
CAPE CANAVERAL, Fla. – Suspended by a crane in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the Cupola module moves closer to the workstand at right. The module was delivered to Kennedy by the European…

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility at NASA's Kennedy Space Center in Florida, STS-119 Pilot Tony Antonelli checks the cockpit window of space shuttle Discovery. He and other crew members are at Kennedy for a Crew E…

CAPE CANAVERAL, Fla. -- In the NASA News Center at NASA's Kennedy Space Center, Shuttle Crew Escape System Manager KC Chhipwadia describes for the media the elements of the helmet that is part of the launch and entry suit (seen on the tabl…

KENNEDY SPACE CENTER, FLA. -- Hurtling away from the clouds of smoke and steam, space shuttle Atlantis hurtles into the cloud-streaked sky on mission STS-122 to the International Space Station. Liftoff was on time at 2:45 p.m. EST. The lau…

CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, workers are ready to lift the Orbital Replacement Unit Carrier, or ORUC, to the payload canister. The carrier is one of four associated with…

Craters in Caloris http://photojournal.jpl.nasa.gov/catalog/PIA10603

CAPE CANAVERAL, Fla. – On Launch Pad 17-B at Cape Canaveral Air Force Station in Florida, another solid rocket booster is being lifted into the mobile service tower for mating to the first stage of the Kepler's Delta 2 launch vehicle. The…

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, the cover of the shipping container is lifted to reveal the Multi-Use Lightweight Equipment (MULE) carrier inside. The MULE is part of the pa…

JSC2008-E-035366 (17 April 2008) --- Astronaut Gregory C. Johnson, STS-125 pilot, prepares for a flight in a NASA T-38 trainer jet at Ellington Field near NASA's Johnson Space Center.

CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center, a technician installs a new valve on Atlantis’ external tank after small dings were found on the sealing surface of the quick disconnect system that…

CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, Japanese Aerospace Exploration Agency, or JAXA, technicians deploy an antenna from the Inter Orbit Communication System Extended Fa…

Steve Lindsey, Chief of NASA's Astronaut office, left, and Michael Sufferdini, International Station Program Manager, examine a map of central Kazakhstan as they received information at the Arkalyk airport April 19, 2008 on the landing of…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a worker, left, checks the manifest regarding the supply packages to be stowed in the Multi-Purpose Logistics Module Leonardo for th…

ERNIE WRIGHT, TEST DIRECTOR, MONITORS MOVE OF TEST STAND WITH SIX JWST (JAMES WEBB SPACE TELESCOPE) PRIMARY MIRROR SEGMENT ASSEMBLIES AT MARSHALL'S X-RAY AND CRYOGENIC FACILITY.

S123-E-005947 (13 March 2008) --- In the grasp of the International Space Station's (ISS) robotic Canadarm2, the Canadian-built Dextre robotic system is moved to its place on a station truss while Space Shuttle Endeavour is docked with the…

This image from early October 2008 shows personnel working on the descent stage of NASA Mars Science Laboratory inside the Spacecraft Assembly Facility at NASA Jet Propulsion Laboratory, Pasadena, Calif.

CAPE CANAVERAL, Fla. -- At the Shuttle Landing Facility, or SLF, at NASA's Kennedy Space Center in Florida, workers begin removing the sling from around space shuttle Endeavour. Part of the mate/demate device, the sling enabled Endeavour…

JSC2008-E-009419 (31 Jan. 2008) --- Japan Aerospace Exploration Agency (JAXA) astronaut Akihiko Hoshide (right), STS-124 mission specialist, dons a training version of his shuttle launch and entry suit in preparation for a training session…

ISS018-E-011127 (6 Dec. 2008) --- Raven Ridge, Colorado is featured in this image photographed by an Expedition 18 crewmember on the International Space Station. An important way to unravel Earth?s history is to find and study old rocks tha…

NASA Mars Reconnaissance Orbiter took two images of the larger of Mars two moons, Phobos, within 10 minutes of each other on March 23, 2008. 3D glasses are necessary to view this image.

