CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a tractor levels out the gravel after the six-million-pound crawler-transporter passed by on its way from the Vehicle Assembly Building to Launch Pad 39A. The test drive is…
KSC-2012-6200
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 moves away from the Vehicle Assembly Building where it has been undergoing modifications. The test dive is designed to check out modifications to e…
KSC-2012-6182
CAPE CANAVERAL, Fla. -- The installation of new bearings on crawler-transporter 2 is underway in Vehicle Assembly Building High Bay 2 at NASA's Kennedy Space Center in Florida.      Modifications underway on the crawler are designed to ensu…
KSC-2013-3555
CAPE CANAVERAL, Fla. -- In the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, crawler-transporter 2, or CT-2, has been jacked four feet off the floor to facilitate removal of the roller bearing assemblies. After inspec…
KSC-2013-1947
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, prepare crawler-transporter 2, or CT-2, for removal of the roller bearing assemblies. After inspections, new assemblies will be…
KSC-2013-1948
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, are removing cover plates in preparation for replacing the roller bearing assemblies on crawler-transporter 2, or CT-2. The modi…
KSC-2013-2820
CAPE CANAVERAL, Fla. -- Technicians complete the installation of a new bearing on crawler-transporter 2 in Vehicle Assembly Building High Bay 2 at NASA's Kennedy Space Center in Florida.      Modifications underway on the crawler are design…
KSC-2013-3557
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, prepare to jack crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemblies.…
KSC-2013-1844
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, begin jacking crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemblies. Af…
KSC-2013-1927
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, prepare crawler-transporter 2, or CT-2, for removal of the roller bearing assemblies. After inspections, new assemblies will be…
KSC-2013-1946
CAPE CANAVERAL, Fla. -- A truck sprays water on the gravel crawler way at NASA's Kennedy Space Center in Florida as crawler-transporter No. 2 moves out of high bay 2 of the Vehicle Assembly Building. With crawler-transporter modifications c…
KSC-2012-6169
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, prepare to jack crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemblies.…
KSC-2013-1842
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 moves out of high bay 2 of the Vehicle Assembly Building where it has been undergoing modifications. The test drive is designed to check out modifi…
KSC-2012-6164
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 moves along the crawler way toward Launch Pad 39A following modifications to ensure its ability to carry launch vehicles such as the space agency's…
KSC-2012-6185
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, are jacking crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemblies. Afte…
KSC-2013-1929
CAPE CANAVERAL, Fla. -- A technician completes the installation of a new bearing on crawler-transporter 2 in Vehicle Assembly Building High Bay 2 at NASA's Kennedy Space Center in Florida.      Modifications underway on the crawler are desi…
KSC-2013-3556
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, are removing track shoes from crawler-transporter 2, or CT-2, prior to jacking it four feet off the floor to facilitate removal…
KSC-2013-1922
CAPE CANAVERAL, Fla. -- The team that has been modifying crawler-transporter No. 2 inside high bay 2 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida gathered prior to a test drive. The crawler-transporter has been…
KSC-2012-6166
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, are removing cover plates in preparation for replacing the roller bearing assemblies on crawler-transporter 2, or CT-2. The modi…
KSC-2013-2817
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 moves out of high bay 2 of the Vehicle Assembly Building where it has been undergoing modifications. The test dive is designed to check out modific…
KSC-2012-6171
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, are removing cover plates in preparation for replacing the roller bearing assemblies on crawler-transporter 2, or CT-2. The modi…
KSC-2013-2821
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, are removing cover plates in preparation for replacing the roller bearing assemblies on crawler-transporter 2, or CT-2. The modi…
KSC-2013-2818
CAPE CANAVERAL, Fla. -- Technicians keep watch as crawler-transporter No. 2 moves along the crawler way at NASA's Kennedy Space Center in Florida. The crawler-transporter test dive is designed to check out recent modifications to ensure its…
KSC-2012-6173
CAPE CANAVERAL, Fla. -- As crawler-transporter No. 2 moves out of high bay 2 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, technicians keep watch. The crawler-transporter test drive is designed to check out rec…
KSC-2012-6172
