
A crane lifts the airlock from the cargo bay of space shuttle Atlantis in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the shuttle and International Space Station. It…

This illustration is a cutaway view of the external arrangement of the Airlock Module (AM). The aft end of the Docking Adapter mated to the AM, and served as the environmental, electrical, and communications control center. The docking adap…

This photograph depicts the flight article of the Airlock Module (AM) Flight Article being mated to the Fixed Airlock Shroud and aligned in a clean room of the McDornell Douglas Plant in St. Louis, Missouri. The AM enabled crew members to c…

CAPE CANAVERAL, Fla. -- Workers prepare to remove the airlock from the cargo bay of space shuttle Atlantis in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the shuttle…

CAPE CANAVERAL, Fla. -- A crane lifts the airlock from the cargo bay of space shuttle Atlantis in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the shuttle and Internat…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew get a close look at the Remote Manipulator System, or RMS, two robotic arms that support operations on the ou…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew look over equipment related to the scientific airlock in the Kibo pressurized module. The module is part of…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew look over the scientific airlock in the Kibo pressurized module. The module is part of the payload for the…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew look over the scientific airlock in the Kibo pressurized module. The module is part of the payload for the…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew look over equipment related to the scientific airlock in the Kibo pressurized module. The module is part of…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-124 Mission Specialist Michael Fossum gets a close look at the Remote Manipulator System, or RMS, two robotic arms that support opera…

A close-up of a government-reference airlock module for the Gateway Space Station. Mission planning calls for an airlock to be delivered and integrated to Gateway by the crewed Orion spacecraft on the Artemis VI mission after launching on a…

At the control of Expedition Two Flight Engineer Susan B. Helms, the newly-installed Canadian-built Canadarm2, Space Station Remote Manipulator System (SSRMS) maneuvers the Quest Airlock into the proper position to be mated onto the starboa…

A close-up of a government-reference airlock module for the Gateway Space Station. Mission planning calls for an airlock to be delivered and integrated to Gateway by the crewed Orion spacecraft on the Artemis VI mission after launching on a…

STS-49, the first flight of the Space Shuttle Orbiter Endeavour, lifted off from launch pad 39B on May 7, 1992 at 6:40 pm CDT. The STS-49 mission was the first U.S. orbital flight to feature 4 extravehicular activities (EVAs), and the first…

CAPE CANAVERAL, Fla. -- Three fuel cells recently removed from space shuttle Atlantis stand on tables in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The fuel cells produced electricity for shuttles in space by c…

CAPE CANAVERAL, Fla. – A crane lifts the airlock from the cargo bay of space shuttle Atlantis in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the shuttle and Internati…

CAPE CANAVERAL, Fla. – A crane moves the airlock from the cargo bay of space shuttle Atlantis to a waiting trailer in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the…

CAPE CANAVERAL, Fla. – A crane moves the airlock from the cargo bay of space shuttle Atlantis to a waiting trailer in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the…

CAPE CANAVERAL, Fla. – A crane lifts the airlock from the cargo bay of space shuttle Atlantis in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the shuttle and Internati…

This illustration is a cutaway view of the internal arrangement of the Airlock Module (AM). The aft end of the Docking Adapter mated to the AM, and served as the environmental, electrical, and communications control center. The docking adap…

This artist's concept is a cutaway illustration of the Skylab Airlock Module and its characteristics. The aft end of the Docking Adapter mated to the Airlock Module (AM), and served as the environmental, electrical, and communications contr…

CAPE CANAVERAL, Fla. – A crane moves the airlock from the cargo bay of space shuttle Atlantis to a waiting trailer in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew look over the scientific airlock in the Kibo pressurized module. The module is part of the payload for the…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew get a close look at the scientific airlock on Kibo pressurized module. The module is part of the payload for…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-124 Mission Specialist Michael Fossum (right) gets hands-on experience with the scientific airlock in the Kibo pressurized module. T…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew get a close look at equipment on the Japanese Experiment Module, called Kibo, including the Remote Manipulat…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew get a close look at equipment on the Japanese Experiment Module, called Kibo, including the Remote Manipulato…

The Quest Airlock is in the process of being installed onto the starboard side of the Unity Node 1 of the International Space Station (ISS). Astronaut Susan J. Helms, Expedition Two flight engineer, used controls onboard the station to mane…

Once the United States' space program had progressed from Earth's orbit into outerspace, the prospect of building and maintaining a permanent presence in space was realized. To accomplish this feat, NASA launched a temporary workstation, Sk…

This photograph shows the flight article of the mated Airlock Module (AM) and Multiple Docking Adapter (MDA) being lowering into horizontal position on a transporter. Although the AM and the MDA were separate entities, they were in many res…

CAPE CANAVERAL, Fla. – A crane lifts the airlock from the cargo bay of space shuttle Atlantis in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the shuttle and Internati…

CAPE CANAVERAL, Fla. -- Workers prepare to remove the airlock from the cargo bay of space shuttle Atlantis in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the shuttle…

This 1971 photograph was taken during the assembly of the Flight Article of the Skylab Airlock Module (AM). The Am, fabricated by McDornell Douglas under the direction of the Marshall Flight Center, allowed Skylab crew members an exit to pe…

CAPE CANAVERAL, Fla. – A crane moves the airlock from the cargo bay of space shuttle Atlantis to a waiting trailer in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the…

CAPE CANAVERAL, Fla. -- Workers prepare to remove the airlock from the cargo bay of space shuttle Atlantis in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the shuttle…

CAPE CANAVERAL, Fla. -- A crane lifts the airlock from the cargo bay of space shuttle Atlantis in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the shuttle and Internat…

CAPE CANAVERAL, Fla. --Three fuel cells recently removed from space shuttle Atlantis stand on tables in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The fuel cells produced electricity for shuttles in space by co…

CAPE CANAVERAL, Fla. – A crane lifts the airlock from the cargo bay of space shuttle Atlantis in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The airlock was the connecting point between the shuttle and Internati…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-124 Mission Specialist Michael Fossum is one of the crew members getting hands-on experience with equipment that is part of the Kibo…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew get a close look at equipment on the Japanese Experiment Module, called Kibo, including the Remote Manipulat…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-124 Mission Specialist Michael Fossum (facing camera) gets hands-on experience with equipment that is part of the Kibo pressurized m…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew look over equipment for the scientific airlock in the Kibo pressurized module. The module is part of the pa…

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-124 Mission Specialist Michael Fossum (left) gets a close look at equipment on the Japanese Experiment Module, called Kibo, including…

This 1970 photograph shows Skylab's Ultraviolet (UV) Stellar Astronomy experiment, a scientific airlock-based facility/experiment that would study UV spectra of early-type stars and galaxies. The Marshall Space Flight Center had program man…

A close-up of a government-reference airlock module for the Gateway Space Station. Mission planning calls for an airlock to be delivered and integrated to Gateway by the crewed Orion spacecraft on the Artemis VI mission after launching on a…

The Joint Airlock Module for the International Space Station (ISS) awaits shipment to the Kennedy Space Center in the Space Station manufacturing facility at the Marshall Space Flight Center in Huntsville, Alabama. The Airlock includes two…

This is a close-up photograph of the Orbital Workshop (OWS) trash disposal airlock located on the floor of the lower level of the OWS. It provided a means of passing trash from the pressurized habitable area into the unpressurized waste tan…