CAPE CANAVERAL, Fla. –  In the Space Station Processing Facility, STS-130 Mission Specialist Kathryn Hire (second from right) gets a close look at hardware associated with the Cupola, part of the payload on the mission to the International…
KSC-2009-1539
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility, STS-130 Mission Specialist Kathryn Hire sits inside the Cupola, part of the payload on the mission to the International Space Station.  The seven-windowed module will be used…
KSC-2009-1542
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility, STS-130 Pilot Terry Virts Jr. moves closer to the Cupola, part of the payload on the mission to the International Space Station, to get a better look. The seven-windowed modul…
KSC-2009-1540
Overall view of the Cupola Module.  Photo was taken during Expedition 34.
Cupola Module
ISS044E011632 (07/12/2015) --- Expedition 44 flight engineer and NASA astronaut Scott Kelly seen inside the Cupola, a special module which provides a 360-degree viewing of the Earth and the International Space Station. Kelly is one of two c…
Kelly in the Cupola Module
ISS038-E-000246 (12 Nov. 2013) --- Equipped with seven windows, the Cupola aboard the International Space Station probably has exponentially more beneficial facets than it has windows. Seldom seen without at least two or three heads and bod…
Cupola Module
Earth observation taken through Cupola windows by the Expedition 39 crew. Portions of the ISS are in view. Image was released by astronaut on Twitter.
Earth Observations taken by the Expedition 39 Crew
View of Frank Rubo taking photos with camera in the Cupola Module during Expedition 69.
iss069e030674
ISS034-E-027317 (10 Jan. 2013) --- In the Cupola aboard the Earth-orbiting International Space Station, Canadian Space Agency astronaut Chris Hadfield, Expedition 34 flight engineer, works the controls at the Robotic workstation to maneuver…
Hadfield works robotic controls in the Cupola Module
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility, STS-130 Commander George Zamka (center) and Pilot Terry Virts Jr. (right) look at photos in the camera they used to capture images of the Cupola, part of the payload on the mi…
KSC-2009-1543
CAPE CANAVERAL, Fla. – In In the Space Station Processing Facility, STS-130 Mission Specialist Kathryn Hire holds a piece of hardware associated with the Cupola, part of the payload on the mission to the International Space Station. The sev…
KSC-2009-1544
CAPE CANAVERAL, Fla. –  In the Space Station Processing Facility, STS-130 Commander George Zamka (left), Mission Specialist Kathryn Hire and Pilot Terry Virts Jr. look at a notebook of data for the Cupola, part of the payload on their missi…
KSC-2009-1538
Overall interior view of the Cupola module taken during Expedition 35.
Interior view of the Cupola
ISS039-E-005744 (30 March 2014) --- By the rationale of some observers, this image of Expedition 39 Flight Engineer Steve Swanson could be titled "Return to the Old Stomping Grounds, Five Years Hence," except for the fact that it is difficu…
Swanson in the Cupola
View of Canadian Space Agency (CSA) Chris Hadfield,Expedition 34 Flight Engineer (FE),using still camera,in the Cupola Module.  Photo was taken during Expedition 34.
Hadfield uses still camera in the Cupola Module
ISS034-E-024095 (7 Jan. 2013) --- Canadian Space Agency astronaut Chris Hadfield, Expedition 34 flight engineer, holds a still camera while looking through a window in the Cupola of the International Space Station.
Hadfield uses still camera in the Cupola Module
Survey view of portions of the Cupola Module, Tranquility Node 3, and Pressurized Mating Adapter 3 (PMA-3). Image was taken through a window in the Russian segment of the ISS during Expedition 35.
External Survey from Windows in Mini-Research Modules and Pirs Docking Compartment
iss058e002245 (Jan. 7, 2019) --- The U.S. Cygnus space freighter from Northrop Grumman and its prominent cymbal-shaped UltraFlex solar arrays are pictured as the International Space Station orbited 262 miles above the Atlantic Ocean off the…
The U.S. Cygnus space freighter from Northrop Grumman
CAPE CANAVERAL, Fla. –  In the Space Station Processing Facility, members of the STS-130 crew look over the Cupola, part of the payload on their mission to the International Space Station. From left in the foreground are Commander George Za…
KSC-2009-1537
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility, STS-130 Mission Specialist Kathryn Hire sits inside the Cupola, part of the payload on the mission to the International Space Station. The seven-windowed module will be used a…
KSC-2009-1541
Expedition 31 flight engineer Don Pettit, with only his head visible above a shroud, is photographed in the Cupola Module. Window shutters are closed, and still cameras are positioned in front of each window
Pettit with Cameras in the Cupola
Overall view of the Cupola Module.  Photo was taken during Expedition 38.  Image was released by astronaut on Twitter.
Cupula Module
Exterior view of the Cupola Module with Expedition 39 commander and Japan Aerospace Exploration agency (JAXA) astronaut Koichi Wakata inside, looking out through one of the windows. This image was released by Wakata on Twitter.
View of Wakata in a Cupola Window
View of Canadian Space Agency (CSA) Chris Hadfield,Expedition 34 Flight Engineer (FE),playing guitar in the Cupola Module.  Photo was taken during Expedition 34.
Hadfield plays guitar in the Cupola Module
View of Canadian Space Agency (CSA) Chris Hadfield, Expedition 34 Flight Engineer (FE), playing guitar in the Cupola Module.  Photo was taken during Expedition 34.
Hadfield plays guitar in the Cupola Module
No more images