CAPE CANAVERAL, Fla. -- A truck sprays water on the gravel crawler way at NASA's Kennedy Space Center in Florida as crawler-transporter No. 2 moves out of high bay 2 of the Vehicle Assembly Building. With crawler-transporter modifications c…
KSC-2012-6174
CAPE CANAVERAL, Fla. -- United Space Alliance Project Manager Mike Parrish sits in the driver's position of crawler-transporter No. 2 which has been undergoing modifications inside high bay 2 of the Vehicle Assembly Building at NASA's Kenne…
KSC-2012-6167
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 is parked outside of the Vehicle Assembly Building. The Crawler-transporter has been undergoing modifications to ensure its ability to carry the sp…
KSC-2012-6176
CAPE CANAVERAL, Fla. -- The installation of new bearings on crawler-transporter 2 is underway in Vehicle Assembly Building High Bay 2 at NASA's Kennedy Space Center in Florida.      Modifications underway on the crawler are designed to ensu…
KSC-2013-3554
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a space shuttle era mobile launcher platform, on the left, sits on pedestals outside the Vehicle Assembly Building. To the right is the mobile launcher that will support the…
KSC-2012-6175
CAPE CANAVERAL, Fla. -- Preparations are underway to install new bearings on crawler-transporter 2 in the Vehicle Assembly Building High Bay 2 at NASA's Kennedy Space Center in Florida.      Modifications underway on the crawler are designe…
KSC-2013-3548
CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, technicians monitor the progress as crawler-transporter 2, or CT-2, is moved from the Vehicle Assembly Building to the Park Site west of the building. The transporter has new…
KSC-2013-1504
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 moves past the Vehicle Assembly Building where it has been undergoing modifications. The test drive is designed to check out modifications to ensur…
KSC-2012-6181
CAPE CANAVERAL, Fla. -- A truck sprays water on the gravel crawler way at NASA's Kennedy Space Center in Florida as crawler-transporter No. 2 moves toward Launch Pad 39A. With crawler-transporter modifications complete, the test drive is de…
KSC-2012-6180
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 arrives at Launch Pad 39A to check out recently completed modifications to ensure its ability to carry launch vehicles such as the space agency's S…
KSC-2012-6201
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 arrives at Launch Pad 39A to check out recently completed modifications to ensure its ability to carry launch vehicles such as the space agency's S…
KSC-2012-6198
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 has been undergoing modifications inside high bay 2 of the Vehicle Assembly Building in preparation to carry the space agency's Space Launch System…
KSC-2012-6163
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 has been undergoing modifications in high bay 2 of the Vehicle Assembly Building. It has been undergoing a test drive checking out modifications to…
KSC-2012-6183
CAPE CANAVERAL, Fla. -- A technician completes the installation of a new bearing on crawler-transporter 2 in Vehicle Assembly Building High Bay 2 at NASA's Kennedy Space Center in Florida.      Modifications underway on the crawler are desi…
KSC-2013-3558
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, prepare to jack crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemblies.…
KSC-2013-1918
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, are preparing to jack crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemb…
KSC-2013-1920
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 moves out of high bay 2 of the Vehicle Assembly Building where it has been undergoing modifications. The test drive is designed to check out modifi…
KSC-2012-6170
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crawler-transporter No. 2 moves out of high bay 2 of the Vehicle Assembly Building where it has been undergoing modifications. The test drive is designed to check out modifi…
KSC-2012-6168
CAPE CANAVERAL, Fla. -- Technicians install a new bearing on crawler-transporter 2 in Vehicle Assembly Building High Bay 2 at NASA's Kennedy Space Center in Florida.      Modifications underway on the crawler are designed to ensure its abil…
KSC-2013-3551
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, are preparing to jack crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemb…
KSC-2013-1917
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, prepare to jack crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemblies.…
KSC-2013-1843
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, the mobile launcher is being prepared to support the space agency's Space Launch System heavy-lift rocket and Orion spacecraft.      NASA's Ground Systems Development and Op…
KSC-2012-6177
CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, are jacking crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemblies. Afte…
KSC-2013-1930
CAPE CANAVERAL, Fla. -- A technician installs a new bearing on crawler-transporter 2 in Vehicle Assembly Building High Bay 2 at NASA's Kennedy Space Center in Florida.      Modifications underway on the crawler are designed to ensure its ab…
KSC-2013-3552