechanical engineer in a clean room at the Johns Hopkins Applied Physics Laboratory (APL) in Laurel, Maryland, installs the detector electronics for the engineering model of the Wide Angle Camera (WAC), one of two cameras that make up the…
Europa Clipper's Europa Imaging System in the Works
The main body of NASA's Europa Clipper spacecraft has been delivered to the agency's Jet Propulsion Laboratory in Southern California, where, over the next two years, engineers and technicians will finish assembling the craft by hand before…
Europa Clipper's Core
Engineers in a clean room at NASA's Jet Propulsion Laboratory in Southern California build the nadir deck for NASA's Europa Clipper spacecraft. The deck will stabilize the spacecraft's sensors and help the mission team ensure its instrument…
Building a Nadir Deck for Europa Clipper
Europa Clipper technicians and engineers at NASA's Jet Propulsion Laboratory in Southern California work together in a cleanroom on Sept. 12, 2019. They bond thermal tubing to the spacecraft's Radio Frequency (RF) panel, which was built by…
Europa Clipper's Thermal Tubing
This artist's concept depicts NASA's Europa Clipper spacecraft in orbit around Jupiter.  Scientists believe Jupiter's icy moon Europa harbors a vast internal ocean that may have conditions suitable for supporting life. While orbiting Jupite…
Europa Clipper Artist's Concept
Engineers and technicians work together to install reaction wheels on the underside of the main body of NASA's Europa Clipper spacecraft. The integration of the wheels was one of the latest steps of the spacecraft's assembly, test, and laun…
NASA's Europa Clipper: Reaction Wheel Installation
To conduct its detailed investigations of Jupiter's icy moon Europa, NASA's Europa Clipper spacecraft carries a suite of nine science instruments and a gravity experiment that uses its telecommunications system. These components are depicte…
Europa Clipper: Equipped for Discovery (Artist's Concept)
NASA's Europa Clipper spacecraft will be launched on a SpaceX Falcon Heavy rocket from the agency's Kennedy Space Center in Florida. This graphic shows the expected timeline of milestones immediately following liftoff if the mission launche…
Europa Clipper Launch Ascent Timeline
Engineers at the Johns Hopkins Applied Physics Laboratory (APL) in Laurel, Maryland, inspect the propulsion module of NASA's Europa Clipper spacecraft. In 2022, this major piece of hardware, designed and built at APL, will ship to NASA's Je…
Europa Clipper: Propulsion Module Inspection
Science instruments and other hardware for NASA's Europa Clipper spacecraft will come together in the mission's final phase before launching to Jupiter's icy moon Europa in 2024.  https://photojournal.jpl.nasa.gov/catalog/PIA25125
NASA Begins Assembly of Europa Clipper Spacecraft
This artist's concept depicts NASA's Europa Clipper spacecraft in orbit at Jupiter as it passes over the gas giant's icy moon Europa (lower right). Scheduled to arrive at Jupiter in April 2030, the mission will be the first to specifically…
Europa Clipper in the Shadow of Jupiter (Artist's Concept)
Technicians in a clean room at NASA's Goddard Space Flight Center in Greenbelt, Maryland, check the fit of the upper and lower cylinders of the propulsion module core of NASA's Europa Clipper spacecraft on Oct. 15, 2020. The stacked cylinde…
Stacked Cylinders: Europa Clipper Propulsion Module
NASA's Europa Clipper spacecraft will carry a special message when it launches in October 2024 and heads toward Jupiter's moon Europa. The moon shows strong evidence of an ocean under its icy crust, with more than twice the amount of water…
Europa Clipper's 'Water Words'
The main body of NASA's Europa Clipper spacecraft is seen in its shipping container, just after arriving aboard a C-17 cargo plane at March Air Reserve Base in Riverside County, California. From there it was delivered by truck to the agency…
NASA's Europa Clipper Arrives in Southern California
NASA's Europa Clipper is seen here on Aug. 21, 2024, in a clean room at the agency's Kennedy Space Center in Florida. The photo was taken as engineers and technicians deployed and tested the spacecraft's giant solar arrays, each of which me…
Testing Europa Clipper's Solar Arrays
