
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members are examining the orbiter Atlantis, the designated launch vehicle for their mission. From left are Mission Specialists Daniel Burbank, Heidemarie Stefa…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Mission Specialists Dr. Dafydd Williams (standing in the lift) and Tracy Caldwell (seated at right) look over the shuttle arm in Endeavour's pa…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities in Orbiter Processing Facility bay 3 at KSC, STS-118 Mission Specialist Barbara Morgan gets hands-on practice with tools she may use during the flight. The STS-1…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Commander Scott Kelly checks for sharp edges on the port cockpit window of orbiter Endeavour, which is in Orbiter Processing Facility bay 3.…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities in Orbiter Processing Facility bay 3 at KSC, STS-118 crew members get a close look at equipment they will use on their flight. Seen here at center are Mission S…

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, during crew equipment interface test activities, STS-118 Mission Specialist Tracy Caldwell gets a close look at one of the orbiter Endeavour's main engines. The STS-118 mi…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians check the nitrogen tank assembly closely as an overhead crane lifts and moves it to the Express Logistics Carrier 1, or E…

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, United Space Alliance technicians provide lights over the space shuttle Atlantis' cockpit. STS-122 Commander Stephen Frick is inside checking the cockpit for launch readines…

KENNEDY SPACE CENTER, FLA. -- In Endeavour's payload bay in Orbiter Processing Facility bay 2, STS-118 Mission Specialist Barbara Morgan gets some details about the orbiter boom sensor system in front of her. She and other crew members…

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift have removed main engine no. 2 from space shuttle Endeavour. Engine removal is part of the post-landing proce…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the nitrogen tank assembly is lowered onto the Express Logistics Carrier 1, or ELC-1. The carrier is part of the STS-129 payload on s…

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 Mission Specialist Joseph Tanner takes a closer look at the orbiter Atlantis, the designated launch vehicle for the mission.. Looking on (from left) are Mission Speci…

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-122 Commander Stephen Frick checks out the cockpit on space shuttle Atlantis. He and other crew members are at Kennedy Space Center to take part in a crew equipment inte…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Mission Specialists Tracy Caldwell (center) and Dr. Dafydd Williams (right) look over the interior of the payload bay of orbiter Endeavour. Th…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities, members of the STS-118 crew look over the orbiter Endeavour in Orbiter Processing Facility bay 2. Seen here are Mission Specialists Barbara Morgan (standing)…

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 Mission Specialist Daniel Burbank holds a camera that is a mockup of one the crew will use to take photographs on-orbit. At left is Mission Specialist Heidemarie Stefa…

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-122 Pilot Alan Poindexter and Mission Specialists Rex Walheim and Stanley Love practice working with equipment for the mission. The crew is at Kennedy Space Center to ta…

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, members of the STS-122 crew practice handling cameras that will be used during the mission. With the camera is Mission Specialist Leland Melvin. At left is Mission Special…

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-122 crew members practice working with equipment for the mission. From left are Commander Stephen Frick and Mission Specialists Hans Schlegel, Rex Walheim and Stanley Lo…

CAPE CANAVERAL, Fla. – At NASA’s Kennedy Space Center in Florida, space shuttle Atlantis has arrived in the transfer aisle of the Vehicle Assembly Building for the next phase of its launch preparations. The rollover from its hangar, Orbi…

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-3 at NASA's Kennedy Space Center in Florida, members of the STS-130 crew receive a briefing about the processing of space shuttle Endeavour. From left are Mission Specialist Nicolas Patr…

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 Mission Specialist Joseph Tanner practices using a camera that is a mockup of one the crew will use to take photographs on-orbit. With him are Mission Specialists Ste…

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-122 crew members stand next to the space shuttle Atlantis, which is being processed for launch on STS-122. From left are European Space Agency astronaut Leopold Eyharts…

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, a Hyster forklift is moved into position to remove engine no. 2 from space shuttle Endeavour. Engine removal is part of the post-landing processi…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians prepare to lift the nitrogen tank assembly to move it to the Express Logistics Carrier 1, or ELC-1. The carrier is part o…