ISS018-E-009164 (18 Nov. 2008) --- Astronaut Heidemarie Stefanyshyn-Piper, STS-126 mission specialist, participates in the mission's first session of extravehicular activity (EVA) as construction and maintenance continue on the Internationa…

S124-E-008618 (10 June 2008) --- A partial view of International Space Station solar panels and Earth's atmosphere are photographed by a STS-124 crewmember on the International Space Station while Space Shuttle Discovery is docked with the…

CAPE CANAVERAL, Fla. - At the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, STS-126 Pilot Eric Boe peers out the cockpit window of the Shuttle Training Aircraft, or STA, before taking off to practice shuttle landings…

Durham, North Carolina, Students Study Martian Volcanism

S124-E-007941 (9 June 2008) --- STS-124 crewmembers pose for a portrait following a joint news conference with the Expedition 17 crewmembers from the Kibo Japanese Pressurized Module of the International Space Station while Space Shuttle Di…

Young Scientist Challenge YSC was held at Goddard on October 5-6, 2008 sponsored by 3M. It gave students the opportunity to demonstrate their scientific and engineering skills by participating in live demonstrations. Top 3 winners

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, members of the STS-124 crew inspect space shuttle Discovery during a crew equipment interface test. Seen, top to bottom are Pilot Kenne…

CAPE CANAVERAL, Fla. – In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, the Orbital Replacement Unit Carrier for the Hubble Space Telescope is secured on a work platform by workers from NASA's Godd…

S71-59425 (1971) --- Astronaut James A. McDivitt

Windstreaks

ISS016-E-029873 (16 Feb. 2008) --- STS-122 and Expedition 16 crewmembers pose for a group photo following a joint news conference in the Columbus laboratory of the International Space Station while Space Shuttle Atlantis is docked with the…

KENNEDY SPACE CENTER, FLA. -- At NASA Kennedy Space Center's Launch Complex 39, STS-123 Mission Specialist Rick Linnehan takes time out from driving practice of the M-113 armored personnel carrier to pose for a photo. The crew members of s…

Tempe Terra

S124-E-006793 (6 June 2008) --- Astronaut Greg Chamitoff, Expedition 17 flight engineer, works in the newly installed Kibo Japanese Pressurized Module of the International Space Station while Space Shuttle Discovery (STS-124) is docked with…

CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center, a technician removes a valve from Atlantis’ external tank after small dings were found on the sealing surface of the quick disconnect system that ha…

KENNEDY SPACE CENTER, FLA. -- In the hypergolic maintenance facility at NASA's Kennedy Space Center, a technician adjusts equipment during testing of the Ares I-X Roll Control System, or RoCS. The RoCS Servicing Simulation Test is to gath…

JSC2008-E-047965 (4 June 2008) --- Astronaut Andrew J. Feustel, STS-125 mission specialist, dons a training version of his shuttle launch and entry suit in preparation for a training session in the Space Vehicle Mockup Facility at NASA's Jo…

CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center in Florida, space shuttle Endeavour rolls off Launch Pad 39B for the 3.4-mile rollaround to Launch Pad 39A. First motion was at 8:28 a.m. EDT. Endeavour is targeted to launch Nov. 14 on…

VANDENBERG AIR FORCE BASE, Calif. -- Avionics shelf flatness and fillet gap measurements are conducted on the wing of a Pegasus rocket in Building 1555 at Vandenberg AFB. The testing was performed by workers from Advanced Digital Measuring…

KENNEDY SPACE CENTER, FLA. -- At NASA Kennedy Space Center's Launch Pad 39A, the crew for space shuttle Endeavour's STS-123 mission receives instruction on the slidewire basket system at the landing site for the baskets at the base of the p…

VANDENBERG AIR FORCE BASE, Calif. – At Vandenberg Air Force Base in California, at right is the NASA's Interstellar Boundary Explorer, or IBEX, spacecraft. At left are the Star-27 kick motor and nozzle for IBEX “on top” and the adapter cone…

Hooke Crater Dunes

What a Difference a Week Can Make

Looking upward from beneath the ringplane, the Cassini spacecraft spies Saturn's "wave maker" and "flying saucer" moons. Daphnis (8 kilometers, or 5 miles across at its widest point) and its gravitationally induced edge waves are seen at l…

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister is ready to be lifted to the payload changeout room above. The canister contains four carriers holding various equipment for the STS-125 mission…

ISS017-E-011566 (21 July 2008) --- Russian Federal Space Agency cosmonauts Sergei Volkov (foreground) and Oleg Kononenko (left background), Expedition 17 commander and flight engineer, respectively; along with NASA astronaut Greg Chamitoff,…

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a worker prepares the equipment to help close the hatch on the Multi-Purpose Logistics Module Leonardo before it is transferred to a…

S122-E-009907 (18 Feb. 2008) --- Astronaut Daniel Tani, STS-122 mission specialist, poses for a photo near a window on the aft flight deck of Space Shuttle Atlantis shortly after undocking from the International Space Station, which is visi…