This image is a simulation of how NASA's Europa Clipper will understand which areas of the Jovian moon Europa are warm and active by studying the moon's thermal emissions. Scientists based this image on a model of data from NASA's Galileo m…
Simulated View of Thermal Emissions from Europa
The vault, with nadir deck attached, of NASA's Europa Clipper is prepared to be moved to the High Bay 1 clean room of the Spacecraft Assembly Facility at NASA's Jet Propulsion Laboratory in Southern California. Made of aluminum, the vault w…
NASA's Europa Clipper: Vault and Nadir Deck on the Move
The propulsion module for NASA's Europa Clipper, the main body of the spacecraft, is nearing completion at Johns Hopkins Applied Physics Laboratory (APL) in Laurel, Maryland. The module consists of two stacked cylinders that stand almost 10…
Europa Clipper's Propulsion Module
Contamination control engineers in a clean room at NASA's Goddard Space Flight Center in Greenbelt, Maryland, evaluate a propellant tank before it is installed in NASA's Europa Clipper spacecraft. The tank is one of two that will be used to…
Prepping Europa Clipper's Propulsion Tanks
Engineers and technicians examine and test the first of NASA's Europa Clipper's science instruments to be delivered to the agency's Jet Propulsion Laboratory in Southern California. The ultraviolet spectrograph, called Europa-UVS and led by…
NASA's Europa Clipper's Ultraviolet Spectrograph Is Delivered
All four of the reaction wheels installed onto NASA's Europa Clipper are visible in this photo, which was shot from underneath the main body of the spacecraft while it is being assembled at the agency's Jet Propulsion Laboratory in Southern…
NASA's Europa Clipper Reaction Wheels Installed
NASA's Europa Clipper spacecraft boasts its new 10-foot (3-meter) high-gain antenna, after its Aug. 14, 2023, installation in High Bay 1 of the Spacecraft Assembly Facility at the agency's Jet Propulsion Laboratory in Southern California. T…
Powerful Antenna Installed On Europa Clipper
This artist's concept shows how scientists think the thin atmosphere on Jupiter's moon Europa is formed. It illustrates how the impact of high-energy, charged particles can kick up material from the surface and how possible plumes might als…
Creation of Europa's Atmosphere (Artist's Concept)
Included in the payload of science instruments for NASA's Europa Clipper is the Europa Imaging System (EIS) Wide Angle Camera (WAC). Here, mechanical engineers at the Johns Hopkins Applied Physics Laboratory (APL) in Laurel, Maryland, set u…
Europa Imaging System Wide Angle Camera
Mission members celebrate during the successful launch of NASA's Europa Clipper spacecraft on Oct. 14, 2024, in the Mission Support Area at NASA's Jet Propulsion Laboratory in Southern California. The spacecraft is bound on a 5½-year, 1.8 b…
Europa Clipper Launch Team at JPL's Mission Control
A test model of the boom that will be used for the magnetometer aboard NASA's Europa Clipper spacecraft is readied in NASA's Jet Propulsion Laboratory in Southern California. Called a dynamic test model, it is an exact duplicate of the Euro…
Europa Clipper Magnetometer (ECM) Boom
This artist's concept depicts NASA's Europa Clipper spacecraft approaching Jupiter and its icy moon Europa. Scheduled to arrive at Jupiter in April 2030, Europa Clipper will orbit the gas giant, and will be the first mission to specifically…
Europa Clipper Approaches Its Target (Artist's Concept)
Members of the media viewed NASA's Europa Clipper spacecraft in High Bay 1 in the historic Spacecraft Assembly Facility at the agency's Jet Propulsion Laboratory on April 11, 2024. The largest spacecraft NASA has ever built for a planetary…
JPL Shows Off Europa Clipper in the Clean Room
NASA's Europa Clipper spacecraft will carry a special message when it launches in October 2024 and heads toward Jupiter's moon Europa. The moon shows strong evidence of an ocean under its icy crust, with more than twice the amount of water…
Europa Clipper's 'Golden Record'
Engineers install a 2-foot-wide reaction wheel onto the main body of NASA's Europa Clipper spacecraft at the agency's Jet Propulsion Laboratory in Southern California. In all, four wheels were integrated onto the spacecraft, which is being…
NASA's Europa Clipper Reaction Wheel in Process