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-3 at NASA's Kennedy Space Center in Florida, STS-130 Mission Specialist Nicolas Patrick, left, discusses the operation of a camera that will fly on space shuttle Endeavour with his crewm…

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-3 at NASA's Kennedy Space Center in Florida, members of the STS-130 crew inspect space shuttle Endeavour's payload bay. In the right corner, from left are Commander George Zamka, Pilot…

KENNEDY SPACE CENTER, FLA. -- From a lower level in the Orbiter Processing Facility, members of the STS-122 crew check out the landing gear on space shuttle Atlantis, overhead. Dressed in their blue suits are Mission Specialist Leland Melv…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities in Orbiter Processing Facility bay 3 at KSC, STS-118 Mission Specialist Barbara Morgan learns about a tool that is part of the equipment on the flight. The STS-…

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members examine tiles on the orbiter Atlantis, the designated launch vehicle for their mission. From left are Mission Specialists Heidemarie Stefanyshyn-Piper,…

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, workers prepare the tool stowage assembly for installation into space shuttle Atlantis' payload bay. The assembly contains tools and hardwar…

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, during crew equipment interface test activities, STS-118 Mission Specialists Dr. Dafydd Williams (left) and Richard Mastrocchio (right) practice photographing the undersid…

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, members of the STS-122 crew get information about the thermal protection system on space shuttle Atlantis (overhead). From left are Pilot Alan Poindexter, Mission Specialist…

KENNEDY SPACE CENTER, FLA. -- Members of the STS-122 crew take part in harness training in the Orbiter Processing Facility at NASA's Kennedy Space Center. Seen from left are Mission Specialists Stanley Love and Leland Melvin and Pilot Ala…

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, space shuttle Endeavour's main engine no. 2 is moved away from Orbiter Processing Bay 2 after removal from the shuttle. Engine removal is part of the post-landing processing.…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Pilot Charles Hobaugh checks the cockpit windshield of orbiter Endeavour, which is in Orbiter Processing Facility bay 3. The STS-118 mission wil…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities, members of the STS-118 crew address a piece of equipment with a worker in Orbiter Processing Facility bay 2. Mission Specialist Tracy Caldwell holds the pack…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the nitrogen tank assembly is moved toward the Express Logistics Carrier 1, or ELC-1. The carrier is part of the STS-129 payload on s…

CAPE CANAVERAL, Fla. – In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift remove main engine no. 2 from space shuttle Endeavour. Engine removal is part of the post-landing processing.…

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members examine tiles on the orbiter Atlantis, the designated launch vehicle for their mission. From left are Mission Specialists Joseph Tanner, Daniel Burbank…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities, members of the STS-118 crew look over the orbiter Endeavour in Orbiter Processing Facility bay 2. Seen here are (from left), Mission Specialists Tracy Caldwel…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Mission Specialists Tracy Caldwell (left) and Richard Mastrocchio look inside the orbiter Endeavour, which is in Orbiter Processing Facility bay…

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 Mission Specialist Joseph Tanner (foreground) examines tiles on the orbiter Atlantis, the designated launch vehicle for the mission. The crew is at the center for…

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 Mission Specialist Heidemarie Stefanyshyn-Piper practices using a camera that is a mockup of one the crew will use to take photographs on-orbit. At left is Mission Spe…

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, members of the STS-122 crew practice handling cameras that will be used during the mission. Holding the camera at left is Mission Specialist Hans Schlegel. Next to him, fro…

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, members of the STS-122 crew practice handling cameras that will be used during the mission. At left is Mission Specialist Hans Schlegel. At right is Pilot Alan Poindexter.…

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Commander Scott Kelly checks out the midbody of orbiter Endeavour, which is in Orbiter Processing Facility bay 3. The STS-118 mission will be de…

KENNEDY SPACE CENTER, FLA. -- Space shuttle Discovery is ready to roll out of the Orbiter Processing Facility bay 3 on its transporter for the short trip to the Vehicle Assembly Building. In the VAB, the shuttle will be lifted and mated wit…