This animation shows how NASA's Europa Clipper spacecraft will orbit Jupiter and perform 49 flybys of Europa during its prime mission. The center orange dot represents Jupiter, with the simplified circular orbits of four of the planet's moo…
Portion of Europa Clipper's Tour at Jupiter (Animation)
This artist's concept depicts NASA's Europa Clipper spacecraft as it orbits Jupiter and passes over the gas giant's ice-covered moon Europa. Scheduled to arrive at Jupiter in April 2030, the mission will be the first to specifically target…
Europa Clipper Explores an Icy Ocean World (Artist's Concept)
Engineers and technicians in a clean room at NASA's Goddard Space Flight Center in Greenbelt, Maryland, integrate the tanks that will contain helium onto the propulsion module of NASA's Europa Clipper spacecraft. The 10-foot-tall (3-meter-t…
Europa Clipper Propulsion Module: Integration Underway
With its solar arrays and antennas fully extended, the Europa Clipper spacecraft stretches out larger than a basketball court: approximately 100 feet (30.5 meters) long and 58 feet (17.6 meters) wide. Depicted in this artist's concept again…
Europa Clipper: NASA's Largest Planetary Spacecraft (Artist's Concept)
This artist's concept depicts NASA's Europa Clipper spacecraft silhouetted against Jupiter as it passes over the gas giant's icy moon Europa (bottom center). Scheduled to orbit Jupiter beginning in April 2030, the mission will be the first…
Europa Clipper Spies Jupiter and Europa (Artist's Concept)
Engineers and technicians install a 10-foot (3-meter) high-gain antenna on NASA's Europa Clipper spacecraft on Aug. 14, 2023. The orbiter is being assembled in the clean room of the High Bay 1 clean room of the Spacecraft Assembly Facility…
Europa Clipper's High-Gain Antenna Installed
Engineers and technicians use a crane to lift the main body of NASA's Europa Clipper spacecraft and position it in the High Bay 1 clean room of the Spacecraft Assembly Facility at the agency's Jet Propulsion Laboratory in Southern Californi…
The Lift: NASA's Europa Clipper Moves Into Position
The build of a high-gain antenna, a nearly 10-foot-wide (3-meter-wide) dish, is underway for NASA's Europa Clipper spacecraft. The dish antenna, seen here face down, is being fabricated at aerospace vendor Applied Aerospace Structures Corpo…
Europa Clipper: High-Gain Antenna Under Construction
NASA's Europa Clipper is tasked with up-close study of Jupiter's enigmatic moon Europa, which orbits the gas giant within a band of powerful radiation generated by the planet's strong magnetic field. The relative intensity of Jupiter's radi…
Europa Clipper's Elliptical Orbit
 NASA's Europa Clipper spacecraft is seen in the main clean room of the Spacecraft Assembly Facility at the agency's Jet Propulsion Laboratory in Southern California on Jan. 19, 2024. The tent around the spacecraft was erected to support el…
Europa Clipper With Instruments Aboard
The main body of NASA's Europa Clipper spacecraft has been delivered to the agency's Jet Propulsion Laboratory in Southern California, where, over the next two years, engineers and technicians will finish assembling the craft by hand before…
Revealing Europa Clipper's Core
NASA's Europa Clipper spacecraft is seen in the 85-foot-tall, 25-foot-wide (26-meter-by-8-meter) vacuum chamber, known as the Space Simulator, at the agency's Jet Propulsion Laboratory in Southern California in February 2024. Shortly after…
Europa Clipper Prepares for Test in Space Simulator
Engineers install 2-foot-wide reaction wheels onto the main body of NASA's Europa Clipper spacecraft at the agency's Jet Propulsion Laboratory in Southern California. In all, four wheels were integrated onto the spacecraft, which is being a…
NASA's Europa Clipper Gets Its Reaction Wheels
Included in the payload of science instruments for NASA's Europa Clipper is the Plasma Instrument for Magnetic Sounding (PIMS). Scientists will use PIMS to study the characteristics of plasma around Europa to better understand the moon's ic…
Preparing NASA's Europa Clipper's Plasma Instrument
Engineers and technicians in a clean room at NASA's Jet Propulsion Laboratory in Southern California stand between the thick-walled aluminum vault and its duplicate (at rear) that they helped build for the agency's Europa Clipper spacecraft…
Complete: Europa Clipper Vault and Its Twin